Difference between revisions of "10359 FPGA Simulation"
From ElphelWiki
Okdzhimiev (talk | contribs) |
Okdzhimiev (talk | contribs) |
||
| Line 7: | Line 7: | ||
* read from DDR - done. | * read from DDR - done. | ||
| − | 2. PHASE_SHIFT in DCM is not available currently, because the model had bad constructs | + | 2. PHASE_SHIFT in DCM is not available currently, because the model had bad constructs, but SDCLK(SDNCLK) can be controlled by "phsel". |
==Board tests== | ==Board tests== | ||
Revision as of 15:36, 19 February 2008
The main page for the board is 10359.
Verification
1. Channel 3 simulation:
- DDR initialization through i2c - done.
- write to DDR - done.
- read from DDR - done.
2. PHASE_SHIFT in DCM is not available currently, because the model had bad constructs, but SDCLK(SDNCLK) can be controlled by "phsel".
Board tests
1. I2c check
a. It doesn't work when i assemled project with mcontr and 2 DCMs. b. Started from the beginning. Works. c. Checked i2c four read with 1 start. Works fine. d. Adding DCMs.
2. Check BRAM read/write.
3. Check DDR read/write.
