Elphel Camera Sandbox

From ElphelWiki
Revision as of 17:47, 16 December 2007 by Polto (talk | contribs)
Jump to: navigation, search
Elphel Camera Sandbox connection schema


This section describe how to use the Sandbox of Elphel 3xx Network Reconfigurable Cameras.

Please feel free to contribute and discuss on the proposed architecture.

Hardware

Our Sandbox is based on:

  • a router: Linksys WRT54GL 1.1 under OpenWrt GNU/Linux
  • a manageable POE switch: Linksys SRW208P
  • a server with at least one HD, x86 CPU 1 GB RAM, 1 network cards, DVDROM
  • different combinations of Elphel 3xx cameras connected to the POE switch

The server

The server will run a modified version of [ElphelSoftwareKit]

the distribution should be modified to allow:

  • to reserve an exclusive access to sandbox of a camera or of a LiveDVD distribution or both
  • control the POE switch (power up/down cameras, why not some statistics from the switch, like traffic, POE consumption, ...)
  • soft (reflash.php) and hard ("pressed" button and power up/down)
  • store/restore users/developers configs from cameras / LiveDVD on some server
  • reboot a LiveDVD session
  • bug report


Elphel Network Cameras

Different models or combinations of boards can be connected to the switch.

Actually one Elphel 353 camera is available: http://demo1.stvs.ch:3580

fpt and telnet are also available on port 3521 and 3523.