Difference between revisions of "10369"

From ElphelWiki
Jump to: navigation, search
Line 14: Line 14:
 
** Clock/calendar with the super-capacitor backup power
 
** Clock/calendar with the super-capacitor backup power
 
** EEPROM for the board identification and configuration
 
** EEPROM for the board identification and configuration
−
* Connectors:
+
==== Connectors ====
 +
===== J2 - IDE =====
 +
{| border="1" cellpadding="2"
 +
|-
 +
| Pin || Signal || Notes
 +
|-
 +
| 1 || IDE_RST ||
 +
|-
 +
| 2 || GND ||
 +
|-
 +
| 3 || IDE_D[7] ||
 +
|-
 +
| 4 || IDE_D[8] ||
 +
|-
 +
| 5 || IDE_D[6] ||
 +
|-
 +
| 6 || IDE_D[9] ||
 +
|-
 +
| 7 || IDE_D[5] ||
 +
|-
 +
| 8 || IDE_D[10] ||
 +
|-
 +
| 9 || IDE_D[4] ||
 +
|-
 +
| 10 || IDE_D[11] ||
 +
|-
 +
| 11 || IDE_D[3] ||
 +
|-
 +
| 12 || IDE_D[12] ||
 +
|-
 +
| 13 || IDE_D[2] ||
 +
|-
 +
| 14 || IDE_D[13] ||
 +
|-
 +
| 15 || IDE_D[1] ||
 +
|-
 +
| 16 || IDE_D[14] ||
 +
|-
 +
| 17 || IDE_D[0] ||
 +
|-
 +
| 18 || IDE_D[15] ||
 +
|-
 +
| 19 || GND ||
 +
|-
 +
| 20 || GND ||
 +
|-
 +
| 21 || IDE_DMARQ ||
 +
|-
 +
| 22 || GND ||
 +
|-
 +
| 23 || IDE_IOW ||
 +
|-
 +
| 24 || GND ||
 +
|-
 +
| 25 || IDE_IOR ||
 +
|-
 +
| 26 || GND ||
 +
|-
 +
| 27 || IDE_IORDY ||
 +
|-
 +
| 28 || GND ||
 +
|-
 +
| 29 || IDE_DMACK ||
 +
|-
 +
| 30 || GND ||
 +
|-
 +
| 31 || IDE_INTRQ ||
 +
|-
 +
| 32 || EXT_OE || not used
 +
|-
 +
| 33 || IDE_A[1] ||
 +
|-
 +
| 34 || -- ||
 +
|-
 +
| 35 || IDE_A[0] ||
 +
|-
 +
| 36 || IDE_A[2] ||
 +
|-
 +
| 37 || IDE_CS0 ||
 +
|-
 +
| 38 || IDE_CS1 ||
 +
|-
 +
| 39 || -- ||
 +
|-
 +
| 40 || GND ||
 +
|-
 +
|}
 +
 
 
[[Image:103691_sm.jpeg|frame|[[Media:103691.jpeg|103691: Dual CF card adapter/riser board]]]]
 
[[Image:103691_sm.jpeg|frame|[[Media:103691.jpeg|103691: Dual CF card adapter/riser board]]]]
 
[[Image:103692_sm.jpeg|frame|[[Media:103692.jpeg|103692: 1.8" ZIF-type HDD adapter board]]]]
 
[[Image:103692_sm.jpeg|frame|[[Media:103692.jpeg|103692: 1.8" ZIF-type HDD adapter board]]]]
 
[[Image:103693_sm.jpeg|frame|[[Media:103693.jpeg|103693: External USB connector adapter board]]]]
 
[[Image:103693_sm.jpeg|frame|[[Media:103693.jpeg|103693: External USB connector adapter board]]]]

Revision as of 22:17, 24 June 2008

10369

10369 board, top view
10369 board, bottom view
10369 Circuit Diagram, Parts List, PCB layout     10369 Gerber files

10369 interface board is an extension board for the Elphel 353/363 series cameras.

  • It provides multiple interfaces and peripherals to the camera:
    • SATA port for external disk drives
    • Compact Flash (in "True IDE" mode) and IDE HDD ports (with adapter/riser boards: 103691, 103692)
    • RS-232 port
    • Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ11 external connector)
    • Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
    • Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
    • Fan driver, controlled by the digital thermometer with programmable on/off temperature
    • Clock/calendar with the super-capacitor backup power
    • EEPROM for the board identification and configuration

Connectors

J2 - IDE
Pin Signal Notes
1 IDE_RST
2 GND
3 IDE_D[7]
4 IDE_D[8]
5 IDE_D[6]
6 IDE_D[9]
7 IDE_D[5]
8 IDE_D[10]
9 IDE_D[4]
10 IDE_D[11]
11 IDE_D[3]
12 IDE_D[12]
13 IDE_D[2]
14 IDE_D[13]
15 IDE_D[1]
16 IDE_D[14]
17 IDE_D[0]
18 IDE_D[15]
19 GND
20 GND
21 IDE_DMARQ
22 GND
23 IDE_IOW
24 GND
25 IDE_IOR
26 GND
27 IDE_IORDY
28 GND
29 IDE_DMACK
30 GND
31 IDE_INTRQ
32 EXT_OE not used
33 IDE_A[1]
34 --
35 IDE_A[0]
36 IDE_A[2]
37 IDE_CS0
38 IDE_CS1
39 --
40 GND
103691: Dual CF card adapter/riser board
103692: 1.8" ZIF-type HDD adapter board
103693: External USB connector adapter board
Retrieved from "https://wiki.elphel.com/index.php?title=10369&oldid=4862"