Driverless mode 393

Description

Instructions on how to disable sensor driver and get images from image sensor (for MT9F002 sensor)

Instructions

pre

• to load bitstream for MT9F002 appropriate changes need to be made to:
  • device tree

set sensors to mt9f002 in elphel393-detect_sensors,sensors entry

• • /etc/elphel393/default_10389.xml for setup w/o 10389 or 10389's eeprom otherwise

write MT9F002 for application

• Disable driver

root@elphel393~# touch /etc/elphel393/disable_driver
# then reboot

init

• start python session:

root@elphel393~# cd /usr/local/verilog/; test_mcntrl.py @hargs-after

• init:

   setup_all_sensors True None 0x1 False 4384 3280

   write_sensor_i2c 0 1 0 0x31c08000 # hispi timing
   write_sensor_i2c 0 1 0 0x030600b4 # pll multiplier
   write_sensor_i2c 0 1 0 0x31c68400 # hispi control status
   write_sensor_i2c 0 1 0 0x306e9280 # datapath select
   write_sensor_i2c 0 1 0 0x301a001c # reset and start streaming

   hispi_phases_adjust 0

   write_sensor_i2c 0 1 0 0x301a001c # reset and start streaming

   setup_all_sensors True None 0x1 False 4384 3280
   compressor_control all None None None None None 2
   program_gamma all 0 0.57 0.04

   write_sensor_i2c 0 1 0 0x3028000a # global gain
   write_sensor_i2c 0 1 0 0x302c000d # some gain
   write_sensor_i2c 0 1 0 0x302e0010 # some gain
   write_sensor_i2c 0 1 0 0x30120080 # coarse exposure

   jpeg_acquire_write

   #write_sensor_i2c 0 1 0 0x301a0018 # put to standby

• inspect image:

http://192.168.0.9/img.jpeg