Difference between revisions of "10393 power"

From ElphelWiki
Jump to: navigation, search
(3.3V)
(Options)
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[File:10393 power j3 j4.jpeg|thumb|350px|Fig.1 power through J3 connector]]
+
[[File:10393 boards 10385.png|thumb|350px|Fig.1 power through J3 connector]]
[[File:10393 power j4.jpeg|thumb|400px|Fig.2 power through J4 connector]]
+
[[File:10393 power j3 j4.jpeg|thumb|350px|Fig.2 power through J3 connector]]
 +
[[File:10393 power j4.jpeg|thumb|400px|Fig.3 power through J4 connector]]
 +
 
 +
==Options==
 +
{| class='wikitable'
 +
!Range
 +
!Power supply
 +
!Power board
 +
|-
 +
|align='left'|'''36-72V''' (default)
 +
| wall adapter (48V)
 +
| 10386
 +
|-
 +
|align='left'|'''18-75V'''
 +
| wall adapter (48V)
 +
| 10385
 +
|-
 +
|align='left'|'''12-36V'''
 +
| wall adapter, battery (12V)
 +
| 10385
 +
|-
 +
|align='left'|'''3.3V'''
 +
| direct, custom
 +
| None
 +
|}
  
 
==18-75V (48V)==
 
==18-75V (48V)==
Line 21: Line 45:
  
 
==3.3V==
 
==3.3V==
 +
* Without power board
 
{|
 
{|
|valign='top'|[[File:10393 power33 1.jpeg|thumb|320px|Fig.3 10393 and cable, see [[10393|schematics]]]]
+
|valign='top'|[[File:10393 power33 1.jpeg|thumb|320px|Fig.4 10393 (J1) and cable, see [[10393|schematics]]]]
|valign='top'|[[File:10393 power33 2.jpeg|thumb|320px|Fig.4 The cable can be connected to any side of the board]]
+
|valign='top'|[[File:10393 power33 2b.jpeg|thumb|320px|Fig.5 Any side can be used]]
|valign='top'|[[File:10393 power33 3.jpeg|thumb|320px|Fig.5 Power supply]]
+
|valign='top'|[[File:10393 power33 3.jpeg|thumb|320px|Fig.6 Power supply]]
 
|}
 
|}
 +
 +
==Powering from batteries==
 +
===12V setup===
 +
Power from any battery with output voltage ranging 12-36V.
 +
 +
===48V setup===
 +
Power from any battery with output voltage ranging 18-75V.
 +
 +
===Example setup and cables for 48V===
 +
* ANTY BATTERY 48V 4A (ANTY or BOOANT, can be found on AliExpress). Enough to power a single camera for several hours. See Fig.7.
 +
* Power cable with an inline fuse and a switch, battery connector came with the battery, the outputs are 2.1mm plugs. Is used to power the camera. See Fig.8.
 +
* Cable with a 48-to-12v converter ([https://www.digikey.com/product-detail/en/cui-inc/PYB20-Q48-S12-DIN/102-3224-ND/4477482 CUI INC PYB15-Q48-S12]). It was used to power an extra network switch which might not be needed. See Fig.9.
 +
* The camera was connected to a laptop running on its own battery.
 +
 +
<gallery widths=300 heights=200 mode=nolines> <!-- caption="Setting up external tool"-->
 +
File:10393 battery48v 1.jpeg| Fig.7 Battery
 +
File:10393 battery48v power cable.jpeg| Fig.8 Power cable
 +
File:10393 battery48v 48-to-12v converter.jpeg| Fig.9 48-to-12v DC DC converter cable
 +
File:10393 battery48v 2.jpeg| Fig.10 48V power setup
 +
File:10393 battery48v all connected.jpeg| Fig.11 48V and extra 12V for something else
 +
</gallery>
 +
  
 
[[Category:393]]
 
[[Category:393]]

Latest revision as of 10:58, 4 September 2018

Fig.1 power through J3 connector
Fig.2 power through J3 connector
Fig.3 power through J4 connector

Options

Range Power supply Power board
36-72V (default) wall adapter (48V) 10386
18-75V wall adapter (48V) 10385
12-36V wall adapter, battery (12V) 10385
3.3V direct, custom None

18-75V (48V)

  • camera's DC-DC converter installed: TRACO POWER THD 12-4810WI, IN 18-75V, OUT 3.3V/3500mA

Notes

  • For 48V the recommended connector is J3 (accessible from the back panel)

9-36V (12V)

  • camera's DC-DC converter installed: TRACO POWER THD 12-2410WI, IN 9-36V, OUT 3.3V/3500mA

Notes

  • For 12V the recommended connector is J4 - bypassing diodes reduces voltage drop and the chances of not hitting the lower voltage limit are higher.
  • For 18+ V the recommended connector is J3

Power supply requirements

AC/DC WALL MOUNT ADAPTER

  • 20+ W
    • 48V => 0.42+ A
    • 12V => 1.67+ A

3.3V

  • Without power board
Fig.4 10393 (J1) and cable, see schematics
Fig.5 Any side can be used
Fig.6 Power supply

Powering from batteries

12V setup

Power from any battery with output voltage ranging 12-36V.

48V setup

Power from any battery with output voltage ranging 18-75V.

Example setup and cables for 48V

  • ANTY BATTERY 48V 4A (ANTY or BOOANT, can be found on AliExpress). Enough to power a single camera for several hours. See Fig.7.
  • Power cable with an inline fuse and a switch, battery connector came with the battery, the outputs are 2.1mm plugs. Is used to power the camera. See Fig.8.
  • Cable with a 48-to-12v converter (CUI INC PYB15-Q48-S12). It was used to power an extra network switch which might not be needed. See Fig.9.
  • The camera was connected to a laptop running on its own battery.