10353 test

1. "Prod353"

a. Run the test for 10353 in Prod353

   Errors: See Prod353 reports

2. "Twisting"

a. Reboot

b. Turn off and lower auto-exposure: http://192.168.0.9 -> Camera Control Interface (click on the white circle and drag the control)

c. Launch mplayer:  
    from terminal: mplayer rtsp://192.168.0.9:554 -vo x11 -zoom

d. Gently twist and bend the board while mplayer is running.

   Errors: Mplayer crash. 
   Note  : In most cases this error indicates that something is soldered badly, 
           so far it was the AXIS chip and the Micron memory near the Xilinx is suspected)