Difference between revisions of "10338"

From ElphelWiki
Jump to: navigation, search
(10338)
Line 1: Line 1:
 
==10338==
 
==10338==
[[Image:10338top_sm.jpeg|frame|[[Media:10338top.jpeg|10338 board, top view]]]]
 
[[Image:10338bot_sm.jpeg|frame|[[Media:10338bot.jpeg|10338 board, bottom view]]]]
 
[[Image:10338bd.png|frame|[[Media:10338a.pdf|10338 Circuit Diagram, Parts List, PCB layout]] <br/> [[Media:10338a_gerber.tar.gz|10338 rev A Gerber files]]]]
 
 
10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor  to [[353|Elphel Model 353/363 Cameras]].  It is the first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.
 
10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor  to [[353|Elphel Model 353/363 Cameras]].  It is the first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.
  
 
Connectors:
 
Connectors:
 
* 30-pin flex cable connector (J1) for data and power.
 
* 30-pin flex cable connector (J1) for data and power.
 +
 +
 +
{|
 +
|- valign="top"
 +
|[[Image:10338top_sm.jpeg|thumb|[[Media:10338top.jpeg|10338 board, top view]]]]
 +
|[[Image:10338bot_sm.jpeg|thumb|[[Media:10338bot.jpeg|10338 board, bottom view]]]]
 +
|[[Image:10338a.jpeg|170px|thumb|[[Media:10338a.jpeg|10338A board]]]]
 +
|[[Image:10338bd.png|frame|[[Media:10338a.pdf|10338 Circuit Diagram, Parts List, PCB layout]] <br/> [[Media:10338a_gerber.tar.gz|10338 rev A Gerber files]]]]
 +
|}

Revision as of 11:40, 23 November 2011

10338

10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to Elphel Model 353/363 Cameras. It is the first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.

Connectors:

  • 30-pin flex cable connector (J1) for data and power.