10369

10369

10369 board, top view

10369 board, bottom view

10369 Circuit Diagram, Parts List, PCB layout     10369 Gerber files

10369 interface board is an extension board for the Elphel 353/363 series cameras.

• It provides multiple interfaces and peripherals to the camera:
  • SATA port for external disk drives
  • Compact Flash (in "True IDE" mode) and IDE HDD ports (with adapter/riser boards: 103691, 103692)
  • RS-232 port
  • Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ11 external connector)
  • Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
  • Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
  • Fan driver, controlled by the digital thermometer with programmable on/off temperature
  • Clock/calendar with the super-capacitor backup power
  • EEPROM for the board identification and configuration

Connectors

J2 - IDE

Pin	Signal	Notes
1	IDE_RST
2	GND
3	IDE_D[7]
4	IDE_D[8]
5	IDE_D[6]
6	IDE_D[9]
7	IDE_D[5]
8	IDE_D[10]
9	IDE_D[4]
10	IDE_D[11]
11	IDE_D[3]
12	IDE_D[12]
13	IDE_D[2]
14	IDE_D[13]
15	IDE_D[1]
16	IDE_D[14]
17	IDE_D[0]
18	IDE_D[15]
19	GND
20	GND
21	IDE_DMARQ
22	GND
23	IDE_IOW
24	GND
25	IDE_IOR
26	GND
27	IDE_IORDY
28	GND
29	IDE_DMACK
30	GND
31	IDE_INTRQ
32	EXT_OE	not used
33	IDE_A[1]
34	--
35	IDE_A[0]
36	IDE_A[2]
37	IDE_CS0
38	IDE_CS1
39	--
40	GND

103691: Dual CF card adapter/riser board

103692: 1.8" ZIF-type HDD adapter board

103693: External USB connector adapter board