Difference between revisions of "Control Panel"

From ElphelWiki
Jump to: navigation, search
(TODO)
Line 1: Line 1:
 +
 +
The control panel is a new feature on the Elphel cameras that allows for:
 +
*A quick scan of camera hardware & software status
 +
*A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.
 +
 +
==Current Status==
 
This project is currently in BETA, and can be found at http://''camera address''/UI.html
 
This project is currently in BETA, and can be found at http://''camera address''/UI.html
  
The control panel is a new feature on the Elphel cameras that allows for:
+
The Control Panel can show the following information
*A quick scan of camera hardware status
+
*Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
*A separate report of camera hardware status, this can be sent to Elphel for the aid of troubleshooting the cameras.
+
*Camera Serial Number
 +
*Camera Software Version
 +
*Processes (Daemons) currently running on the camera
 +
*FPGA info
 +
*fpga_sdram_phase
 +
*Cat_interupts
 +
 
 +
You can change the following network settings with the Control Panel
 +
*Camera IP address
 +
*Broadcast address
 +
*Netmask
 +
*Gateway
  
==Upcoming Features==
+
==High Priority Upcoming Features==
 
*An 'advanced' section that refers some of the [[PHP in Elphel cameras | API]] calls for a more thorough call of status.
 
*An 'advanced' section that refers some of the [[PHP in Elphel cameras | API]] calls for a more thorough call of status.
 +
*Ability to reboot camera from panel
 +
*Ability to start/stop/restart certain processes
  
  
 
==TODO==
 
==TODO==
* Elphel support email on the page
+
* Elphel support email and other contact information on the page
 
* Verification of IP and other settings before they are set
 
* Verification of IP and other settings before they are set
 
* A disclaimer  
 
* A disclaimer  

Revision as of 15:27, 29 January 2008

The control panel is a new feature on the Elphel cameras that allows for:

  • A quick scan of camera hardware & software status
  • A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.

Current Status

This project is currently in BETA, and can be found at http://camera address/UI.html

The Control Panel can show the following information

  • Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
  • Camera Serial Number
  • Camera Software Version
  • Processes (Daemons) currently running on the camera
  • FPGA info
  • fpga_sdram_phase
  • Cat_interupts

You can change the following network settings with the Control Panel

  • Camera IP address
  • Broadcast address
  • Netmask
  • Gateway

High Priority Upcoming Features

  • An 'advanced' section that refers some of the API calls for a more thorough call of status.
  • Ability to reboot camera from panel
  • Ability to start/stop/restart certain processes


TODO

  • Elphel support email and other contact information on the page
  • Verification of IP and other settings before they are set
  • A disclaimer
  • Fix Camera reboot function
  • Create restart network daemon function
  • Make all fields collapsible/re-collapsible
  • Create a copy-to-clipboard function for the camera summary
  • Create notification pages for the change network settings functions
  • Clean up some of the output information
  • Clean up visual styles in general

Suggestions

Any suggestions for features or additional camera information you would like to see should be listed here.


This is a part of Project α