Difference between revisions of "10338D"

From ElphelWiki
Jump to: navigation, search
(10338D)
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==10338D==
+
==10338D, 10338E==
 
[[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]]
 
[[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]]
 
[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]]]]
 
[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]]]]
Line 6: Line 6:
 
Connectors:
 
Connectors:
 
* 30-pin flex cable connector (J1) for data and power.
 
* 30-pin flex cable connector (J1) for data and power.
 +
 +
These boards are compatible with the [[10393]] camera system board.

Revision as of 14:37, 1 December 2017

10338D, 10338E

10338D/10338E is a modification of the earlier 10338 board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to Elphel Model 353 Cameras. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups.

Connectors:

  • 30-pin flex cable connector (J1) for data and power.

These boards are compatible with the 10393 camera system board.