Revision as of 10:06, 11 November 2010

Overview

This guide explains how to install ElphelVision on your Elphel camera and a computer running Ubuntu connected to your camera over Ethernet.

This guide assumes that you have successfully downloaded the required files.

Use an FTP client of choice (eg. Filezilla) and connect to your Elphel camera.

Default IP: 192.168.0.9
User: root / PW: pass

Upload the complete "ElphelVision" directory in "elphel/Apertus/camera www/" to the "/mnt/flash/html/" directory of your Elphel camera

You can test if everything worked properly by opening a browser and going to:

http://192.168.0.9/ElphelVision/elphelvision_interface.php?cmd=status  (replace 192.168.0.9 with your Elphel cameras IP).

If you get lots of xml output installation was successful.

Requirements:

sudo apt-get install openjdk-6-jre-headless

recent VLC (careful: Ubuntu maintained software channel is outdated, check: http://www.videolan.org/vlc/download-ubuntu.html for a guide how to get a recent version)

Change the permissions of the *.sh file to enable execution.

Open a terminal and run

./ElphelVision.sh

@@ Line 22: / Line 22: @@
 Requirements:
 * recent Java JRE
+ sudo apt-get install openjdk-6-jre-headless
 * recent VLC (careful: Ubuntu maintained software channel is outdated, check: http://www.videolan.org/vlc/download-ubuntu.html for a guide how to get a recent version)