Todo notes

this is just a list of current issues to work on

'Hard Reset'

It is the last message in the reflashing script, after that camera tries to reboot but fails as the state of the button is latched at the powerup, it is not influenced by reset. So read that bit and and activate "hardware reset" (not the "hard" one) only if the button was not pressed at powerup (it happens when the factory programs the empty flash). If the button was pressed, do not attempt to reboot (it will fail or reflash again if the future bulk-flash daemon is still running) but just output message instead

"Now camera needs to be power-cycled (powered down and then up) to resume normal operation"