Talk:Wishlist

Interesting suggestions Kimstick! Could you please give us more details what you mean with :

• Flash mode for rolling shutter
• Lens distortion hardware correction

Why would you want the camera to be a motor/servo controller?

-

• Flash mode for rolling shutter

The flash should be synchronized with the image sensor. Or should an flash occur immediately after the reset of sensor or, if an flash occurred in a random point in time, the sensor has to deliver 2 consecutive frames. And knowing the time when an flash of joining them.

It is possible right now with 10369 using external optoisolated I/O. It can produce a pulse to trigger a flash or accept external trigger (in that case there should be sufficient delay between the pulse and a flash - at least equal to a full frame readout/erase time - 1/15sec for the full frame--Andrey.filippov 09:13, 28 October 2008 (CDT)

• Lens distortion hardware correction

http://en.wikipedia.org/wiki/Image_distortion

Why would you want the camera to be a motor/servo controller?

Why not? is easy. And cam can be funny base for robot.