10359 FPGA Simulation

The main page for the board is 10359.

Verification

1. Channel 3 simulation:

• DDR initialization through i2c - done.
• write to DDR - done.
• read from DDR - done.

2. PHASE_SHIFT in DCM is not available currently, because the model had bad constructs, but SDCLK(SDNCLK) can be controlled by "phsel".

For correct writing/reading from DDR in model set phsel="01" (register=0x1008, value=0x00000004).

Board tests

1. I2c check

a. It doesn't work when i assemled project with mcontr and 2 DCMs.
b. Started from the beginning. Works.
c. Checked i2c four read with 1 start. Works fine.
d. Adding DCMs.

2. Check BRAM read/write.

3. Check DDR read/write.