Wishlist
From ElphelWiki
As user I noticed some things I wanted to have on my camera, I hope anyone that has ideas can add them here. What features are you waiting for? What software components are still missing that you cannot live without?
Contents
Software
If a project has been completed just add the developer that did it, or is busy on it.
Sensor
Compass
Networking
- DHCP (timeouted) and DNS-SD
- GigaBit ethernet
- Zeroconf (Rendezvous)
- [OpenSound Control] [OpenSound Control on wikipedia], [introduction to OSC on linuxjournal]
- CF Ethernet card support [CF 10/100 Ethernet cards list]
- CF WiFi card support [WCF54G]
- CF USB card support [SolarExpress] [CFU2]
Fastest Boot
C API
UDMA support
- Enable UDMA in the Axis kernel. Needed to support most fast CF cards, will also boost speed on SATA.
Debayer Algorithmn
- Higher image quality debayer algorithmn FPGA implementation -> VNG
Hardware
What will the next elphel camera most likely entitled Elphel 373 be like?
Power Supply
- optional 5-36V supply over additional jack DC/DC POE TI Article
Sensor
- Vignetting hardware correction
- Lens distortion hardware correction
- Fixed pattern noise (FPN) correction
- Flash mode for rolling shutter
- Make image thumbnails (binning 8x8 from DCT[0,0] data)
Position adjustment
- initial focus/pan/tilt sensor adjustment
Interface
- group VLDS pairs in flexible cable from sensor to board
- CCD sensors
Sony IMX021
- designed for DSLRs (possibly the sensor used in Nikon D300 / D90)
- 12.4 MPix
- 5.5 µm pixel
- 0.18 µm technology
- 28mm x 22.2 mm APS-C sized 1.8" image area (28.4 mm diagonal)
- 12 bit column ADC
- 10.4 fps in 12.4 MPix mode
- on-chip noise reduction
- parallel A/D for every pixel coloumn
CPU
- USB2.0 Support
External data sensors support
- DONE GPS
- DONE Compass
- Dry contact (simply switch event)
- DONE RFID
- Proximity
- Environment sensors: Temperature/Humidity/Pressure/Illuminance/Loudness/.. Open Weather, EL-USB-RT, USBTenki, USB Weather Board, CY3271-EXP1 (PSoC Environmental Sensing Kit)
- Futaba servo captute interface (for robots)
External control
- USB2.0 Support
- Futaba servo control interface (for robots) PSC Pan&Tilt OpenServo Verilog solution Polulu
- Relay control
- CAN support quickcan USB CAN Adapter
- DMX512 support DMX512
- Secure Digital support CF-SD