Eyesis4Pi User Guide - Recording

From ElphelWiki
Revision as of 11:10, 22 May 2012 by Oleg (talk | contribs) (Created page with "==Package== * Eyesis4Pi * Switch 3CRDSF9PWR * PC ==Quick Start== * Turn the switch on. <br/><hr/> * Connect the camera's ethernet cables to the PoE enabled ports. Eyesis4Pi defa...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Package

  • Eyesis4Pi
  • Switch 3CRDSF9PWR
  • PC

Quick Start

  • Turn the switch on.

  • Connect the camera's ethernet cables to the PoE enabled ports. Eyesis4Pi default IP addresses:

192.168.0.221-228


  • Connect the PC to the Gigabit port of the switch.

Note: Do not confuse the Gigabit port with the Console port.


  • Configure the PC's network settings:

IP address: 192.168.0.xxx (example, 192.168.0.68)
Mask:       255.255.255.0


Retrieved from "https://wiki.elphel.com/index.php?title=Eyesis4Pi_User_Guide_-_Recording&oldid=11519"