Quote 1A

Elphel, Inc. invites the machine shops to Quote manufacturing of the following parts for the new Eyesis 4Pi camera:

Camera Metal Parts

Part	QTY per Unit	Qty Total	Notes
0353-10-23 - Tube Body	1	3	MAKE in USA
0353-10-231B - Tube Body (with bottom lens openings), Rev "B"	1	3	MAKE in USA
0353-10-24A - Tube Body, IMU (rev. "A")	1	3	MAKE in USA
0353-10-25 - Mount Tube	1	3
0353-11-131A - Cap, bottom ring, Revision "A"	1	3
0353-11-132A - GPS cap, top Revision "A"	1	3
0353-11-133A - GPS cap, middle ring, Rev. "A"	1	3
0353-12-401A - Shade fins, top/bottom, Revision "A"	16	50
0353-12-402 - Shade fins, middle	8	25
0353-12-403 - Shade fins, circular	4	12
0353-12-41 - Shade connector plate	8	25
0353-12-42B - Bottom SFE mount, Revision "B"	2	6
0353-13-19 - Connector Housing, eSATA	1	3
0353-13-20 - Connector Panel, eSATA	1	3
0353-19-02 - CF support	1	3
0353-19-17 - Multi-camera PCB Mount, Aluminum	9	28
0353-19-64D - SFE Module, Base, Rev "D"	10	33	MAKE IN USA
0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D"	16	52	MAKE IN USA
0353-19-642 - SFE mount spacer	4	12	MAKE IN USA
0353-19-65B - SFE Plate, revision "B"	26	85	MAKE IN USA
0353-19-66C - Pano head external body top/bottom Rev "C"	2	6
0353-19-671 - Pano head internal body top/bottom, half	4	12
0353-19-68 - Spacer plate	1	3
0353-19-69 - Pano head external body, middle section	1	3
0353-19-70 - Pano head internal body middle, half	2	6
0353-19-71 - PCB Support	8	25
0353-19-72 - PCB Mount Rev. "A"	8	25
0353-19-73A - PCB Rail Mount, back, Revision "A"	6	12
0353-19-732 - PCB Rail Mount, back, top	1	3
0353-19-733 - Riser board support	2	6
0353-19-74B - PCB Rail Mount, front Revision "B"	4	12
0353-19-742 - Bottom unit connector panel	1	3
0353-19-743 - Cable holder	4	12
0353-19-744B - Cable support bracket, Revision "B"	2	6
0353-19-76 - SSD Rail Mount	11	35
0353-19-77 - FPC Holder	27	85
0353-19-771 - Cable clamp	6	12
0353-19-78 - FPC Holder, short	2	6
0353-19-791 - PCB support panel	1	3
0353-19-80A - Rail Support, Top, Revision "A"	1	3
0353-19-81 - Tube Body, Bottom	1	3
0353-19-82 - Tube Lock	1	3
0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm	2	6
0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm	4	12	MAKE in USA
0353-19-841A - Tube Rail, OD=0.25", ID=0.152", l=913mm	8	24	MAKE in USA
0353-19-85 - Ring	1	3
0353-19-86 - Hose Connector, Network	1	3
0353-19-87 - Hose Connector, SATA	1	3
0353-19-88 - Tube Adapter	2	6
0353-19-89 - Tube Lock	4	12
0353-19-90 - IMU Mount, Bottom	1	3
0353-19-91 - IMU Mount, Top	1	3
0353-19-92 - Spacer, IMU Mount	4	12
0353-19-93 - Bracket Fixating	2	8
0353-19-94 - Sensor PCB cover	26	85	MAKE IN USA
0353-19-95 - Tube	78	250	MAKE IN USA
00353-19-97 - Support rod	78	250	MAKE IN USA
00353-19-98 - Support rod cap	78	250	MAKE IN USA
0353-19-99-18 - Compensation ring, l=1.8mm	26	85	MAKE IN USA
0353-19-100 - Antenna plate	1	3
0353-60-04 - Aluminum extrusion for the shade fins,top	10 meters
0353-60-05 - Aluminum extrusion for the shade fins,middle	10 meters

The Quote is requested for the Quantity needed for 3 Units (as listed in column "Qty Total"), and 10 Units.

Please, read the Suppliers Terms and Conditions and send the Proposals by e-mail: supplies@elphel.com