Difference between revisions of "10385-mods"
From ElphelWiki
(Created page with "== Modifications of the 10385B to use with 9-36V DC-DC converter == 1) close JP1 2) open (cut) JP2 3) remove R3 4) replace R4 with 100K (assembled boards have 1.0M instead of...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
== Modifications of the 10385B to use with 9-36V DC-DC converter == | == Modifications of the 10385B to use with 9-36V DC-DC converter == | ||
| − | + | # close JP1 | |
| − | + | # open (cut) JP2 | |
| − | + | # remove R3 | |
| − | + | # replace R4 with 100K (assembled boards have 1.0M instead of 442K, 100K is good for all versions) | |
| − | + | # replace C1 2.2uF x 100V with 10uF x 50V | |
| − | + | # replace CR4, CR5 with [http://www.digikey.com/product-detail/en/nxp-semiconductors/PMEG6020ER,115/568-6529-1-ND/2531816|PMEG6020ER,115] | |
| − | + | # replace L2: [http://www.digikey.com/product-detail/en/bourns-inc/SRN3010-2R2M/SRN3010-2R2MCT-ND/3821504|SRN3010-2R2MCT-ND] 2.2uHx1.9A 3mm x 3mm | |
| − | + | # replace L1: [http://www.digikey.com/product-detail/en/bourns-inc/SRF0905A-251Y/SRF0905A-251YCT-ND/5031117|SRF0905A-251Y] Common Mode Choke, 250uH, 1.2A | |
