Difference between revisions of "10393 power"

From ElphelWiki
Jump to: navigation, search
(3.3V)
(3.3V)
(2 intermediate revisions by the same user not shown)
Line 21: Line 21:
  
 
==3.3V==
 
==3.3V==
 +
* Without power board
 
{|
 
{|
|valign='top'|[[File:10393 power33 1.jpeg|thumb|320px|Fig.3 10393 and cable, see [[10393|schematics]]]]
+
|valign='top'|[[File:10393 power33 1.jpeg|thumb|320px|Fig.3 10393 (J1) and cable, see [[10393|schematics]]]]
|valign='top'|[[File:10393 power33 2.jpeg|thumb|320px|Fig.4 The cable can be connected to any side of the board]]
+
|valign='top'|[[File:10393 power33 2b.jpeg|thumb|320px|Fig.4 Any side can be used]]
 
|valign='top'|[[File:10393 power33 3.jpeg|thumb|320px|Fig.5 Power supply]]
 
|valign='top'|[[File:10393 power33 3.jpeg|thumb|320px|Fig.5 Power supply]]
 
|}
 
|}
  
 
[[Category:393]]
 
[[Category:393]]

Revision as of 13:07, 4 January 2018

Fig.1 power through J3 connector
Fig.2 power through J4 connector

18-75V (48V)

  • camera's DC-DC converter installed: TRACO POWER THD 12-4810WI, IN 18-75V, OUT 3.3V/3500mA

Notes

  • For 48V the recommended connector is J3 (accessible from the back panel)

9-36V (12V)

  • camera's DC-DC converter installed: TRACO POWER THD 12-2410WI, IN 9-36V, OUT 3.3V/3500mA

Notes

  • For 12V the recommended connector is J4 - bypassing diodes reduces voltage drop and the chances of not hitting the lower voltage limit are higher.
  • For 18+ V the recommended connector is J3

Power supply requirements

AC/DC WALL MOUNT ADAPTER

  • 20+ W
    • 48V => 0.42+ A
    • 12V => 1.67+ A

3.3V

  • Without power board
Fig.3 10393 (J1) and cable, see schematics
Fig.4 Any side can be used
Fig.5 Power supply