Difference between revisions of "Development documentation"

From ElphelWiki
Jump to: navigation, search
Line 42: Line 42:
== Elphel cameras and Zoneminder ==
== Elphel cameras and Zoneminder ==
== [http://wiki.elphel.com/index.php?title=HD_cinema_camera_Development_FAQ  HD cinema camera] ==
== USB host interface ==
== USB host interface ==

Revision as of 10:15, 9 February 2007

Elphel Network Cameras Manual

353/363 | Using the cameras | Camera software | Live CD | Camera hardware | Diagnostic & repair | Development documentation | 333 prices | Information | FAQ | About Elphel, Inc


2 Developers:

We just started this Wiki so the info here is rather patchy covering just some particular topics. Please be sure more will be posted here by us - Elphel develpers and (I hope) by you too.

Happy hacking of Elphel products,




The photo finish camera can be used for many sporting applications: greyhound, horse, bike, car/motorbike and athletics. This discussion will be focused on athletics competitions since this is the most demanding. The photo finish camera system “yet to be named” should meet all the requirements of a Fully Automatic Timer (F.A.T.) as outlined in the IAAF, and other international athletic organizations. A handful of such systems are available and are out of the reach of many small struggling clubs and sporting bodies.

The photo finish camera is positioned at the finish line and takes continuous images of the line at a rate of 3072 frames per second and then displays them side by side on the screen. Since there are usually 8 lanes in the race the camera/software has to have some way of differentiating the lanes from the background. The simplest way is to paint the finish line with back squares where the lane line intersects the finish line for the software to detect the lanes and assign the athlete to the correct lane.


The photo finish images are composed of many assembled pictures of the finish line. Since the finish line is white and the lines that define the different lanes are also white it would be hard to differentiate the two. So the black squares would be seen as a continuous black line behind the athletes and would define the individual lanes.

The black squares on the finish line are also used for the camera alignment. The smaller the black squares the better the camera alignment.

Components of the photo finish system:

1. Camera – with high accuracy crystal IC- Timer (Elphel) and time stamping of images.

  - Remote controlled Pan tilt system or accurate XYZ table for camera alignment (software and joystick control)
  - Remote control zoom lens (software)
  - Scope or laser for alignment
  - Restart button/trigger (wireless???)

2. Start/stop/reset trigger (wireless and/or mechanical).

3. Software- dedicated meet management system (a database driven image capture/analysis system).


Zeroconf for Elphel cameras

Elphel cameras and Zoneminder

HD cinema camera

USB host interface

Motorized lens control

 - lens control board 10331
Lens control board.
 - power and communication board 10332
Power and communication board.

Work the camera with motorized lens.

Outdoor enclosure

Real Time Clock for the camera

There is a description of RTC implemented in the camera FPGA. This clock might be fine-tuned, the data is available for reading by the CPU and to be embedded in the camera images/video by the FPGA itself.

Free Software and Open Hardware. Elphel, Inc., 2005