Difference between revisions of "Adjust focal and sensor planes"

From ElphelWiki
Jump to: navigation, search
(Created page with "==Stereo camera== * Remove the screws (Fig.1) * Gently take out the front end (Fig.2) in order not to damage the cable or get it disconnected in the inside - the cable's length i...")
 
m
 
Line 5: Line 5:
 
{|
 
{|
 
|-
 
|-
|[[File:Stereo camera sfes2.jpeg|700px|thumb|Fig.1 Stereo Camera Front End holding screws]]
+
|[[File:Stereo camera sfes2.jpeg|500px|thumb|Fig.1 Stereo Camera Front End holding screws]]
 +
|[[File:Stereo camera cables.jpeg|500px|thumb|Fig.2 Stereo Camera Front End unscrewed]]
 
|-
 
|-
|[[File:Stereo camera cables.jpeg|700px|thumb|Fig.2 Stereo Camera Front End unscrewed]]
+
|[[File:Sfe screws.jpeg|500px|thumb|Fig.3 Sensor Front End back showing adjustment screws]]
|-
 
|[[File:Sfe screws.jpeg|700px|thumb|Fig.3 Sensor Front End back showing adjustment screws]]
 
 
|}
 
|}

Latest revision as of 13:45, 16 December 2013

Stereo camera

  • Remove the screws (Fig.1)
  • Gently take out the front end (Fig.2) in order not to damage the cable or get it disconnected in the inside - the cable's length is enough
  • Adjust the screws shown on Fig.3 - this can be done with the front end still connected to the cable and while the camera is powered on - do it carefully.
Fig.1 Stereo Camera Front End holding screws
Fig.2 Stereo Camera Front End unscrewed
Fig.3 Sensor Front End back showing adjustment screws