Difference between revisions of "10338"

From ElphelWiki
Jump to: navigation, search
 
 
(12 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
==10338==
 
==10338==
[[Image:10338top_sm.jpeg|frame|[[Media:10338top.jpeg|10338 board, top view]]]]
+
10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor  to [[353|Elphel Model 353/363 Cameras]].  It is the first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.
[[Image:10338bot_sm.jpeg|frame|[[Media:10338bot.jpeg|10338 board, bottom view]]]]
 
[[Image:10338bd.png|frame|[[Media:10338asch.pdf|10338 Circuit Diagram]]]]
 
10338 is designed to interface Micron MT9P031/MT9P001 5MPix (2592x1944) sensor  to [[353|Elplhel Model 353/363 Cameras]].  It is a first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.
 
  
 
Connectors:
 
Connectors:
 
* 30-pin flex cable connector (J1) for data and power.
 
* 30-pin flex cable connector (J1) for data and power.
 +
 +
Dimensions 10338 rev.D:
 +
* 27mm x 15mm
 +
 +
Power consumption:
 +
* idle: 3.3V 0.07A
 +
 +
{|
 +
|- valign="top"
 +
|[[Image:10338top_sm.jpeg|thumb|[[Media:10338top.jpeg|10338 board, top view (rev A to C)]]]]
 +
|[[Image:10338bot_sm.jpeg|thumb|[[Media:10338bot.jpeg|10338 board, bottom view (rev A to C)]]]]
 +
|[[Image:10338d.jpeg|170px|thumb|[[Media:10338d.jpeg|10338 rev D and E board]]]]
 +
|[[Image:10338bd.png|frame|[[Media:10338a.pdf|10338 Circuit Diagram, Parts List, PCB layout]] <br/> [[Media:10338a_gerber.tar.gz|10338 rev A Gerber files]] <br/> [[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] ]]
 +
|}
 +
 +
==Links==
 +
* [[FPC_cables|FPC cables]] - click for available lengths - connect sensor to the system board
 +
 +
[[Category: Boards 393]]
 +
[[Category: Boards 353]]

Latest revision as of 16:58, 15 November 2018

10338

10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to Elphel Model 353/363 Cameras. It is the first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.

Connectors:

  • 30-pin flex cable connector (J1) for data and power.

Dimensions 10338 rev.D:

  • 27mm x 15mm

Power consumption:

  • idle: 3.3V 0.07A

Links

  • FPC cables - click for available lengths - connect sensor to the system board