Wishlist

From ElphelWiki
Revision as of 09:11, 5 March 2020 by Oleg (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

As user I noticed some things I wanted to have on my camera, I hope anyone that has ideas can add them here. What features are you waiting for? What software components are still missing that you cannot live without?

This is a legacy page. Information may not reflect the current state of the products or code.

Software

If a project has been completed just add the developer that did it, or is busy on it.

Sensor

Compass

Networking

Fastest Boot

APIs

UDMA support

  • Enable UDMA in the Axis kernel. Needed to support most fast CF cards, will also boost speed on SATA.

Debayer Algorithmn

  • Higher image quality debayer algorithmn FPGA implementation -> VNG

Hardware

What will the next elphel camera most likely entitled Elphel 373 be like?

Power Supply

Sensor

  • Vignetting hardware correction
  • Lens distortion hardware correction
  • Fixed pattern noise (FPN) correction
  • Flash mode for rolling shutter
  • Make image thumbnails (binning 8x8 from DCT[0,0] data)

Position adjustment

  • initial focus/pan/tilt sensor adjustment
  • Square shaped SFE and equidistant holes for easy change of orientation

Interface

  • group VLDS pairs in flexible cable from sensor to board
  • CCD sensors

Sony IMX021

  • designed for DSLRs (possibly the sensor used in Nikon D300 / D90)
  • 12.4 MPix
  • 5.5 µm pixel
  • 0.18 µm technology
  • 28mm x 22.2 mm APS-C sized 1.8" image area (28.4 mm diagonal)
  • 12 bit column ADC
  • 10.4 fps in 12.4 MPix mode
  • on-chip noise reduction
  • parallel A/D for every pixel coloumn

CPU

  • USB2.0 Support

External data sensors support

External control