Poky manual

Description

• Building embedded Linux image for Zynq ARMv7 platform - Elphel 10393 board

About

• Yocto Poky revision = 2.0
• Host OS = Kubuntu 14.04.3 LTS x64

Required packages

• Found in Yocto Project mega-manual

Output files

Found in the poky's deploy directory: poky/build/tmp/deploy/images/

These names are listed as they appear in the u-boot configuration header file - actual output files have different names:

• boot.bin+(u-boot-dtb.img) - u-boot as the first stage bootloader = Secondary Program Loader that boots u-boot-dtb.img

• devicetree.dtb - device tree with described interfaces, zynq registers, interrupts and drivers
• uImage - kernel, drivers
• uramdisk.image.gz - applications

Copy them on the micro SD card (FAT partition) > run boot once in the u-boot command line.

Boot options

• Auto unpacking the root file system image to RAM when booting:
  • Check u-boot default environment variables when building the bootloader.
  • Keep uramdisk.image.gz along with all the other files on the FAT partition of (micro)SD card.
• Root file system on EXT2(EXT3,etc.) partition of (micro)SD card.

Setup

• Step 1: Copy the following lines to some_script.sh, modify and run:

#Part 1

git clone -b jethro git://git.yoctoproject.org/poky.git poky
cd poky; git checkout 83b72d8d1fdab2f7727083df59c00d9fa2324169
 
git clone -b jethro https://github.com/Elphel/meta-ezynq.git meta-ezynq
cd meta-ezynq; git checkout dd185f86155c3f9623e058d84f2fb3ddfae0b22c; cd ..

git clone -b jethro https://github.com/Elphel/meta-elphel393.git meta-elphel393
cd meta-elphel393; git checkout f6c78d1d837b83b3d51e1ac962dff435c38f8f0c; cd ..

git clone -b master https://github.com/Xilinx/meta-xilinx.git meta-xilinx
cd meta-xilinx; git checkout 989a6a12010247aebf137d8ad3f6a042da42640a; cd ..

#Part 2 : init environment and auto-fill Yocto's conf-files

CURRENT_PATH=$(dirname $(readlink -f "$0"))
. ./oe-init-build-env

BBLAYERS_CONF="conf/bblayers.conf"

echo "BBLAYERS = \" \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-yocto \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-yocto-bsp \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-ezynq \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-elphel393 \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-xilinx \\" >> $BBLAYERS_CONF
echo "  \"" >> $BBLAYERS_CONF

LOCAL_CONF="conf/local.conf"

# change the MACHINE
echo "MACHINE ?= \"elphel393\"" >> $LOCAL_CONF
# Elphel's MIRROR website, \n is important
echo "MIRRORS =+ \"http://.*/.*     http://mirror.elphel.com/elphel393_mirror/ \n \"" >> $LOCAL_CONF

• Step 2: re-init environment

cd poky
. ./oe-init-build-env

• Step 3: build bootable image (3 targets)

bitbake u-boot-ezynq linux-xlnx core-image-elphel393

Build bootloader

bitbake u-boot-ezynq
or
bitbake u-boot
or
bitbake virtual/bootloader

Output

• poky/build/tmp/deploy/images/boot.bin
• poky/build/tmp/deploy/images/u-boot-dtb.img

Notes

• Since Poky 1.5.1 switched from u-boot-xlnx to u-boot - some of the u-boot-xlnx reached the upstream
• Since Poky 1.5.1 u-boot introduced Kconfig and currently (as of 2016/01/22) is still migrating from autoconf - keeping both build methods working together.

Build kernel

bitbake linux-xlnx
or
bitbake virtual/kernel

Output

• poky/build/tmp/deploy/images/.../uImage (kernel)
• poky/build/tmp/deploy/images/.../devicetree.dtb (or some *.dtb)

Notes

• Kernel version is 4.0, linux-xlnx
• Device Tree Blob is compiled separately in linux-xlnx