Difference between revisions of "10338D"

From ElphelWiki
Jump to: navigation, search
Line 2: Line 2:
 
[[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]]
 
[[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]]
 
[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]]]]
 
[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]]]]
10338D is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor  to [[353|Elphel Model 353/363 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups.
+
10338D/10338E is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor  to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups.
  
 
Connectors:
 
Connectors:
 
* 30-pin flex cable connector (J1) for data and power.
 
* 30-pin flex cable connector (J1) for data and power.

Revision as of 12:58, 3 November 2015

10338D

10338D/10338E is a modification of the earlier 10338 board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to Elphel Model 353 Cameras. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups.

Connectors:

  • 30-pin flex cable connector (J1) for data and power.