Difference between revisions of "10353 test"
From ElphelWiki
| Line 14: | Line 14: | ||
d. Gently twist and bend the board while mplayer is running. | d. Gently twist and bend the board while mplayer is running. | ||
| − | Errors: Mplayer crash | + | Errors: Mplayer crash. |
Note : In most cases this error indicates that something is soldered badly, | Note : In most cases this error indicates that something is soldered badly, | ||
so far it was the AXIS chip and the Micron memory near the Xilinx is suspected) | so far it was the AXIS chip and the Micron memory near the Xilinx is suspected) | ||
Latest revision as of 22:12, 24 February 2010
1. "Prod353"
a. Run the test for 10353 in Prod353 Errors: See Prod353 reports
2. "Twisting"
a. Reboot b. Turn off and lower auto-exposure: http://192.168.0.9 -> Camera Control Interface (click on the white circle and drag the control) c. Launch mplayer: from terminal: mplayer rtsp://192.168.0.9:554 -vo x11 -zoom d. Gently twist and bend the board while mplayer is running. Errors: Mplayer crash. Note : In most cases this error indicates that something is soldered badly, so far it was the AXIS chip and the Micron memory near the Xilinx is suspected)
