Camera Accessories
From ElphelWiki
Lenses
393 series
P/N | Price | Description | |
Case | $55 | Camera case. Specially designed foam mold to hold one Elphel camera with lens plus power supply and cables in convinient to carry around briefcase like box |
For a full overview of prices see the complete Price List 393.
353 series
P/N | Price | Description | |
Case | $55 | Camera case. Specially designed foam mold to hold one Elphel camera with lens plus power supply and cables in convinient to carry around briefcase like box | |
0353-12-11 | $100 | 45° Angle Piece, 45° adapter accessory part can be used as spacer between the sensor frontend and system board (main enclosure) part of the camera. The photograph shows the completely assembled camera with 45° adapter. | |
0353-12-14 | $70 | 90° Angle Piece. 90° adapter accessory part can be used as spacer between the sensor frontend and system board (main enclosure) part of the camera. The photograph shows the completely assembled camera with 90° adapter installed. | |
SFE-A132 | $150 | 135° Angle Piece. A 135° adapter can be created by combining 45° and 90° adapter. Using a very wide angle lens or fisheye this allows easy monitoring of a complete room when installed in a ceiling corner. | |
$22.5 | RS-232 Adapter/Cable is used to connect to the serial port of NC353L-369 cameras. This port outputs all the boot and debug messages and provides system console that can be used for software development - this console allows to control the camera even if the network is misconfigured. This kit consists of 2 parts: 0353-01-04 - DB9 to modular adapter with custom wiring and a 0353-01-05 - 6-wire modular cable with crossover wiring (6-wire modular telephone cable) | ||
0353-02-20 | $15 | USB to RS-232 converter cable - an addition to RS-232 Adapter/Cable that allows to use a host PC's USB port instead of RS232. | |
TBA | $- | Elphel Toolkit - Kubuntu 10.04 LTS GNU/Linux system that can be booted (or optionally installed) and comes with all Elphel relevant software preinstalled. Allows to update the camera firmware (reflash), play a live video-stream and also build a custom firmware image for the camera. | |
PTP1000445 | $950 | Mercurien Outdoor Camera Enclosure weatherproof IP68 single camera outdoor enclosure - specs.PDF | |
PTP1000446 | $1650 | Mercurien, Outdoor 3D Camera Enclosure weatherproof IP68 stereo 3D camera outdoor enclosure - specs.PDF |
For a full overview of prices see the complete Price List 353.