Difference between revisions of "Elphel camera parts"

From ElphelWiki
Jump to: navigation, search
(0353-30-02 - Flex cable holder for the HDD)
 
(204 intermediate revisions by 6 users not shown)
Line 1: Line 1:
== Camera Assemblies ==
+
[[Elphel_camera_parts_0393]] - other parts for NC393 series cameras
=== NC353L ===
+
== [[Elphel_camera_parts_0353 | Camera Assemblies]] ==
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353#NC353L | NC353L]] ===
|-
+
=== [[Elphel_camera_parts_0353#NC353L_with_10369A_and_two_CF_cards | NC353L with 10369A and two CF cards]] ===
| [[Image:NC353L-assy.jpeg|thumb|NC353L Camera Assembly]] ||
+
=== [[Elphel_camera_parts_0353#NC353L_with_10369A_and_1.8.22_HDD | NC353L with 10369A and 1.8" HDD]] ===
{| border="1" cellpadding="1"
+
=== [[Elphel_camera_parts_0353#ENC353 | ENC353]] ===
|-
+
=== [[Elphel_camera_parts_0353#MNC354-2 | MNC354-2]] ===
| part# || quantity
+
=== [[Elphel_camera_parts_0353#MNC354-13 | MNC354-13]] ===
|-
 
| 0353-00-01 ||          1
 
|-
 
| 0353-00-06 ||          1
 
|-
 
| 0353-01-01 ||          1
 
|-
 
| 0353-10-02 ||          1
 
|-
 
| 0353-11-01 ||          1
 
|-
 
| 0353-12-01 ||          1
 
|-
 
| 0353-13-02 ||          1
 
|-
 
| 0353-17-01 ||          1
 
|-
 
| 0353-17-03 ||          1
 
|-
 
| 0353-18-01 ||          1
 
|-
 
| 0353-18-05 ||          1
 
|-
 
| 0353-18-06 ||          1
 
|-
 
| 0353-20-01 ||          4
 
|-
 
| 0353-30-01 ||          2
 
|-
 
| 0353-70-01 ||          1
 
|-
 
| 0353-96-01 ||          4
 
|-
 
| 0353-97-01 ||          4
 
|-
 
| 0353-98-01 ||          11
 
|-
 
| 0353-98-02 ||          4
 
|-
 
| 0353-99-01 ||          4
 
|-
 
|}
 
|-
 
|}
 
  
=== NC353L with 10369A and two CF cards ===
+
----
{| border="0" cellpadding="2"
+
----
|-
+
== [[Elphel_camera_parts_0353-00 | 0353-00 PCB assemblies]] ==
| [[Image:10353-10369-assy.jpeg|thumb|NC353L with 10369A Camera Assembly]] [[Image:10353-10369-assy_blowup.jpeg|thumb|NC353L with 10369A Parts]] ||
+
===  [[Elphel_camera_parts_0353-00#0353-00-01_-_10353_rev_E_assembly | 0353-00-01  - 10353 rev E assembly]] ===
{| border="1" cellpadding="1"
+
===  [[Elphel_camera_parts_0353-00#0353-00-02_-_10369_rev_A_assembly | 0353-00-02  - 10369 rev A assembly]] ===
|-
+
===  [[Elphel_camera_parts_0353-00#0353-00-03_-_103693_rev_A_assembly | 0353-00-03  - 103693 rev A assembly]] ===
| part# || quantity
+
===  [[Elphel_camera_parts_0353-00#0353-00-04_-_103691_rev_A_assembly | 0353-00-04  - 103691 rev A assembly]] ===
|-
+
===  [[Elphel_camera_parts_0353-00#0353-00-06_-_10338_rev_A_assembly | 0353-00-06  - 10338 rev A assembly]] ===
| 0353-00-01 ||          1
+
====  [[Elphel_camera_parts_0353-00#0353-00-10_-_10318_rev_A_assembly_with_1.3_MPix_monochrome | 0353-00-10  - 10318 rev A assembly with 1.3 MPix monochrome ]] ====
|-
+
====  [[Elphel_camera_parts_0353-00#0353-00-11_-_10318_rev_A_assembly_with_1.3_MPix_color | 0353-00-11  - 10318 rev A assembly with 1.3 MPix color]] ====
| 0353-00-02 ||          1
+
====  [[Elphel_camera_parts_0353-00#0353-00-12_-_10318_rev_A_assembly_with_3_MPix_color | 0353-00-12  - 10318 rev A assembly with 3 MPix color]] ====
|-
+
====  [[Elphel_camera_parts_0353-00#0353-00-13_-_10338_rev_A_assembly_with_5_MPix_monochrome | 0353-00-13  - 10338 rev A assembly with 5 MPix monochrome]] ====
| 0353-00-03 ||          1
+
====  [[Elphel_camera_parts_0353-00#0353-00-14_-_10338_rev_A_assembly_with_5_MPix_color | 0353-00-14  - 10338 rev A assembly with 5 MPix color]] ====
|-
+
===  [[Elphel_camera_parts_0353-00#0353-00-07_-_103692_assembly | 0353-00-07  - 103692 assembly]] ===
| 0353-00-04 ||          1
+
===  [[Elphel_camera_parts_0353-00#0353-00-08_-_10359_rev_A_assembly | 0353-00-08  - 10359 rev A assembly]] ===
|-
+
===  [[Elphel_camera_parts_0353-00#0353-00-15_-_10338_rev_D_assembly_with_5MPix_Color_Sensor | 0353-00-15 - 10338 rev D assembly with 5 MPix Color Sensor]] ===
| 0353-00-06 ||          1
 
|-
 
| 0353-00-07 ||          1
 
|-
 
| 0353-01-01 ||          1
 
|-
 
| 0353-01-02 ||          1
 
|-
 
| 0353-02-01 ||          2
 
|-
 
| 0353-10-02 ||          1
 
|-
 
| 0353-11-02 ||          1
 
|-
 
| 0353-12-01 ||          1
 
|-
 
| 0353-13-02 ||          1
 
|-
 
| 0353-17-02 ||          1
 
|-
 
| 0353-17-03 ||          1
 
|-
 
| 0353-18-01 ||          1
 
|-
 
| 0353-18-02 ||          1
 
|-
 
| 0353-18-05 ||          1
 
|-
 
| 0353-18-06 ||          1
 
|-
 
| 0353-19-02 ||          1
 
|-
 
| 0353-20-01 ||          4
 
|-
 
| 0353-30-01 ||          2
 
|-
 
| 0353-70-01 ||          1
 
|-
 
| 0353-90-01 ||          4
 
|-
 
| 0353-96-01 ||          2
 
|-
 
| 0353-97-01 ||          4
 
|-
 
| 0353-98-01 ||          11
 
|-
 
| 0353-98-02 ||          4
 
|-
 
| 0353-99-02 ||          2
 
|-
 
| 0353-99-03 ||          2
 
|-
 
| 0353-99-04 ||          4
 
|-
 
|}
 
|-
 
|}
 
  
=== NC353L with 10369A and 1.8" HDD ===
+
=== [[Elphel_camera_parts_0353-00#0353-00-16_-_10338_rev_D_assembly_with_5MPix_Monochrome_Sensor | 0353-00-16 - 10338 rev D assembly with 5 MPix Monochrome Sensor]] ===
{| border="0" cellpadding="2"
 
|-
 
| [[Image:10353-10369-hdd-assy.jpeg|thumb|NC353L with 10369A and 1.8"HDD Camera Assembly]] ||
 
{| border="1" cellpadding="1"
 
|-
 
| part# || quantity
 
|-
 
| 0353-00-01 ||          1
 
|-
 
| 0353-00-02 ||          1
 
|-
 
| 0353-00-03 ||          1
 
|-
 
| 0353-00-04 ||          1
 
|-
 
| 0353-00-06 ||          1
 
|-
 
| 0353-00-07 ||          1
 
|-
 
| 0353-01-01 ||          1
 
|-
 
| 0353-01-02 ||          1
 
|-
 
| 0353-01-03 ||          1
 
|-
 
| 0353-02-02 ||          1
 
|-
 
| 0353-10-02 ||          1
 
|-
 
| 0353-11-03 ||          1
 
|-
 
| 0353-12-01 ||          1
 
|-
 
| 0353-13-02 ||          1
 
|-
 
| 0353-17-02 ||          1
 
|-
 
| 0353-17-03 ||          1
 
|-
 
| 0353-18-01 ||          1
 
|-
 
| 0353-18-02 ||          1
 
|-
 
| 0353-18-03 ||          1
 
|-
 
| 0353-18-04 ||          1
 
|-
 
| 0353-18-05 ||          1
 
|-
 
| 0353-18-06 ||          1
 
|-
 
| 0353-20-01 ||          4
 
|-
 
| 0353-30-01 ||          2
 
|-
 
| 0353-30-02 ||          1
 
|-
 
| 0353-70-01 ||          1
 
|-
 
| 0353-90-01 ||          4
 
|-
 
| 0353-96-01 ||          2
 
|-
 
| 0353-97-01 ||          4
 
|-
 
| 0353-98-01 ||          11
 
|-
 
| 0353-98-02 ||          4
 
|-
 
| 0353-98-03 ||          4
 
|-
 
| 0353-99-02 ||          4
 
|-
 
| 0353-99-04 ||          4
 
|-
 
|}
 
|-
 
|}
 
  
== 0353-00    - PCB assemblies ==
 
=== 0353-00-01  - 10353 rev E assembly ===
 
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-00-01.jpeg|thumb|[[Media:0353-00-01.stp.tar.gz|3d (step)]]  [[Media:0353-00-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-01.pdf|2d (pdf)]]]] || ''Notes:Some individual components are not shown in the model.''
 
|-
 
|}
 
  
=== 0353-00-02  - 10369 rev A assembly ===
+
----
{| border="0" cellpadding="2"
+
----
|-
 
| [[Image:0353-00-02.jpeg|thumb|[[Media:0353-00-02.stp.tar.gz|3d (step)]]  [[Media:0353-00-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-02.pdf|2d (pdf)]]]] || ''Notes:Some individual components are not shown in the model.''
 
|-
 
|}
 
=== 0353-00-03  - 103693 rev A assembly ===
 
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-00-03.jpeg|thumb|[[Media:0353-00-03.stp.tar.gz|3d (step)]]  [[Media:0353-00-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-03.pdf|2d (pdf)]]]] || ''Notes:Some individual components are not shown in the model.''
 
|-
 
|}
 
=== 0353-00-04  - 103691 rev A assembly ===
 
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-00-04.jpeg|thumb|[[Media:0353-00-04.stp.tar.gz|3d (step)]]  [[Media:0353-00-04.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-04.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
=== 0353-00-06 - 10338 rev A assembly ===
+
== [[Elphel_camera_parts_0353-01 | 0353-01 - cable assemblies]] ==
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-01#0353-01-01_-_flex_jumper.2C_30_conductors.2C_0.5mm_pitch.2C_l.3D30mm.2C_t.3D0.3mm_both_ends | 0353-01-01 - flex jumper, 30 conductors, 0.5mm pitch, l=30mm, t=0.3mm both ends ]] ===
|-
+
=== [[Elphel_camera_parts_0353-01#0353-01-02_-_flex_jumper.2C_10_conductors.2C_0.5mm_pitch.2C_l.3D76mm.2C_t.3D0.3mm_both_ends | 0353-01-02  - flex jumper, 10 conductors, 0.5mm pitch, l=76mm, t=0.3mm both ends ]] ===
| [[Image:0353-00-06.jpeg|thumb|[[Media:0353-00-06.stp.tar.gz|3d (step)]]  [[Media:0353-00-06.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-06.pdf|2d (pdf)]]]] || ''Notes:Some individual components are not shown in the model.''
+
=== [[Elphel_camera_parts_0353-01#0353-01-03_-_flex_jumper.2C_40_conductors.2C_0.5mm_pitch.2C_l.3D70mm_.28one_end_t.3D0.3mm.2C_other_end_t.3D0.2mm.29 | 0353-01-03  - flex jumper, 40 conductors, 0.5mm pitch, l=70mm (one end t=0.3mm, other end t=0.2mm) ]] ===
|-
+
=== [[Elphel_camera_parts_0353-01#0353-01-04_-_RJ45.2FDB9F_Modular_Adapter.2C_wired | 0353-01-04  - RJ45/DB9F Modular Adapter, wired  ]] ===
|}
+
=== [[Elphel_camera_parts_0353-01#0353-01-05_-_6P6C_crossed_modular_cable | 0353-01-05  - 6P6C crossed modular cable ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-06_-_POE_Power_Injector_Cable_for_custom_12v-36v_applications. | 0353-01-06 - Power Injector Cable for custom 12v-36v applications. ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-07_-_POE_Power_Injector_Cable_-_6_ft._for_PoE_power_supply_-_American |0353-01-07  - Power Injector Cable - 6 ft. for power supply - American ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-08_-_POE_Power_Injector_Cable_-_6_ft._for_PoE_power_supply_-_European | 0353-01-08  - Power Injector Cable - 6 ft. for 48V power supply - European ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-10_-_Connector_Molex.2C_Microfit_3.0.2C_4_pins.2C_p.2Fn_43645-0400 | 0353-01-10  -  Connector Molex, Microfit 3.0, 4 pins, p/n 43645-0400 ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-11_-_Connector.2C_Norcom_D-sub_26_pins.2C_p.2Fn_180-026-203 | 0353-01-11  - Connector, Norcom D-sub 26 pins, p/n 180-026-203  ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-20_-_flex_jumper.2C_30_conductors.2C_0.5mm_pitch.2C_l.3D2.22_.2850.8mm.29.2C_t.3D0.3mm_both_ends | 0353-01-20  - flex jumper, 30 conductors, 0.5mm pitch, l=2" (50.8mm), t=0.3mm both ends ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-21_-_flex_jumper.2C_30_conductors.2C_0.5mm_pitch.2C_l.3D4.22_.28101.6mm.29.2C_t.3D0.3mm_both_ends | 0353-01-21  - flex jumper, 30 conductors, 0.5mm pitch, l=4" (101.6mm), t=0.3mm both ends ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-22_-_flex_jumper.2C_30_conductors.2C_0.5mm_pitch.2C_l.3D6.22_.28152.4mm.29.2C_t.3D0.3mm_both_ends | 0353-01-22  - flex jumper, 30 conductors, 0.5mm pitch, l=6" (152.4mm), t=0.3mm both ends ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-23_-_flex_jumper.2C_30_conductors.2C_0.5mm_pitch.2C_l.3D8.22_.28203.2mm.29.2C_t.3D0.3mm_both_ends | 0353-01-23  - flex jumper, 30 conductors, 0.5mm pitch, l=8" (203.2mm), t=0.3mm both ends ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-25_-_flex_jumper.2C_4_conductors.2C_0.5mm_pitch.2C_l.3D2.22_.2850.8mm.29.2C_t.3D0.3mm_both_ends | 0353-01-25  - flex jumper, 4 conductors, 0.5mm pitch, l=2" (50.8mm), t=0.3mm both ends ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-40_-_RJFTV21N_-_sealed_8p8n_connector | 0353-01-40 - RJFTV21N - sealed 8p8n connector ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-41_-_USBFTV21N_-_sealed_USB_connector | 0353-01-41 - USBFTV21N - sealed USB connector ]] ===
 +
=== [[Elphel_camera_parts_0353-01#0353-01-42_-_Sealed_3-pin_connector_p.2Fn_D38999-20JA98SN | 0353-01-42 - Sealed 3-pin connector p/n D38999-20JA98SN ]] ===
  
=== 0353-00-07  - 103692 assembly ===
+
=== [[Elphel_camera_parts_0353-01#0353-01-50_-_FPC flexible printed circuit 90 degree for panoramic head | 0353-01-50 - FPC flexible printed circuit 90 degree for panoramic head ]] ===
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-01#0353-01-51_-_FPC flexible printed circuit straight for panoramic head | 0353-01-51 - FPC flexible printed circuit straight for panoramic head ]] ===
|-
 
| [[Image:0353-00-07.jpeg|thumb|[[Media:0353-00-07.stp.tar.gz|3d (step)]]  [[Media:0353-00-07.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-07.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
=== 0353-00-08  - 10359 rev A assembly ===
+
----
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-00-08.jpeg|thumb|[[Media:0353-00-08.stp.tar.gz|3d (step)]]  [[Media:0353-00-08.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-08.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
== 0353-01 - cable assemblies ==
+
== [[Elphel_camera_parts_0353-02  | 0353-02 - Storage options & other electronic assemblies ]] ==
=== 0353-01-01 - flex jumper, 30 conductors, 0.5mm pitch, l=30mm, t=0.3mm both ends ===
+
=== [[Elphel_camera_parts_0353-02#0353-02-01_-_CF_card:_4GB_Compact_Flash_-_SanDisk_SDCFX3-004G | 0353-02-01 - CF card: 4GB Compact Flash - SanDisk SDCFX3-004G ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-02_-_1.8.22_HDD:_Toshiba_MK8009GAH_.28HDD1764.29_80GB.2C_ATA.2C_ZIF.2FLIF_Connector | 0353-02-02 - 1.8" HDD:  Toshiba MK8009GAH (HDD1764) 80GB, ATA, ZIF/LIF Connector ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-03_-_2.5.22_HDD | 0353-02-03  - 2.5" HDD ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-04_-_Power_Supply:_12v.2C_1.5A.2C_AC.2FDC_Power_Adapter.2C_International_AC_Multi-plug_.28Digi-Key_p.2Fn_T380-P5P-ND.29 | 0353-02-04  - Power Supply: 12v, 1.5A, AC/DC Power Adapter, International AC Multi-plug]] ===
  
=== 0353-01-02 - flex jumper, 10 conductors, 0.5mm pitch, l=76mm, t=0.3mm both ends ===
+
=== [[Elphel_camera_parts_0353-02#0353-02-05_-_Capal_F16EA-03LLC_DC_Fan.2C_3VDC.2C_0.07W | 0353-02-05 - Capal F16EA-03LLC DC Fan, 3VDC, 0.07W ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-06_-_Fan_Sunon_KDE0504PFV2.11.MS.A.GN.2C_5VDC.2C_0.7W | 0353-02-06 - Fan Sunon KDE0504PFV2.11.MS.A.GN, 5VDC, 0.7W ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-08_-_Fan_Copal.2C_5VDC.2C_0.25W_F310R-05LLC | 0353-02-08 - Fan Copal, 5VDC, 0.25W F310R-05LLC ]] ===
  
=== 0353-01-03  - flex jumper, 40 conductors, 0.5mm pitch, l=70mm (one end t=0.3mm, other end t=0.2mm) ===
+
=== [[Elphel_camera_parts_0353-02#0353-02-09_-_3 22 1 TB_HDD | 0353-02-09 - 3" 1 TB HDD ]] ===
  
=== 0353-01-04 - RJ45/DB9F Modular Adapter, wired ===
+
=== [[Elphel_camera_parts_0353-02#0353-02-10_-_PoE_Power_Supply:_Midspan_power_supply | 0353-02-10  - 48V Ethernet cable Power Supply: Midspan power supply ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-11_-_PoE_Power_Supply:_Midspan_power_supply_PW182RB4800F01 | 0353-02-11  - 48V Ethernet cable Power Supply: Midspan power supply PW182RB4800F01 ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-20_-_USB_to_Serial_Converter | 0353-02-20 - USB to Serial Converter ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-21_-_SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable | 0353-02-21 - SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable ]] ===
  
(Supplier: Cables to Go - Part#: 02941,  http://www.cablestogo.com/product.asp?cat_id=107&sku=02941)
+
=== [[Elphel_camera_parts_0353-02#0353-02-30_-_Ocean_Server_OS5000-US_Digital_compass_.28inside_the_camera.29 | 0353-02-30 - Ocean Server OS5000-US Digital compass (inside the camera) ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-31_-_Garmin_GPS_18_USB_GPS_receiver_.28external.29 | 0353-02-31 - Garmin GPS 18 USB GPS receiver (external)]] ===
  
The wiring procedure is described on the [[RJ45/DB9F_Modular_Adapter]] page.
+
=== [[Elphel_camera_parts_0353-02#0353-02-32_-_EEE-SDK_-_ASUS_Eee_Box_EBXB202_model_preinstalled_with_Kubuntu_9.10_and_Elphel_complete_SDK. | 0353-02-32 - EEE-SDK]] ===
  
=== 0353-01-05  - 6P6C crossed modular cable ===
+
=== [[Elphel_camera_parts_0353-02#0353-02-41_-_AC.2FDC_converter | 0353-02-41 - AC/DC converter ]] ===
  
=== 0353-01-06  - POE Power Injector Cable for custom 12v-36v applications. ===
+
=== [[Elphel_camera_parts_0353-02#0353-02-51_-_GigE_5-port_switch | 0353-02-51 - GigE 5-port switch ]] ===
 +
=== [[Elphel_camera_parts_0353-02#0353-02-52_-_Enclosure_for_4x2.5.22_HDD | 0353-02-52 - Enclosure for 4x2.5" HDD ]] ===
  
(Supplier: WISP-router, Inc. - Part#: EZPOEPA02,  http://store.wisp-router.com/itemdesc.asp?Tp=&eq=&ic=EZPOEPA02)
+
----
  
== 0353-02 - Storage options & other electronic assemblies ==
+
== [[Elphel_camera_parts_0353-03  | 0353-03 - PCB boards ]] ==
Standard / in stock assemblies. Other options available upon request.
+
=== [[Elphel_camera_parts_0353-03#0353-03-01_-_10353_rev_E_Camera_Processor_PCB_board | 0353-03-01  - 10353 rev E Camera Processor PCB board ]] ===
=== 0353-02-01 - CF card: 4GB Compact Flash - SanDisk SDCFX3-004G ===
+
=== [[Elphel_camera_parts_0353-03#0353-03-02_-_10369_rev_A_Camera_Interface_PCB_board | 0353-03-02 - 10369 rev A Camera Interface PCB board ]] ===
 +
=== [[Elphel_camera_parts_0353-03#0353-03-03_-_103693_rev_A_USB_connector_PCB_board | 0353-03-03 - 103693 rev A USB connector PCB board ]] ===
 +
=== [[Elphel_camera_parts_0353-03#0353-03-04_-_103691_rev_A_CF_card_connector_PCB_board | 0353-03-04 - 103691 rev A CF card connector PCB board ]] ===
 +
=== [[Elphel_camera_parts_0353-03#0353-03-06_-_10338_rev_A_Sensor_PCB_board | 0353-03-06  - 10338 rev A Sensor PCB board ]] ===
 +
=== [[Elphel_camera_parts_0353-03#0353-03-07_-_103692_rev_A_PCB_board_for_HDD | 0353-03-07  - 103692 rev A PCB board for HDD ]] ===
 +
=== [[Elphel_camera_parts_0353-03#0353-03-08_-_10359_Multifunction_Multiplexor_PCB_board | 0353-03-08  - 10359 Multifunction Multiplexor PCB board ]] ===
  
=== 0353-02-02  - 1.8" HDD:  Toshiba MK8009GAH (HDD1764) 80GB, ATA, ZIF/LIF Connector ===
+
=== [[Elphel_camera_parts_0353-03#0353-03-09_-_10338_rev_D_Image_Sensor_PCB_board | 0353-03-09 - 10338 rev D Image Sensor PCB board ]] ===
  
=== 0353-02-03 - 2.5" HDD ===
+
=== [[Elphel_camera_parts_0353-03#0353-03-10_-_10364 Motor Driver PCB board | 0353-03-10 - 10364 Motor Driver PCB board ]] ===
  
=== 0353-02-04  - Power Supply: 12v, 1.5A, AC/DC Power Adapter, International AC Multi-plug (Digi-Key p/n T380-P5P-ND) === Manufacturer: CUI Inc. p/n EMS060300-P5P-SZ (DC Plug Type: Female, 2.1mm I.D. x 5.5mm O.D. x 12mm)
+
 
 +
----
 +
----
 +
 
 +
==  [[Elphel_camera_parts_0353-04  | 0353-04 - Components for PCB Assembly ]] ==
 +
=== [[Elphel_camera_parts_0353-04#0353-04-13_-_5_MPix_Monochrome_Sensor |0353-04-13 - 5 MPix Monochrome Sensor  ]] ===
 +
=== [[Elphel_camera_parts_0353-04#0353-04-14_-_5_MPix_Color_Sensor |0353-04-14 - 5 MPix Color Sensor ]] ===
 +
 
 +
=== [[Elphel_camera_parts_0353-04#0353-04-20 - Traco 12 Volt power |0353-04-20 - Traco 12 Volt power in 9-36V out 3.3V / 3500 mA  ]] ===
 +
 
 +
----
 +
----
 +
 
 +
==  [[Elphel_camera_parts_0353-07 | 0353-07 Camera subassemblies ]] ==
 +
=== [[Elphel_camera_parts_0353-07#0353-07-01_Sensor_Front_End_.2B_10338_.2B_5Mp_Color_Sensor_.2B_IR_cut_Filter_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-01 Sensor Front End ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-02_Sensor_Front_End_.2B_10338_.2B_5Mp_Mono_Sensor_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-02 Sensor Front End ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-03_Sensor_Front_End_.2B_10338_.2B_5Mp_Color_Sensor_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-03 Sensor Front End ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-04_Sensor_Front_End_.2B_10338_.2B_5Mp_Mono_Sensor_.2B_IR_cut_Filter_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-04 Sensor Front End]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-05_Sensor_Front_End_.28round.29_.2B_10338_.2B_5Mp_Color_Sensor_.2B_IR_cut_Filter_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-05 Sensor Front End]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-06_Sensor_Front_End_.28round.29_.2B_10338_.2B_5Mp_Mono_Sensor_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-06 Sensor Front End ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-07_Sensor_Front_End_.28round.29_.2B_10338_.2B_5Mp_Color_Sensor_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-07 Sensor Front End]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-08_Sensor_Front_End_.28round.29_.2B_10338_.2B_5Mp_Mono_Sensor_.2B_IR_cut_Filter_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-08 Sensor Front End]] ===
 +
 
 +
=== [[Elphel_camera_parts_0353-07#0353-07-11_Sensor_Front_End_.2B_10338_revD_.2B_5Mp_Color_Sensor_.2B_IR_cut_Filter_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-11 Sensor Front End + 10338 revD + 5Mp Color Sensor + IR cut Filter + Adapter Ring + Cap + 4 screws ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-21_Sensor_Front_End_.2B_10338_rev_A_.2B_5Mp_Color_Sensor_.2B_IR_cut_Filter_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-21 Sensor Front End + 10338 rev A + 5Mp Color Sensor + IR cut Filter + Adapter Ring + Cap + 4 screws ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-12_Sensor_Front_End_.2B_10338_rev_D_.2B_5Mp_Mono_Sensor_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-12 Sensor Front End + 10338 rev D + 5Mp Mono Sensor + Adapter Ring + Cap + 4 screws ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-22_Sensor_Front_End_.2B_10338_rev_A_.2B_5Mp_Mono_Sensor_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-22 Sensor Front End + 10338 rev A + 5Mp Mono Sensor + Adapter Ring + Cap + 4 screws ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-13_Sensor_Front_End_.2B_10338_rev_D_.2B_5Mp_Color_Sensor_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-13 Sensor Front End + 10338 rev D + 5Mp Color Sensor + Adapter Ring + Cap + 4 screws ]] ===
 +
=== [[Elphel_camera_parts_0353-07#0353-07-14_Sensor_Front_End_.2B_10338_rev_D_.2B_5Mp_Mono_Sensor_.2B_IR_cut_Filter_.2B_Adapter_Ring_.2B_Cap_.2B_4_screws | 0353-07-14 Sensor Front End + 10338 rev D + 5Mp Mono Sensor + IR cut Filter + Adapter Ring + Cap + 4 screws ]] ===
 +
 
 +
 
 +
 
 +
----
 +
----
 +
== [[Elphel_camera_parts_0353-08 | 0353-08 NC353 Camera assemblies ]] ==
 +
 
 +
 
 +
----
 +
----
 +
 
 +
== [[Elphel_camera_parts_0353-09 | 0353-09 NC363 Camera assemblies ]] ==
 +
 
 +
 
 +
----
 +
----
  
 
== Major camera enclosure parts ==
 
== Major camera enclosure parts ==
=== 0353-10 - bottoms ===
+
=== [[Elphel_camera_parts_0353-10 | 0353-10 - bottoms ]] ===
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
+
==== [[Elphel_camera_parts_0353-10#0353-10-01_-_Camera_Bottom.2C_l.3D104.77mm | 0353-10-01 - Camera Bottom, l=104.77mm ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-02_-_Camera_Bottom.2C_l.3D104.77mm | 0353-10-02 - Camera Bottom, l=104.77mm ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-03_-_Tube_Body_for_the_Sealed_Camera.2C_OD.3D61mm.2C_ID.3D58mm.2Cl.3D200mm.2C_Aluminum | 0353-10-03 - Tube Body for the Sealed Camera, OD=61mm, ID=58mm,l=200mm, Aluminum ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-04_-_Multicam-13_Camera_Body.2C_Aluminum.2C_Black_Anodize | 0353-10-04 - Multicam-13 Camera Body, Aluminum, Black Anodize ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-05_-_Multicam-13_Head_Body.2C_Aluminum.2C_Black_Anodize | 0353-10-05 - Multicam-13 Head Body, Aluminum, Black Anodize ]] ====
 +
 
 +
==== [[Elphel_camera_parts_0353-10#0353-10-06_-_SFE_Adapter_Bottom_for_Opposite_Sensors | 0353-10-06 - SFE Adapter Bottom for Opposite Sensors ]] ====
 +
 
 +
==== [[Elphel_camera_parts_0353-10#0353-10-10_-_stereo_crossbar.2C_stereo_base.3D248.5mm.2C_l.3D300mm | 0353-10-10 - stereo crossbar, stereo base=248.5mm, l=300mm ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-11_-_stereo_crossbar.2C_stereo_base.3D248.5mm.2C_l.3D300mm | 0353-10-11 - stereo crossbar, stereo base=248.5mm, l=300mm ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-12_-_Pano_Head_Bottom_Plate | 0353-10-12 - Pano Head Bottom Plate  ]] ====
 +
 
 +
==== [[Elphel_camera_parts_0353-10#0353-10-13_-_Body_3_Channel | 0353-10-13 - Body 3 Channel ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-14_-_Tube_Mount | 0353-10-14 - Tube Mount ]] ====
 +
 
 +
==== [[Elphel_camera_parts_0353-10#0353-10-15_-_Support_Pipe | 0353-10-15 - Support Pipe ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-16_-_Middle_flange_top | 0353-10-16 - Middle flange top ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-17_-_Tube_body | 0353-10-17 - Tube body ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-18_-_Middle_flange_bottom | 0353-10-18 - Middle flange bottom ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-19_-_Tube_Mount | 0353-10-19 - Tube Mount ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-21_-_Switchbox_enclosure_bottom | 0353-10-21 - Switchbox enclosure bottom ]] ====
 +
==== [[Elphel_camera_parts_0353-10#0353-10-22_-_Support_tube | 0353-10-22 - Support tube ]] ====
 +
 
 +
----
 +
----
 +
 
 +
===  [[Elphel_camera_parts_0353-11 | 0353-11 - tops ]] ===
 +
==== [[Elphel_camera_parts_0353-11#0353-11-01_-_camera_top_plain_.28no_connector_holes.29.2C_l.3D104.77mm | 0353-11-01 - camera top plain (no connector holes), l=104.77mm ]] ====
 +
==== [[Elphel_camera_parts_0353-11#0353-11-02_-_camera_top_with_connector_holes_for_the_10369_.28serial_port.2C_optoisolated_I.2FO.29.2C_l.3D104.77mm | 0353-11-02 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), l=104.77mm ]] ====
 +
==== [[Elphel_camera_parts_0353-11#0353-11-03_-_camera_top_with_connector_holes_for_the_10369_.28serial_port.2C_optoisolated_I.2FO.29.2C_and_1.8.22_HDD.2C_l.3D104.77mm | 0353-11-03 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), and 1.8" HDD,  l=104.77mm ]] ====
 +
 
 +
==== [[Elphel_camera_parts_0353-11#0353-11-06_-_SFE_Adapter_Top_for_Opposite_Sensors | 0353-11-06 - SFE Adapter Top for Opposite Sensors ]] ====
 +
 
 +
==== [[Elphel_camera_parts_0353-11#0353-11-10_-_stereo_crossbar_cover.2C_l.3D300mm | 0353-11-10 - stereo crossbar cover, l=300mm ]] ====
 +
==== [[Elphel_camera_parts_0353-11#0353-11-12_-_Switchbox_enclosure_lid | 0353-11-12 - Switchbox enclosure lid  ]] ====
 +
 
 +
----
 +
----
 +
 
 +
===  [[Elphel_camera_parts_0353-12 | 0353-12 - front ends ]] ===
 +
==== [[Elphel_camera_parts_0353-12#0353-12-01_-_Sensor_front_end_for_10318.2F10338_boards | 0353-12-01 - Sensor front end for 10318/10338 boards ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-02_-_Sensor_front_end_for_the_sealed_camera | 0353-12-02 - Sensor front end for the sealed camera ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-03_-_Sensor_front_end_for_10318.2F10338_boards_.28old.2C_round_inside.29 | 0353-12-03 - Sensor front end for 10318/10338 boards (old, round inside) ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-10_-_Stereo_crossbar_mount | 0353-12-10 - Stereo crossbar mount ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-11_-_Elbow_45_deg._for_the_sensor_front_end | 0353-12-11 - Elbow 45 deg. for the sensor front end ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-12_-_Front_end_plug | 0353-12-12 - Front end plug ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-13_-_Stereo_crossbar_end_cap | 0353-12-13 - Stereo crossbar end cap ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-14_-_Elbow_90_deg._for_the_sensor_front_end | 0353-12-14 - Elbow 90 deg. for the sensor front end  ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-21_-_Middle_Plate_for_Multicam-13.2C_Aluminum.2C_Black_Anodize | 0353-12-21  - Middle Plate for Multicam-13]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-22_-_Top_Panel_for_Multicam-13_w.2Fo_Ssupport_Holes.2C_Aluminum.2C_Black_Anodize | 0353-12-22  - Top Panel for Multicam-13 w/o Support Holes ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-23_-_Top_Panel_for_Multicam-13_with_Support_Holes.2C_Aluminum.2C_Black_Anodize | 0353-12-23  - Top Panel for Multicam-13 with Support Holes ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-29_-_Sensor_Front_End.2C_CS-mount | 0353-12-29 - Sensor Front End, CS-mount ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-30_-_Sensor_Adjustment_Plate | 0353-12-30 - Sensor Adjustment Plate ]] ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-36_-_Protection_head_body  | 0353-12-36 - Protection head body ]]  ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-37_-_Top_cover | 0353-12-37 - Top cover ]]  ====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-38_-_Lens_shade | 0353-12-38 - Lens shade ]]  ====
 +
===== [[Elphel_camera_parts_0353-12#0353-12-3801_-_Shade_top_flange | 0353-12-3801 - Shade top flange ]]  =====
 +
===== [[Elphel_camera_parts_0353-12#0353-12-3802_-_Shade_outer_shell | 0353-12-3802 - Shade outer shell ]]  =====
 +
===== [[Elphel_camera_parts_0353-12#0353-12-3803_-_Shede_bottom_flange | 0353-12-3803 - Shade bottom flange ]]  =====
 +
===== [[Elphel_camera_parts_0353-12#0353-12-3804_-_Shade_fin | 0353-12-3804 - Shade fin ]]  =====
 +
==== [[Elphel_camera_parts_0353-12#0353-12-39_-_Top_shade | 0353-12-39 - Top shade ]]  ====
 +
----
 +
 
 +
===  [[Elphel_camera_parts_0353-13 | 0353-13 - back panels ]] ===
 +
==== [[Elphel_camera_parts_0353-13#0353-13-01_-_Back_Panel.2C_only_network_.28RJ45.29_connector | 0353-13-01  - Back Panel, only network (RJ45) connector ]] ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-02_-_Back_Panel.2C_with_holes_for_network.2C_SATA_and_USB_connectors | 0353-13-02  - Back Panel, with holes for network, SATA and USB connectors ]] ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-03_-_Back_Panel.2C_Sealed.2C_Aluminum.2C_Black_Anodize | 0353-13-03  - Back Panel, Sealed, Aluminum, Black Anodize ]] ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-10_-_Back_Panel_for_Multicam-13.2C_Aluminum.2C_Black_Anodize | 0353-13-10  - Back Panel for Multicam-13, Aluminum, Black Anodize ]] ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-11_-_Back_Panel_for_Multicam-13.2C_Aluminum.2C_Black_Anodize | 0353-13-11  - Back Panel for Multicam-13, Aluminum, Black Anodize]]  ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-12_-_Connector_Panel | 0353-13-12  - Connector Panel ]]  ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-13_-_Fan_Mounting_Plate | 0353-13-13  - Fan Mounting Plate ]] ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-14_-_Connector_Panel | 0353-13-14 - Connector Panel ]] ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-15_-_Manifold | 0353-13-15 - Manifold ]] ====
 +
==== [[Elphel_camera_parts_0353-13#0353-13-16_-_Manifold_cover | 0353-13-16 - Manifold cover ]] ====
 +
 
 +
----
 +
----
 +
 
 +
==  [[Elphel_camera_parts_0353-17 | 0353-17 - decals/overlays ]] ==
 +
=== [[Elphel_camera_parts_0353-17#0353-17-01_-_back_panel_overlay.2C_network_only | 0353-17-01 - back panel overlay, network only ]] ===
 +
=== [[Elphel_camera_parts_0353-17#0353-17-02_-_back_panel_overlay_for_10369A_.28RJ45.2C_SATA.2C_USB.29 | 0353-17-02 - back panel overlay for 10369A (RJ45, SATA, USB) ]] ===
 +
=== [[Elphel_camera_parts_0353-17#0353-17-03_-_bottom_overlay | 0353-17-03 - bottom overlay ]] ===
 +
 
 +
----
 +
=== [[Elphel_camera_parts_0353-17#0353-17-04_-_Camera_Case_overlay_-_small | 0353-17-04 - Camera Case overlay - small ]] ===
 +
 
 +
----
 +
 
 +
=== [[Elphel_camera_parts_0353-17#0353-17-05_-_Camera_Case_overlay_-_large | 0353-17-05 - Camera Case overlay - large ]] ===
 +
 
 +
----
 +
----
 +
 
 +
==  [[Elphel_camera_parts_0353-18 | 0353-18    - parts external other ]] ==
 +
=== [[Elphel_camera_parts_0353-18#0353-18-01_-_tripod_mount.2C_1.2F4-20_thread | 0353-18-01  - tripod mount, 1/4-20 thread ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-02_-_connector_cover | 0353-18-02  - connector cover ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-03_-_Enclosure_for_the_1.8.22_HDD.2C_bottom | 0353-18-03  - Enclosure for the 1.8" HDD, bottom ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-04_-_Enclosure_for_the_1.8.22_HDD.2C_top | 0353-18-04  - Enclosure for the 1.8" HDD, top ]] ===
 +
=== [[Elphel_camera_parts_0353-18# 0353-18-05_-_5mm_C_mount_adapter_ring| 0353-18-05  - 5mm C mount adapter ring ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-06_-_C_mount_cap | 0353-18-06  - C mount cap ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-07_-_Stereo_crossbar_door_cover | 0353-18-07  - Stereo crossbar door cover ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-08_-_Tripod_Mount.2C_Inner.2C_Aluminum | 0353-18-08  - Tripod Mount, Inner ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-09_-_Tripod_Mount.2C_Outer.2C_Aluminum.2C_Black_Anodize | 0353-18-09  - Tripod Mount, Outer ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-10_-_Mount_Band.2C_Aluminum.2C_Black_Anodize | 0353-18-10  - Mount Band ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-11_-_Fisheye_Lens_Side_Cover.2C_Aluminum.2C_Black_Anodize | 0353-18-11  - Fisheye Lens Side Cover ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-12_-_Plug.2C_Black_Plastic | 0353-18-12  - Plug, Black Plastic ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-13_-_Plate.2C_Holding | 0353-18-13  - Plate, Holding ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-14_-_Half_flange | 0353-18-14 - Half flange ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-15_-_Switchbox_bracket | 0353-18-15 - Switchbox bracket ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-18_-_Latch_base | 0353-18-18 - Latch base ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-19_-_Latch_lever | 0353-18-19 - Latch lever ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-20_-_Latch_arm | 0353-18-20 - Latch arm ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-21_-_Hinge.2C_lid_part | 0353-18-21 - Hinge, lid part ]] ===
 +
=== [[Elphel_camera_parts_0353-18#0353-18-22_-_Hinge.2C_bottom_part | 0353-18-22 - Hinge, bottom part ]] ===
 +
 
 +
----
 +
----
 +
 
 +
==  [[Elphel_camera_parts_0353-19 | 0353-19    - parts internal other ]] ==
 +
=== [[Elphel_camera_parts_0353-19#0353-19-01_-_CF_support | 0353-19-01  - CF support ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-02_-_CF_support | 0353-19-02  - CF support ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-03_-_OS5000_support | 0353-19-03  - OS5000 support ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-04_-_PCB_Support.2C_Aluminum | 0353-19-04  - PCB Support, Aluminum ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-05_-_Fan_Adapter.2C_Aluminum | 0353-19-05  - Fan Adapter, Aluminum ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-06_-_Support_Rod.2C_Aluminum | 0353-19-06  - Support Rod, Aluminum ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-07_-_Fan_Duct.2C_Aluminum | 0353-19-07  - Fan Duct, Aluminum ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-08_-_Ring.2C_Cut.2C_Aluminum | 0353-19-08  - Ring, Cut, Aluminum ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-10_-_RJF22B00_Connector_shell | 0353-19-10  - RJF22B00 Connector shell ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-11_-_Window_Ring.2C_Inner.2C_Aluminum.2C_Black_Anodize | 0353-19-11  - Window Ring, Inner ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-12_-_Window_Ring.2C_Outer.2C_Aluminum.2C_Black_Anodize | 0353-19-12  - Window Ring, Outer ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-13_-_PCB_Mount.2C_Aluminum | 0353-19-13  - PCB Mount ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-14_-_Center_Camera_Mount_Plate.2C_Aluminum | 0353-19-14  - Center Camera Mount Plate ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-16_-_Support_Rod.2C_Aluminum.2C_Black_Anodize | 0353-19-16  - Support Rod ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-16_-_Support_Rod.2C_Aluminum.2C_Black_Anodize | 0353-19-17  - Multi-camera PCB Mount ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-21_-_Pano_Head_Internal_Body | 0353-19-21  - Pano Head Internal Body ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-22_-_Pano_Head_Internal_Body.2C_Top | 0353-19-22  - Pano Head Internal Body, Top ]] ===
 +
 
 +
=== [[Elphel_camera_parts_0353-19#0353-19-23_-_Duct | 0353-19-23 - Duct ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-23_-_Air_Duct | 0353-19-23 - Air Duct ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-24_-_Sensor_Focus.2FTilt_Adjustment_Module.2C_Base | 0353-19-24 - Sensor Focus/Tilt Adjustment Module, Base ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-25_-_Sensor_Focus.2FTilt_Adjustment_Module.2C_Arms | 0353-19-25 - Sensor Focus/Tilt Adjustment Module, Arms ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-26_-_Focus.2FTilt_Adjustment_Arm | 0353-19-26 - Focus/Tilt Adjustment Arm ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-27_-_Pano_Head_Internal_Body | 0353-19-27 - Pano Head Internal Body ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-28_-_Pano_Head_Internal_Body.2C_Top | 0353-19-28 - Pano Head Internal Body, Top ]] ===
 +
 
  
==== 0353-10-01 - camera bottom, l=104.77mm ====
+
=== [[Elphel_camera_parts_0353-19#0353-19-31_-_Rail.2C_left | 0353-19-31 - Rail, left ]] ===
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-19#0353-19-32_-_Rail.2C_right | 0353-19-32 - Rail, right ]] ===
|-
+
=== [[Elphel_camera_parts_0353-19#0353-19-33_-_Bracket_for_HDD_rails | 0353-19-33 - Bracket for HDD rails ]] ===
| [[Image:0353-10-01.jpeg|thumb|[[Media:0353-10-01.stp.tar.gz|3d (step)]]  [[Media:0353-10-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-10-01.pdf|2d (pdf)]]]] ||
+
=== [[Elphel_camera_parts_0353-19#http://wiki.elphel.com/i0353-19-34_-_Bracket.2C_limiting | 0353-19-34 - Bracket, limiting ]] ===
|-
+
=== [[Elphel_camera_parts_0353-19#0353-19-35_-_Bracket.2C_switch | 0353-19-35 - Bracket, switch ]] ===
|}
+
=== [[Elphel_camera_parts_0353-19#0353-19-36_-_Insert.2C_hinge_mount | 0353-19-36 - Insert, hinge mount ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-37_-_Insert.2C_Latch_mount | 0353-19-37 - Insert, Latch mount ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-38_-_Spacer | 0353-19-38 - Spacer ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-39_-_Spacer | 0353-19-39 - Spacer ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-40_-_Plate.2C_mounting | 0353-19-40 - Plate, mounting ]] ===
 +
=== [[Elphel_camera_parts_0353-19#0353-19-41_-_Coupler | 0353-19-41 - Coupler ]] ===
  
==== 0353-10-02 - camera bottom, l=104.77mm ====
+
----
(tripod mount moved forward)
+
=== [[Elphel_camera_parts_0353-19#0353-19-42_-_SFE Module, Base | 0353-19-42 - SFE Module, Base ]] ===
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-10-02.jpeg|thumb|[[Media:0353-10-02.stp.tar.gz|3d (step)]]  [[Media:0353-10-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-10-02.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
==== 0353-10-10 - stereo crossbar, stereo base=248.5mm, l=300mm ====
+
----
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-10-10.jpeg|thumb|[[Media:0353-10-10.stp.tar.gz|3d (step)]]  [[Media:0353-10-10.dxf.tar.gz|2d (dxf)]]  [[Media:0353-10-10.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
=== 0353-11 - tops ===
+
== [[Elphel_camera_parts_0353-20 | 0353-20 - custom mounting parts ]] ==
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
+
=== [[Elphel_camera_parts_0353-20#0353-20-01_-_standoff.2C_M2.2FM2.5.2C_14.5mm_high.2C_DIA_4.5mm | 0353-20-01 - standoff, M2/M2.5, 14.5mm high, DIA 4.5mm ]] ===
 +
=== [[Elphel_camera_parts_0353-20#0353-20-02_-_Spacer.2C_OD.3D5mm.2C_ID.3D2.7mm.2C_l.3D15mm | 0353-20-02 - Spacer, OD=5mm, ID=2.7mm, l=15mm  ]] ===
  
==== 0353-11-01 - camera top plain (no connector holes), l=104.77mm ====
+
=== [[Elphel_camera_parts_0353-20#0353-20-03_-_standoff.2C_M2.2FM2.5.2C_8.5mm_high.2C_DIA_4.5mm | 0353-20-03 - standoff, M2/M2.5, 8.5mm high, DIA 4.5mm ]] ===
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-20#0353-20-04_-_Spacer_for_tripod_mount | 0353-20-04 - Spacer for tripod mount ]] ===
|-
 
| [[Image:0353-11-01.jpeg|thumb|[[Media:0353-11-01.stp.tar.gz|3d (step)]]  [[Media:0353-11-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-11-01.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
==== 0353-11-02 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), l=104.77mm ====
 
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-11-02.jpeg|thumb|[[Media:0353-11-02.stp.tar.gz|3d (step)]]  [[Media:0353-11-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-11-02.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
==== 0353-11-03 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), and 1.8" HDD,  l=104.77mm ====
+
----
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-11-03.jpeg|thumb|[[Media:0353-11-03.stp.tar.gz|3d (step)]]  [[Media:0353-11-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-11-03.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
==== 0353-11-10 - stereo crossbar cover,  l=300mm ====
+
== [[Elphel_camera_parts_0353-24 | 0353-24 - other Eyesis4pi parts ]] ==
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-24#0353-24-01_-_Allen_key_guide | 0353-24-01 Allen key guide]] ===
|-
 
| [[Image:0353-11-10.jpeg|thumb|[[Media:0353-11-10.stp.tar.gz|3d (step)]]  [[Media:0353-11-10.dxf.tar.gz|2d (dxf)]]  [[Media:0353-11-10.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
=== 0353-12 - front ends ===
+
=== [[Elphel_camera_parts_0353-24#0353-24-02_-_Cable_holder  | 0353-24-02 Cable holder]] ===
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
 
  
==== 0353-12-01 - Sensor front end for 10318/10338 boards ====
+
=== [[Elphel_camera_parts_0353-24#0353-24-03_-_PCB_holder.2C_Rev._A | 0353-24-03 SATA/eSATA adapter PCB holder, Rev. A]] ===
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-24#0353-24-04_-_Cable_clamp | 0353-24-04 Cable clamp]] ===
|-
+
=== [[Elphel_camera_parts_0353-24#0353-24-06_-_Enclosure_body  | 0353-24-06 Enclosure body]] ===
| [[Image:0353-12-01.jpeg|thumb|[[Media:0353-12-01.stp.tar.gz|3d (step)]]  [[Media:0353-12-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-12-01.pdf|2d (pdf)]]]] ||
+
=== [[Elphel_camera_parts_0353-24#0353-24-07_-_Connector_panel | 0353-24-07 Connector panel]] ===
|-
+
=== [[Elphel_camera_parts_0353-24#0353-24-08_-_Plug_core | 0353-24-08 Plug core]] ===
|}
+
=== [[Elphel_camera_parts_0353-24#0353-24-09_-_Plug_plunger  | 0353-24-09 Plug plunger]] ===
 +
=== [[Elphel_camera_parts_0353-24#0353-24-10_-_Plug_nut| 0353-24-10 Plug nut]] ===
 +
=== [[Elphel_camera_parts_0353-24#0353-24-11_-_Plug_cap | 0353-24-11 Plug cap]] ===
 +
=== [[Elphel_camera_parts_0353-24#0353-24-12_-_Enclosure_flange | 0353-24-12 Enclosure flange]] ===
  
==== 0353-12-10 - Stereo crossbar mount ====
+
----
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-12-10.jpeg|thumb|[[Media:0353-12-10.stp.tar.gz|3d (step)]]  [[Media:0353-12-10.dxf.tar.gz|2d (dxf)]]  [[Media:0353-12-10.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
==== 0353-12-11 - Elbow 45 deg. for the sensor front end ====
+
== [[Elphel_camera_parts_0353-27 | 0353-27 - parts internal other]] ==
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-27#0353-27-01_SATA_multiplexer_heat_sink_rail.2C_aluminum  | 0353-27-01 - SATA multiplexer heat sink rail, aluminum]] ===
|-
+
=== [[Elphel_camera_parts_0353-27#0353-27-02_SATA_multiplexer_heat_sink.2C_aluminum  | 0353-27-02 - SATA multiplexer heat sink, aluminum ]] ===
| [[Image:0353-12-11.jpeg|thumb|[[Media:0353-12-11.stp.tar.gz|3d (step)]]  [[Media:0353-12-11.dxf.tar.gz|2d (dxf)]]  [[Media:0353-12-11.pdf|2d (pdf)]]]] ||
+
----
|-
+
----
|}
 
  
==== 0353-12-12 - Front end plug ====
+
== [[Elphel_camera_parts_0353-30 | 0353-30 - insulator tubing, spacers, tapes ]] ==
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-30#0353-30-01_-_insulator_tubing.2C_l.3D12.5mm_.2C_ID.3D4.5MM_.28heat_shrink_OK.29 | 0353-30-01 - insulator tubing, l=12.5mm , ID=4.5MM (heat shrink OK) ]] ===
|-
+
=== [[Elphel_camera_parts_0353-30#0353-30-02_-_Flex_cable_holder_for_the_HDD | 0353-30-02 - Flex cable holder for the HDD ]] ===
| [[Image:0353-12-12.jpeg|thumb|[[Media:0353-12-12.stp.tar.gz|3d (step)]]  [[Media:0353-12-12.dxf.tar.gz|2d (dxf)]]  [[Media:0353-12-12.pdf|2d (pdf)]]]] ||
+
=== [[Elphel_camera_parts_0353-30#0353-30-03_-_Silicone_Ring.2C_OD.3D59mm.2C_ID.3D54mm.2C_t.3D4.5mm | 0353-30-03 - Silicone Ring, OD=59mm, ID=54mm, t=4.5mm ]] ===
|-
+
=== [[Elphel_camera_parts_0353-30#0353-30-04_-_O-ring.2C_Silicone.2C_OD.3D2_3.2F8.22.2C_ID.3D2_1.2F8.22 | 0353-30-04 - O-ring, Silicone, OD=2 3/8", ID=2 1/8" ]] ===
|}
+
=== [[Elphel_camera_parts_0353-30#0353-30-06_-_O-ring.2C_OD.3D40mm.2C_ID.3D37mm | 0353-30-06 - O-ring, OD=40mm, ID=37mm ]] ===
 +
=== [[Elphel_camera_parts_0353-30#0353-30-07_-_O-ring.2C_OD.3D61mm.2C_ID.3D58mm | 0353-30-07 - O-ring, OD=61mm, ID=58mm ]] ===
 +
=== [[Elphel_camera_parts_0353-30#0353-30-08_-_O-ring | 0353-30-08 - O-ring ]] ===
 +
=== [[Elphel_camera_parts_0353-30#0353-30-09_-_O-ring | 0353-30-09 - O-ring ]] ===
 +
=== [[Elphel_camera_parts_0353-30#0353-30-10_-_O-ring | 0353-30-10 - O-ring ]] ===
 +
=== [[Elphel_camera_parts_0353-30#0353-30-11_-_O-ring | 0353-30-11 - O-ring ]] ===
 +
=== [[Elphel_camera_parts_0353-30#0353-30-12_-_O-ring | 0353-30-12 - O-ring ]] ===
 +
=== [[Elphel_camera_parts_0353-30#0353-30-13_-_O-ring | 0353-30-13 - O-ring ]] ===
  
=== 0353-13 - back panels ===
+
=== [[Elphel_camera_parts_0353-30#0353-30-14 - O-ring | 0353-30-14 - O-ring ]] ===
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
 
  
==== 0353-13-01  - Back panel, only network (RJ45) connector ====
+
=== [[Elphel_camera_parts_0353-30#0353-30-20_-_Sensor_Board_Spacer | 0353-30-20 - Sensor Board Spacer ]] ===
==== 0353-13-02  - Back panel, with holes for network, SATA and USB connectors ====
+
=== [[Elphel_camera_parts_0353-30#0353-30-21_-_Sensor_Foam_Gasket | 0353-30-21 - Sensor Foam Gasket ]] ===
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-30#0353-30-24_-_Silicone_Gasket_for_M40.5_filter | 0353-30-24 - Silicone Gasket for M40.5 filter ]] ===
|-
+
=== [[Elphel_camera_parts_0353-30#0353-30-25_-_Silicone_Gasket_for_M72_filter | 0353-30-25 - Silicone Gasket for M72 filter ]] ===
| [[Image:0353-13-02.jpeg|thumb|[[Media:0353-13-02.stp.tar.gz|3d (step)]]  [[Media:0353-13-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-13-02.pdf|2d (pdf)]]]] ||
+
----
|-
+
----
|}
+
==  [[Elphel_camera_parts_0353-40 | 0353-40 - Tools and Fixtures ]] ==
 +
=== [[Elphel_camera_parts_0353-40#0353-40-01_-_Focus_motors_mounting_plate | 0353-40-01 - Focus motors mounting plate ]] ===
 +
=== [[Elphel_camera_parts_0353-40#0353-40-02_-_Shaft | 0353-40-02 - Shaft ]] ===
 +
=== [[Elphel_camera_parts_0353-40#0353-40-03_-_Hex_Shaft.2C_l.3D9mm | 0353-40-03 - Hex Shaft, l=9mm ]] ===
 +
=== [[Elphel_camera_parts_0353-40#0353-40-04_-_Hex_Shaft.2C_l.3D14mm | 0353-40-04 - Hex Shaft, l=14mm ]] ===
  
== 0353-17 - decals/overlays ==
+
=== [[Elphel_camera_parts_0353-40#0353-40-10_-_Filter_Insertion.2Fremoval_tool.2C_M40.5x0.5 | 0353-40-10 - Filter Insertion/removal tool, M40.5x0.5 ]] ===
=== 0353-17-01 - back panel overlay, network only ===
 
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-17-01.jpeg|thumb|[[Media:0353-17-01.stp.tar.gz|3d (step)]]  [[Media:0353-17-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-17-01.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
=== 0353-17-02 - back panel overlay for 10369A (RJ45, SATA, USB) ===
 
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-17-02.jpeg|thumb|[[Media:0353-17-02.stp.tar.gz|3d (step)]]  [[Media:0353-17-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-17-02.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
=== 0353-17-03 - bottom overlay ===
 
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-17-03.jpeg|thumb|[[Media:0353-17-03.stp.tar.gz|3d (step)]]  [[Media:0353-17-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-17-03.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
== 0353-18    - parts external other ==
 
=== 0353-18-01  - tripod mount, 1/4-20 thread ===
 
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
 
  
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-40#0353-40-11_-_Filter_Insertion.2Fremoval_tool.2C_M72x0.5 | 0353-40-11 - Filter Insertion/removal tool, M72x0.5 ]] ===
|-
 
| [[Image:0353-18-01.jpeg|thumb|[[Media:0353-18-01.stp.tar.gz|3d (step)]]  [[Media:0353-18-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-18-01.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
=== 0353-18-02  - connector cover ===
+
----
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T0], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
 
  
{| border="0" cellpadding="2"
+
==  [[Elphel_camera_parts_0353-48 | 0353-48 - Standard Tools ]] ==
|-
+
=== [[Elphel_camera_parts_0353-48#0353-48-01_-_High-Torque_Ball-Point_Hex_L-Key_1.5_mm_Hex.2C_3-1.2F2.22_Blade_Length | 0353-48-01 - Ball-Point Hex L-Key 1.5 mm ]] ===
| [[Image:0353-18-02.jpeg|thumb|[[Media:0353-18-02.stp.tar.gz|3d (step)]]  [[Media:0353-18-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-18-02.pdf|2d (pdf)]]]] ||
+
=== [[Elphel_camera_parts_0353-48#0353-48-02_-_High-Torque_Ball-Point_Hex_L-Key_2_mm_Hex.2C_3-1.2F2.22_Blade_Length | 0353-48-02 - Ball-Point Hex L-Key 2 mm ]] ===
|-
+
=== [[Elphel_camera_parts_0353-48#00353-48-03_-_Metric_High-Visibility_L-Key_Long_Arm_1.5_mm_Hex_3-1.2F8.22_Length | 0353-48-03 - High-Visibility L-Key Long Arm 1.5 mm ]] ===
|}
+
=== [[Elphel_camera_parts_0353-48#0353-48-04_-_Metric_High-Visibility_L-Key_Long_Arm_2_mm_Hex_3-5.2F16.22_Length | 0353-48-04 - High-Visibility L-Key Long Arm 2 mm ]] ===
 +
=== [[Elphel_camera_parts_0353-48#0353-48-05_-_L-Key_Long_Arm_0.9_mm_Hex_2-13.2F16.22_Length | 0353-48-05- L-Key Long Arm 0.9 mm ]] ===
 +
=== [[Elphel_camera_parts_0353-48#0353-48-06_-_L-Key_Short_Arm_0.9_mm_Hex_1-5.2F16.22_Length | 0353-48-06- L-Key Short Arm 0.9 mm ]] ===
 +
=== [[Elphel_camera_parts_0353-48#0353-48-07_-_L-Key_Short_Arm_1.3_mm_Hex_1-3.2F4.22_Length | 0353-48-07- L-Key Short Arm 1.3 mm ]] ===
 +
=== [[Elphel_camera_parts_0353-48#0353-48-08_-_L-Key_Short_Arm_2_mm_Hex_2.22_Length | 0353-48-08- L-Key Short Arm 2 mm ]] ===
  
=== 0353-18-03  - Enclosure for the 1.8" HDD, bottom ===
+
== [[Elphel_camera_parts_0353-60 | 0353-60 - custom extruded profiles ]] ==
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
+
=== [[Elphel_camera_parts_0353-60#0353-60-01_-_aluminum_extrusion_for_camera_bottoms | 0353-60-01 - aluminum extrusion for camera bottoms ]] ===
 +
=== [[Elphel_camera_parts_0353-60#0353-60-02_-_aluminum_extrusion_for_camera_tops | 0353-60-02 - aluminum extrusion for camera tops ]] ===
 +
=== [[Elphel_camera_parts_0353-60#0353-60-03_-_aluminum_extrusion_for_camera_tops.2Fbottoms_.2849x43.5.29 | 0353-60-03 - aluminum extrusion for camera tops/bottoms (49x43.5) ]] ===
  
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-18-03.jpeg|thumb|[[Media:0353-18-03.stp.tar.gz|3d (step)]]  [[Media:0353-18-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-18-03.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
=== 0353-18-04  - Enclosure for the 1.8" HDD, top ===
+
----
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
 
  
{| border="0" cellpadding="2"
+
== [[Elphel_camera_parts_0353-60 | 0353-61 - packaging cases ]] ==
|-
+
=== [[Elphel_camera_parts_0353-60#0353-61-01_-_SKB_case_9.25.22_H_x_7.125.22_W_x_4.125.22_D_.28inside.29.2C_3I-0907-4B-C | 0353-61-01 - SKB case for NC353L ]] ===
| [[Image:0353-18-04.jpeg|thumb|[[Media:0353-18-04.stp.tar.gz|3d (step)]]  [[Media:0353-18-04.dxf.tar.gz|2d (dxf)]]  [[Media:0353-18-04.pdf|2d (pdf)]]]] ||
+
=== [[Elphel_camera_parts_0353-60#0353-61-02_-_SKB_Mil-Standard_Injection_Molded_Cases:_16.22L_x_10.22W_x_5_1.2F2.22H_.28Inside.29_-_3I1610-5B | 0353-61-02 - SKB case for Stereo Camera ]] ===
|-
+
=== [[Elphel_camera_parts_0353-60#0353-61-03_-_SKB_ATA_Utility_Case:_14_5.2F8.22_H_x_18_1.2F4.22_W_x_14_1.2F8.22_D_.28outside.29_-_1SKB-1713 | 0353-61-03 - SKB case for Eyesis ]] ===
|}
 
  
=== 0353-18-05  - 5mm C mount adapter ring ===
+
----
 +
==  [[Elphel_camera_parts_0353-60 | 0353-62 - Foam for packaging cases -custom cut ]] ==
 +
=== [[Elphel_camera_parts_0353-60#0353-62-01_-_Foam_Bottom_for_SKB_case_9.25.22_H_x_7.125.22_W_x_4.125.22_D_.28inside.29| 0353-62-01 - Foam Bottom for SKB case - NC353L ]] ===
 +
=== [[Elphel_camera_parts_0353-60#0353-62-02_-_Foam_for_SKB_Mil-Standard_Injection_Molded_Cases:_16.22L_x_10.22W_x_5_1.2F2.22H_.28Inside.29_-_3I1610-5B | 0353-62-02 - Foam for SKB case - Stereo Camera ]] ===
 +
=== [[Elphel_camera_parts_0353-60#0353-62-03_-_Foam_for_SKB_ATA_Utility_Case:_14_5.2F8.22_H_x_18_1.2F4.22_W_x_14_1.2F8.22_D_.28outside.29_-_1SKB-1713 | 0353-62-03 - Foam for SKB case - Eyesis ]] ===
 +
=== [[Elphel_camera_parts_0353-60#0353-62-04_-_Foam_Top_for_SKB_case_9.25.22_H_x_7.125.22_W_x_4.125.22_D_.28inside.29 | 0353-62-04 - Foam Top for SKB case - NC353L ]] ===
  
=== 0353-18-06  - C mount cap ===
+
----
  
== 0353-19    - parts internal other ==
+
== [[Elphel_camera_parts_0353-70 | 0353-70 - optical components ]] ==
=== 0353-19-01 - CF support ===
+
=== [[Elphel_camera_parts_0353-70#0353-70-01_-_IR_cutoff_filter.2C_DIA_20.0mm.2C_t.3D0.3mm | 0353-70-01 - IR cutoff filter, DIA 20.0mm, t=0.3mm ]] ===
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
+
=== [[Elphel_camera_parts_0353-70#0353-70-10_-_Protective_Window.2C_OD.3D59mm.2Ct.3D3mm | 0353-70-10 - Protective Window, OD=59mm,t=3mm ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-20_-_5mm_CS-mount_to_C-mount_Adapter_Ring | 0353-70-20 - 5mm CS-mount to C-mount Adapter Ring ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-21_-_C-Mount to M12 Lens Adapter w/Oring | 0353-70-21 - C-Mount to M12 Lens Adapter w/Oring ]] === 
 +
=== [[Elphel_camera_parts_0353-70#0353-70-22_-_Lens thread adapter: M12x0.5 to C- or CS- mount, aluminum | 0353-70-22 - Lens thread adapter: M12x0.5 to C- or CS- mount, aluminum ]] ===
  
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-70#0353-70-25_-_Lens Cap, universal, plastic | 0353-70-25 - Lens Cap, universal, plastic ]] ===
|-
 
| [[Image:0353-19-01.jpeg|thumb|[[Media:0353-19-01.stp.tar.gz|3d (step)]]  [[Media:0353-19-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-19-01.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
=== 0353-19-02 - CF support ===
+
=== [[Elphel_camera_parts_0353-70#0353-70-32_-_UV_filter.2C_37mm | 0353-70-32 - UV filter, 37mm ]] ===
Material: [http://en.wikipedia.org/wiki/6061_aluminum aluminium alloy 6061-T4], surface finition: [http://en.wikipedia.org/wiki/Anodized black anodized]
+
=== [[Elphel_camera_parts_0353-70#0353-70-34_-_UV_filter.2C_52mm | 0353-70-34 - UV filter, 52mm ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-35_-_UV_filter.2C_58mm | 0353-70-35 - UV filter, 58mm ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-36_-_UV_protective_filter.2C_M40.5x0.5 | 0353-70-36 - UV protective filter, M40.5x0.5 ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-38_-_UV_protective_filter.2C_M72x0.75 | 0353-70-38 - UV protective filter, M72x0.75 ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-41_-_Fujinon_HF16SA-1_f.3D16mm_Megapixel_Lens | 0353-70-41 - Fujinon HF16SA-1 f=16mm Megapixel Lens ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-42_-_Kowa_LM3NCM_f.3D3.5mm_Lens | 0353-70-42 - Kowa LM3NCM f=3.5mm Lens ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-43_-_Fujinon_fe185c057ha1_Fisheye_Lens | 0353-70-43 - Fujinon fe185c057ha1 Fisheye Lens ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-44_-_Computar_Varifocal_Lens_H2Z0414C-MP_4-8mm_F1.4_Manual_Iris_Vari-Focal_C-Mount.2C_3_MPix | 0353-70-44 - Computar Varifocal Lens H2Z0414C-MP 4-8mm F1.4 Manual Iris Vari-Focal C-Mount, 3 MPix ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-45_-_Fujinon_fe12.5SA-1_12.5mm_F1.4_C-Mount | 0353-70-45 - Fujinon fe12.5SA-1 12.5mm F1.4 C-Mount ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-46_-_Lens.2C_M12 | 0353-70-46 - Lens, M12 ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-47_-_Lens.2C_M12 | 0353-70-47 - Lens, M12 ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-48_-_Lens.2C_M12.2C_f.3D4.5mm | 0353-70-48 - Lens, M12, f=4.5mm ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-49_-_Lens.2C_f.3D4.5mm_M12 | 0353-70-49 - Lens, f=4.5mm M12 ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-50_-_Lens.2C_f.3D5.0mm.2C_C-mount | 0353-70-50 - Lens, f=5.0mm, C-mount ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-51_-_Lens.2C_f.3D5.0mm.2C_M12 | 0353-70-51 - Lens, f=5.0mm, M12 ]] ===
 +
=== [[Elphel_camera_parts_0353-70#0353-70-53_-_Lens.2C_M12.2C_f.3D2.0mm | 0353-70-53 - Lens, M12, f=2.0mm ]] ===
  
{| border="0" cellpadding="2"
+
----
|-
+
----
| [[Image:0353-19-02.jpeg|thumb|[[Media:0353-19-02.stp.tar.gz|3d (step)]]  [[Media:0353-19-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-19-02.pdf|2d (pdf)]]]] ||
+
----
|-
 
|}
 
  
=== 0353-19-03  - OS5000 support ===
+
== [[Elphel_camera_parts_0353-80 | 0353-80 - other standard parts ]] ==
Material: [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene black ABS]
+
== [[Elphel_camera_parts_0353-80#0353-82_-_rivets |0353-82 - rivets ]] ==
 +
=== [[Elphel_camera_parts_0353-80#0353-82-01_-_Rivet.2C_Mandrel |0353-82-01 - Rivet, Mandrel ]] ===
  
{| border="0" cellpadding="2"
+
== [[Elphel_camera_parts_0353-80#0353-83_-_springs | 0353-83 - springs ]] ==
|-
+
=== [[Elphel_camera_parts_0353-80#0353-83-01_-_Compression_spring | 0353-83-01 - Compression spring ]] ===
| [[Image:0353-19-03.jpeg|thumb|[[Media:0353-19-03.stp.tar.gz|3d (step)]]  [[Media:0353-19-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-19-03.pdf|2d (pdf)]]]] ||
+
=== [[Elphel_camera_parts_0353-80#0353-83-02_-_Compression_spring | 0353-83-02 - Compression spring ]] ===
|-
+
=== [[Elphel_camera_parts_0353-80#0353-83-10_-_Spring_loaded_catch | 0353-83-10 - Spring loaded catch ]] ===
|}
+
== [[Elphel_camera_parts_0353-80#0353-84_-_pins | 0353-84 - pins ]] ==
 +
=== [[Elphel_camera_parts_0353-80#0353-84-01_-_Dowel_pin | 0353-84-01 - Dowel pin ]] ===
  
== 0353-20 - custom mounting parts ==
+
== [[Elphel_camera_parts_0353-80#0353-85_-_threaded_spacers_for_other_than_M2_and_M2.5 | 0353-85 - threaded spacers for other than M2 and M2.5 ]] ==
=== 0353-20-01 - standoff, M2/M2.5, 14.5mm high, DIA 4.5mm ===
+
== [[Elphel_camera_parts_0353-80#0353-86_-_threaded_spacers_for_M2.5 | 0353-86 - threaded spacers for M2.5 ]] ==
{| border="0" cellpadding="2"
+
== [[Elphel_camera_parts_0353-80#0353-87_-_threaded_spacers_for_M2 | 0353-87 - threaded spacers for M2 ]] ==
|-
+
== [[Elphel_camera_parts_0353-80#0353-88_-_unthreaded_spacers_for_other_than_M2_and_M2.5 | 0353-88 - unthreaded spacers for other than M2 and M2.5 ]] ==
| [[Image:0353-20-01.jpeg|thumb|[[Media:0353-20-01.stp.tar.gz|3d (step)]]  [[Media:0353-20-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-20-01.pdf|2d (pdf)]]]] ||
+
=== [[Elphel_camera_parts_0353-80#0353-88-41_-_Unthreaded_spacer_for_M5.2C_l.3D3mm | 0353-88-41 - Unthreaded spacer for M5, l=3mm ]] ===
|-
 
|}
 
== 0353-30 - insulator tubing, spacers, tapes ==
 
=== 0353-30-01 - insulator tubing, l=12.5mm , ID=4.5MM (heat shrink OK) ===
 
{| border="0" cellpadding="2"
 
|-
 
| [[Image:0353-30-01.jpeg|thumb|[[Media:0353-30-01.stp.tar.gz|3d (step)]]  [[Media:0353-30-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-30-01.pdf|2d (pdf)]]]] ||
 
|-
 
|}
 
  
=== 0353-30-02 - Flex cable holder for the HDD ===
+
== [[Elphel_camera_parts_0353-80#0353-89_-_unthreaded_spacers_for_M2.5 | 0353-89 - unthreaded spacers for M2.5 ]] ==
Material: [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene white ABS]
+
== [[Elphel_camera_parts_0353-80#0353-90_-_unthreaded_spacers_for_M2 | 0353-90 - unthreaded spacers for M2 ]] ==
{| border="0" cellpadding="2"
+
=== [[Elphel_camera_parts_0353-80#0353-90-01_-_spacer.2C_l.3D4mm | 0353-90-01 - spacer, l=4mm ]] ===
|-
+
=== [[Elphel_camera_parts_0353-80#0353-90-02_-_spacer.2C_l.3D6mm | 0353-90-02 - spacer, l=6mm ]] ===
| [[Image:0353-30-02.jpeg|thumb|[[Media:0353-30-02.stp.tar.gz|3d (step)]]  [[Media:0353-30-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-30-02.pdf|2d (pdf)]]]] ||
+
=== [[Elphel_camera_parts_0353-80#0353-90-03_-_spacer.2C_l.3D4.8mm | 0353-90-03 - spacer, l=4.8mm ]] ===
|-
 
|}
 
  
== 0353-60 - custom extruded profiles ==
+
== [[Elphel_camera_parts_0353-80#0353-91_-_nuts_for_other_than_M2_and_M2.5 | 0353-91 - nuts for other than M2 and M2.5 ]] ==
=== 0353-60-01 - aluminum extrusion for camera bottoms ===
+
=== [[Elphel_camera_parts_0353-80#0353-91-11_M3_Hex_Nut | 0353-91-11 M3 Hex Nut ]] ===
=== 0353-60-02 - aluminum extrusion for camera tops ===
+
=== [[Elphel_camera_parts_0353-80#0353-91-90_Slotted_spanner_nut.2C_M30x1.5.2C_DIN1804W | 0353-91-90 Slotted spanner nut, M30x1.5, DIN1804W ]] ===
== 0353-70 - optical components ==
+
== [[Elphel_camera_parts_0353-80#0353-92_-_nuts_for_M2.5 | 0353-92 - nuts for M2.5 ]] ==
=== 0353-70-01 - IR cutoff filter, DIA 20.0mm, t=0.3mm ===
+
== [[Elphel_camera_parts_0353-80#0353-92_-_nuts_for_M2.5 | 0353-93 - nuts for M2 ]] ==
== 0353-80    - other standard parts ==
+
=== [[Elphel_camera_parts_0353-80#0353-93-01_M2_Hex_Nut | 0353-93-01 M2 Hex Nut ]] ===
== 0353-85    - threaded spacers for other than M2 and M2.5 ==
+
----
== 0353-86    - threaded spacers for M2.5 ==
+
----
== 0353-87    - threaded spacers for M2 ==
+
== [[Elphel_camera_parts_0353-94#0353-94_-_washers_for_other_than_M2_and_M2.5 | 0353-94 - washers for other than M2 and M2.5 ]] ==
== 0353-88    - unthreaded spacers for other than M2 and M2.5 ==
+
=== [[Elphel_camera_parts_0353-94#0353-94-11_-_Washer_for_M3 | 0353-94-11 - Washer for M3 ]] ===
== 0353-89    - unthreaded spacers for M2.5 ==
+
=== [[Elphel_camera_parts_0353-94#0353-94-41_-_Washer_for_M4.2C_plastic | 0353-94-41 - Washer for M4, plastic ]] ===
== 0353-90    - unthreaded spacers for M2 ==
+
=== [[Elphel_camera_parts_0353-94#0353-94-42_-_Washer_for_M4 | 0353-94-42 - Washer for M4 ]] ===
=== 0353-90-01  - spacer, l=4mm (~McMaster p/n 92510A005 - approximate to metric) ===
+
=== [[Elphel_camera_parts_0353-94#0353-94-61_-_Washer.2C_plastic | 0353-94-61 - Washer, plastic ]] ===
== 0353-91    - nuts for other than M2 and M2.5 ==
+
== [[Elphel_camera_parts_0353-94#0353-95_-_washers_for_M2.5 | 0353-95 - washers for M2.5 ]] ==
== 0353-92    - nuts for M2.5 ==
+
== [[Elphel_camera_parts_0353-94#0353-96_-_washers_for_M2 | 0353-96 - washers for M2 ]] ==
== 0353-93    - nuts for M2 ==
+
=== [[Elphel_camera_parts_0353-94#0353-96-01_-_Washer_for_M2.2C_Stainless_Steel_316.2C_OD.3D5mm.2C_ID.3D2.2mm.2C_t.3D-0.3mm | 0353-96-01 - Washer for M2, Stainless Steel 316, OD=5mm, ID=2.2mm, t=-0.3mm ]] ===
== 0353-94    - washers for other than M2 and M2.5 ==
 
== 0353-95     - washers for M2.5 ==
 
== 0353-96     - washers for M2 ==
 
=== 0353-96-01 - Washer, Stainless Steel (McMaster p/n 90965A110) ===
 
  
== 0353-97    - Screws other than M2 and M2.5 ==
 
=== 0353-97-01  - Screw, Button cap, Stainless steel, #4-40, 0.19"long (McMaster p/n 92949A105 ) ===
 
  
== 0353-98     - Screws, Metric, M2.5 ==
+
----
=== 0353-98-01  - Screw, M2.5, Socket cap, Black anodized,  l=6mm (McMaster p/n 91290A101 ) ===
+
----
=== 0353-98-02 - Screw, M2.5, Flat socket cap, Stainless steel, l=6mm (McMaster p/n 92125A084 ) ===
+
== [[Elphel_camera_parts_0353-97 | 0353-97     - Screws other than M2 and M2.5 ]] ==
 +
=== [[Elphel_camera_parts_0353-97#0353-97-01_-_Screw.2C_Button_cap.2C_Stainless_Steel_18-8.2C_.234-40.2C_0.19.22long | 0353-97-01  - Screw, Button cap, Stainless Steel 18-8, #4-40, 0.19"long ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-02_-_Screw.2C_Button_cap.2C_Stainless_Steel_18-8.2C_.234-40.2C_1.2F8.22long | 0353-97-02  - Screw, Button cap, Stainless Steel 18-8, #4-40, 1/8"long ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-03_-_Screw_flat_.234-40.2C_Philips | 0353-97-03 - Screw flat #4-40, Philips ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-10_-_Screw_M3.2C_Flat.2C_Socket_Cap.2C_Steel.2C_Black.2C_l.3D8mm | 0353-97-10  - Screw M3, Flat, Socket Cap, Steel, Black, l=8mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-12_-_Screw_M3.2C_socket_head.2C_l.3D10mm | 0353-97-12 - Screw M3, socket head, l=10mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-13_-_Set_Screw_M3_x_6mm_With_Nylon_tip | 0353-97-13 - Set Screw M3 x 6mm With Nylon tip ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-14_-_Screw_M3.2CSocket_Cap.2C_l.3D6mm | 0353-97-14 - Screw M3,Socket Cap, l=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-15_-_Screw_Shoulder_M3.2C_l.3D4mm.2C_D.3D4mm | 0353-97-15 - Screw Shoulder M3, l=4mm, D=4mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-16_-_Screw_Shoulder_M3.2C_l.3D5mm.2C_D.3D4mm | 0353-97-16 - Screw Shoulder M3, l=5mm, D=4mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-17_-_Screw_Shoulder_M3.2C_l.3D8mm.2C_D.3D4mm | 0353-97-17 - Screw Shoulder M3, l=8mm, D=4mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-20_-_Screw.2C_M1.6.2C_Socket_Cap.2C_Steel.2C_Black.2C_l.3D6mm | 0353-97-20 - Screw, M1.6, Socket Cap, Steel, Black, l=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-26_-_Screw_M1.6.2C_socket_head.2C_l.3D3mm.2C_Black_anodize | 0353-97-26 - Screw, M1.6, Socket Cap, Steel, Black, l=3mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-30_-_Screw.2C_M5.2C_Socket_Cap.2C_l.3D10mm | 0353-97-30 - Screw, M5, Socket Cap, l=10mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-31_-_Screw.2C_M5.2C_Socket_Cap.2C_l.3D16mm | 0353-97-31 - Screw, M5, Socket Cap, l=16mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-32_-_Screw_M5.2C_socket_head.2C_l.3D8mm | 0353-97-32 - Screw M5, socket head, l=8mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-34_-_Screw_M5.2C_socket_head.2C_l.3D6mm | 0353-97-34 - Screw M5, socket head, l=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-40_-_Screw.2C_M4.2C_Socket_Cap.2C_l.3D16mm | 0353-97-40 - Screw, M4, Socket Cap, l=16mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-42_-_Screw_Shoulder_M5.2C_l.3D20mm.2C_D.3D6mm | 0353-97-42 - Screw Shoulder M5, l=20mm, D=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-43_-_Screw_Shoulder_M5.2C_l.3D45mm.2C_D.3D6mm | 0353-97-43 - Screw Shoulder M5, l=45mm, D=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-50_-_Screw.2C_M6.2C_Socket_Cap.2C_l.3D16mm | 0353-97-50 - Screw, M6, Socket Cap, l=16mm ]] ===
 +
=== [[Elphel_camera_parts_0353-97#0353-97-61_-_Screw_M8_modified_-_REDUCED_HEAD_SIZE | 0353-97-61 - Screw M8 modified - REDUCED HEAD SIZE ]] ===
 +
----
 +
----
  
=== 0353-98-03  - Screw, M2.5, Flat socket cap, Stainless steel, l=12mm (McMaster-Carr p/n 93395A182 ) ===
+
==   [[Elphel_camera_parts_0353-98 | 0353-98 - Screws, Metric, M2.5 ]] ==
 +
=== [[Elphel_camera_parts_0353-98#0353-98-01_-_Screw.2C_M2.5.2C_Socket_cap.2C_Black_anodized.2C_l.3D6mm | 0353-98-01 - Screw, M2.5, Socket cap, Black anodized,  l=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-02_-_Screw.2C_M2.5.2C_Flat_Socket_Cap.2C_Stainless_steel.2C_l.3D6mm | 0353-98-02 - Screw, M2.5, Flat Socket Cap, Stainless steel, l=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-03_-_Screw.2C_M2.5.2C_Flat_Socket_Cap.2C_Stainless_steel.2C_l.3D12mm | 0353-98-03 - Screw, M2.5, Flat Socket Cap, Stainless steel, l=12mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-05_-_Screw.2C_M2.5.2C_Flat_Socket_Cap.2C_Steel.2C_Black.2C_l.3D8mm | 0353-98-05 - Screw, M2.5, Flat Socket Cap, Steel, Black, l=8mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-06_-_Screw.2C_M2.5.2C_Button_Head_Socket_Cap.2C_Steel.2C_Black.2C_l.3D4mm | 0353-98-06 - Screw, M2.5, Button Head Socket Cap, Steel, Black, l=4mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-07_-_Screw.2C_M2.5.2C_Socket_Cap.2C_Stainless_steel_18-8.2C_l.3D6mm | 0353-98-07 - Screw, M2.5, Socket Cap, Stainless steel 18-8, l=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-08_-_Screw.2C_M2.5.2C_Socket_Cap.2C_Stainless_steel_18-8.2C_l.3D8mm | 0353-98-08 - Screw, M2.5, Socket Cap, Stainless steel 18-8, l=8mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-09_-_Screw.2C_M2.5.2C_Socket_Cap.2C_Black_Oxide.2C_l.3D12mm | 0353-98-09 - Screw, M2.5, Socket Cap, Black Oxide, l=12mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-10_-_Set_Screw.2C_M2.5.2C_Socket_Cap.2C_Stainless_Steel_18-8.2C_l.3D6mm | 0353-98-10 - Set Screw, M2.5, Socket Cap, Stainless Steel 18-8, l=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-11_-_Screw.2C_M2.5.2C_Socket_cap.2C_Stainless_Steel_18-8.2C_l.3D12mm | 0353-98-11 - Screw, M2.5, Socket cap, Stainless Steel 18-8, l=12mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-12_-_Screw.2C_M2.5.2C_Socket_cap.2C_Stainless_Steel_18-8.2C_l.3D16mm | 0353-98-12 - Screw, M2.5, Socket cap, Stainless Steel 18-8, l=16mm ]] ===
 +
=== [[Elphel_camera_parts_0353-98#0353-98-13_-_Screw.2C_M2.5.2C_Socket_Cap.2C_Black_Oxide.2C_l.3D8mm | 0353-98-13 - Screw, M2.5, Socket Cap, Black Oxide, l=8mm ]] ===
 +
----
 +
----
  
== 0353-99     - Screws, metric, M2 ==
+
==   [[Elphel_camera_parts_0353-99 | 0353-99 - Screws, metric, M2 ]] ==
=== 0353-99-01 - Screw, M2, Socket cap, Black anodized,  l=6mm (McMaster p/n 91239A704 )  ===
+
=== [[Elphel_camera_parts_0353-99#0353-99-01_-_Screw.2C_M2.2C_Socket_cap.2C_Black_anodized.2C_l.3D6mm | 0353-99-01 - Screw, M2, Socket cap, Black anodized,  l=6mm ]] ===
=== 0353-99-02 - Screw, M2, Socket cap, Stainless steel,  l=10mm (McMaster p/n 92290A017 ) ===
+
=== [[Elphel_camera_parts_0353-99#0353-99-02_-_Screw.2C_M2.2C_Socket_cap.2C_Stainless_steel_316.2C_l.3D10mm | 0353-99-02 - Screw, M2, Socket cap, Stainless steel 316,  l=10mm ]] ===
=== 0353-99-03  - Screw, M2, Socket cap, Stainless steel,  l=12mm (McMaster p/n 92290A019 ) ===
+
=== [[Elphel_camera_parts_0353-99#0353-99-03_-_Screw.2C_M2.2C_Socket_cap.2C_Stainless_steel_316.2C_l.3D12mm | 0353-99-03 - Screw, M2, Socket cap, Stainless steel 316,  l=12mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-04_-_Screw.2C_M2.2C_Flat_Socket_Cap.2C_Stainless_steel_18-8.2C_l.3D4mm | 0353-99-04 - Screw, M2, Flat Socket Cap, Stainless steel 18-8, l=4mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-05_-_Screw.2C_M2.2C_Flat_Socket_Cap.2C_Stainless_steel_18-8.2C_l.3D8mm | 0353-99-05 - Screw, M2, Flat Socket Cap, Stainless steel 18-8, l=8mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-06_-_Screw.2C_M2.2C_Flat_Socket_Cap.2C_Steel.2C_Black.2C_l.3D4mm | 0353-99-06 - Screw, M2, Flat Socket Cap, Steel, Blackl=4mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-10_-_Screw.2C_M2.2C_Button_Head_Socket_Cap.2C_Steel.2C_Black.2C_l.3D3mm | 0353-99-10 - Screw, M2, Button Head Socket Cap, Steel, Black, l=3mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-11_-_Set_Screw.2C_M2.2C_Socket_Cap.2C_Stainless_Steel_18-8.2C_l.3D4mm | 0353-99-11 - Set Screw, M2, Socket Cap, Stainless Steel 18-8, l=4mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-12_-_Set_Screw.2C_M2.2C_Socket_Cap.2C_Stainless_Steel_18-8.2C_l.3D6mm | 0353-99-12 - Set Screw, M2, Socket Cap, Stainless Steel 18-8, l=6mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-13_-_Set_Screw.2C_M2.2C_Socket_Cap.2C_Stainless_Steel_18-8.2C_l.3D12mm | 0353-99-13 - Set Screw, M2, Socket Cap, Stainless Steel 18-8, l=12mm ]] ===
  
=== 0353-99-04  - Screw, M2, Flat socket cap, Stainless steel, l=3mm (McMaster p/n 92125A050 ) ===
+
=== [[Elphel_camera_parts_0353-99#0353-99-15_-_Screw.2C_M2.2C_Button_Head_Socket_Cap.2C_Steel.2C_Black.2C_l.3D4mm | 0353-99-15 - Screw, M2, Button Head Socket Cap, Steel, Black, l=4mm ]] ===
=== 0353-99-10  - Set screw, M2, socket cap, Black anodized, l=3mm (McMaster p/n 91390A090 ) ===
+
=== [[Elphel_camera_parts_0353-99#0353-99-16_-_Screw.2C_M2.2C_Hex_Socket_Cap.2C_Steel.2C_Black.2C_l.3D4mm | 0353-99-16 - Screw, M2, Hex Socket Cap, Steel, Black, l=4mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-17_-_Screw_M2.2C_Flat.2C_Socket.2C_Stainless_steel_18-8.2C_l.3D10mm | 0353-99-17 - Screw M2, Flat, Socket, Stainless steel 18-8, l=10mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-18_-_Screw.2C_M2.2C_Socket_Head.2C_Stainless_steel_18-8.2C_l.3D16mm | 0353-99-18 - Screw, M2, Socket Head, Stainless steel 18-8, l=16mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-19_-_Screw.2C_M2.2C_Socket_Head.2C_Stainless_steel_18-8.2C_l.3D14mm | 0353-99-19 - Screw, M2, Socket Head, Stainless steel 18-8, l=14mm ]] ===
 +
=== [[Elphel_camera_parts_0353-99#0353-99-20_-_Screw.2C_M2.2C_Socket_Head.2C_Stainless_steel_18-8.2C_l.3D6mm | 0353-99-20 - Screw, M2, Socket Head, Stainless steel 18-8, l=6mm ]] ===

Latest revision as of 13:34, 7 November 2016

Elphel_camera_parts_0393 - other parts for NC393 series cameras

Contents

Camera Assemblies

NC353L

NC353L with 10369A and two CF cards

NC353L with 10369A and 1.8" HDD

ENC353

MNC354-2

MNC354-13



0353-00 PCB assemblies

0353-00-01 - 10353 rev E assembly

0353-00-02 - 10369 rev A assembly

0353-00-03 - 103693 rev A assembly

0353-00-04 - 103691 rev A assembly

0353-00-06 - 10338 rev A assembly

0353-00-10 - 10318 rev A assembly with 1.3 MPix monochrome

0353-00-11 - 10318 rev A assembly with 1.3 MPix color

0353-00-12 - 10318 rev A assembly with 3 MPix color

0353-00-13 - 10338 rev A assembly with 5 MPix monochrome

0353-00-14 - 10338 rev A assembly with 5 MPix color

0353-00-07 - 103692 assembly

0353-00-08 - 10359 rev A assembly

0353-00-15 - 10338 rev D assembly with 5 MPix Color Sensor

0353-00-16 - 10338 rev D assembly with 5 MPix Monochrome Sensor



0353-01 - cable assemblies

0353-01-01 - flex jumper, 30 conductors, 0.5mm pitch, l=30mm, t=0.3mm both ends

0353-01-02 - flex jumper, 10 conductors, 0.5mm pitch, l=76mm, t=0.3mm both ends

0353-01-03 - flex jumper, 40 conductors, 0.5mm pitch, l=70mm (one end t=0.3mm, other end t=0.2mm)

0353-01-04 - RJ45/DB9F Modular Adapter, wired

0353-01-05 - 6P6C crossed modular cable

0353-01-06 - Power Injector Cable for custom 12v-36v applications.

0353-01-07 - Power Injector Cable - 6 ft. for power supply - American

0353-01-08 - Power Injector Cable - 6 ft. for 48V power supply - European

0353-01-10 - Connector Molex, Microfit 3.0, 4 pins, p/n 43645-0400

0353-01-11 - Connector, Norcom D-sub 26 pins, p/n 180-026-203

0353-01-20 - flex jumper, 30 conductors, 0.5mm pitch, l=2" (50.8mm), t=0.3mm both ends

0353-01-21 - flex jumper, 30 conductors, 0.5mm pitch, l=4" (101.6mm), t=0.3mm both ends

0353-01-22 - flex jumper, 30 conductors, 0.5mm pitch, l=6" (152.4mm), t=0.3mm both ends

0353-01-23 - flex jumper, 30 conductors, 0.5mm pitch, l=8" (203.2mm), t=0.3mm both ends

0353-01-25 - flex jumper, 4 conductors, 0.5mm pitch, l=2" (50.8mm), t=0.3mm both ends

0353-01-40 - RJFTV21N - sealed 8p8n connector

0353-01-41 - USBFTV21N - sealed USB connector

0353-01-42 - Sealed 3-pin connector p/n D38999-20JA98SN

0353-01-50 - FPC flexible printed circuit 90 degree for panoramic head

0353-01-51 - FPC flexible printed circuit straight for panoramic head


0353-02 - Storage options & other electronic assemblies

0353-02-01 - CF card: 4GB Compact Flash - SanDisk SDCFX3-004G

0353-02-02 - 1.8" HDD: Toshiba MK8009GAH (HDD1764) 80GB, ATA, ZIF/LIF Connector

0353-02-03 - 2.5" HDD

0353-02-04 - Power Supply: 12v, 1.5A, AC/DC Power Adapter, International AC Multi-plug

0353-02-05 - Capal F16EA-03LLC DC Fan, 3VDC, 0.07W

0353-02-06 - Fan Sunon KDE0504PFV2.11.MS.A.GN, 5VDC, 0.7W

0353-02-08 - Fan Copal, 5VDC, 0.25W F310R-05LLC

0353-02-09 - 3" 1 TB HDD

0353-02-10 - 48V Ethernet cable Power Supply: Midspan power supply

0353-02-11 - 48V Ethernet cable Power Supply: Midspan power supply PW182RB4800F01

0353-02-20 - USB to Serial Converter

0353-02-21 - SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable

0353-02-30 - Ocean Server OS5000-US Digital compass (inside the camera)

0353-02-31 - Garmin GPS 18 USB GPS receiver (external)

0353-02-32 - EEE-SDK

0353-02-41 - AC/DC converter

0353-02-51 - GigE 5-port switch

0353-02-52 - Enclosure for 4x2.5" HDD


0353-03 - PCB boards

0353-03-01 - 10353 rev E Camera Processor PCB board

0353-03-02 - 10369 rev A Camera Interface PCB board

0353-03-03 - 103693 rev A USB connector PCB board

0353-03-04 - 103691 rev A CF card connector PCB board

0353-03-06 - 10338 rev A Sensor PCB board

0353-03-07 - 103692 rev A PCB board for HDD

0353-03-08 - 10359 Multifunction Multiplexor PCB board

0353-03-09 - 10338 rev D Image Sensor PCB board

0353-03-10 - 10364 Motor Driver PCB board



0353-04 - Components for PCB Assembly

0353-04-13 - 5 MPix Monochrome Sensor

0353-04-14 - 5 MPix Color Sensor

0353-04-20 - Traco 12 Volt power in 9-36V out 3.3V / 3500 mA



0353-07 Camera subassemblies

0353-07-01 Sensor Front End

0353-07-02 Sensor Front End

0353-07-03 Sensor Front End

0353-07-04 Sensor Front End

0353-07-05 Sensor Front End

0353-07-06 Sensor Front End

0353-07-07 Sensor Front End

0353-07-08 Sensor Front End

0353-07-11 Sensor Front End + 10338 revD + 5Mp Color Sensor + IR cut Filter + Adapter Ring + Cap + 4 screws

0353-07-21 Sensor Front End + 10338 rev A + 5Mp Color Sensor + IR cut Filter + Adapter Ring + Cap + 4 screws

0353-07-12 Sensor Front End + 10338 rev D + 5Mp Mono Sensor + Adapter Ring + Cap + 4 screws

0353-07-22 Sensor Front End + 10338 rev A + 5Mp Mono Sensor + Adapter Ring + Cap + 4 screws

0353-07-13 Sensor Front End + 10338 rev D + 5Mp Color Sensor + Adapter Ring + Cap + 4 screws

0353-07-14 Sensor Front End + 10338 rev D + 5Mp Mono Sensor + IR cut Filter + Adapter Ring + Cap + 4 screws



0353-08 NC353 Camera assemblies



0353-09 NC363 Camera assemblies



Major camera enclosure parts

0353-10 - bottoms

0353-10-01 - Camera Bottom, l=104.77mm

0353-10-02 - Camera Bottom, l=104.77mm

0353-10-03 - Tube Body for the Sealed Camera, OD=61mm, ID=58mm,l=200mm, Aluminum

0353-10-04 - Multicam-13 Camera Body, Aluminum, Black Anodize

0353-10-05 - Multicam-13 Head Body, Aluminum, Black Anodize

0353-10-06 - SFE Adapter Bottom for Opposite Sensors

0353-10-10 - stereo crossbar, stereo base=248.5mm, l=300mm

0353-10-11 - stereo crossbar, stereo base=248.5mm, l=300mm

0353-10-12 - Pano Head Bottom Plate

0353-10-13 - Body 3 Channel

0353-10-14 - Tube Mount

0353-10-15 - Support Pipe

0353-10-16 - Middle flange top

0353-10-17 - Tube body

0353-10-18 - Middle flange bottom

0353-10-19 - Tube Mount

0353-10-21 - Switchbox enclosure bottom

0353-10-22 - Support tube



0353-11 - tops

0353-11-01 - camera top plain (no connector holes), l=104.77mm

0353-11-02 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), l=104.77mm

0353-11-03 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), and 1.8" HDD, l=104.77mm

0353-11-06 - SFE Adapter Top for Opposite Sensors

0353-11-10 - stereo crossbar cover, l=300mm

0353-11-12 - Switchbox enclosure lid



0353-12 - front ends

0353-12-01 - Sensor front end for 10318/10338 boards

0353-12-02 - Sensor front end for the sealed camera

0353-12-03 - Sensor front end for 10318/10338 boards (old, round inside)

0353-12-10 - Stereo crossbar mount

0353-12-11 - Elbow 45 deg. for the sensor front end

0353-12-12 - Front end plug

0353-12-13 - Stereo crossbar end cap

0353-12-14 - Elbow 90 deg. for the sensor front end

0353-12-21 - Middle Plate for Multicam-13

0353-12-22 - Top Panel for Multicam-13 w/o Support Holes

0353-12-23 - Top Panel for Multicam-13 with Support Holes

0353-12-29 - Sensor Front End, CS-mount

0353-12-30 - Sensor Adjustment Plate

0353-12-36 - Protection head body

0353-12-37 - Top cover

0353-12-38 - Lens shade

0353-12-3801 - Shade top flange
0353-12-3802 - Shade outer shell
0353-12-3803 - Shade bottom flange
0353-12-3804 - Shade fin

0353-12-39 - Top shade


0353-13 - back panels

0353-13-01 - Back Panel, only network (RJ45) connector

0353-13-02 - Back Panel, with holes for network, SATA and USB connectors

0353-13-03 - Back Panel, Sealed, Aluminum, Black Anodize

0353-13-10 - Back Panel for Multicam-13, Aluminum, Black Anodize

0353-13-11 - Back Panel for Multicam-13, Aluminum, Black Anodize

0353-13-12 - Connector Panel

0353-13-13 - Fan Mounting Plate

0353-13-14 - Connector Panel

0353-13-15 - Manifold

0353-13-16 - Manifold cover



0353-17 - decals/overlays

0353-17-01 - back panel overlay, network only

0353-17-02 - back panel overlay for 10369A (RJ45, SATA, USB)

0353-17-03 - bottom overlay


0353-17-04 - Camera Case overlay - small


0353-17-05 - Camera Case overlay - large



0353-18 - parts external other

0353-18-01 - tripod mount, 1/4-20 thread

0353-18-02 - connector cover

0353-18-03 - Enclosure for the 1.8" HDD, bottom

0353-18-04 - Enclosure for the 1.8" HDD, top

0353-18-05 - 5mm C mount adapter ring

0353-18-06 - C mount cap

0353-18-07 - Stereo crossbar door cover

0353-18-08 - Tripod Mount, Inner

0353-18-09 - Tripod Mount, Outer

0353-18-10 - Mount Band

0353-18-11 - Fisheye Lens Side Cover

0353-18-12 - Plug, Black Plastic

0353-18-13 - Plate, Holding

0353-18-14 - Half flange

0353-18-15 - Switchbox bracket

0353-18-18 - Latch base

0353-18-19 - Latch lever

0353-18-20 - Latch arm

0353-18-21 - Hinge, lid part

0353-18-22 - Hinge, bottom part



0353-19 - parts internal other

0353-19-01 - CF support

0353-19-02 - CF support

0353-19-03 - OS5000 support

0353-19-04 - PCB Support, Aluminum

0353-19-05 - Fan Adapter, Aluminum

0353-19-06 - Support Rod, Aluminum

0353-19-07 - Fan Duct, Aluminum

0353-19-08 - Ring, Cut, Aluminum

0353-19-10 - RJF22B00 Connector shell

0353-19-11 - Window Ring, Inner

0353-19-12 - Window Ring, Outer

0353-19-13 - PCB Mount

0353-19-14 - Center Camera Mount Plate

0353-19-16 - Support Rod

0353-19-17 - Multi-camera PCB Mount

0353-19-21 - Pano Head Internal Body

0353-19-22 - Pano Head Internal Body, Top

0353-19-23 - Duct

0353-19-23 - Air Duct

0353-19-24 - Sensor Focus/Tilt Adjustment Module, Base

0353-19-25 - Sensor Focus/Tilt Adjustment Module, Arms

0353-19-26 - Focus/Tilt Adjustment Arm

0353-19-27 - Pano Head Internal Body

0353-19-28 - Pano Head Internal Body, Top

0353-19-31 - Rail, left

0353-19-32 - Rail, right

0353-19-33 - Bracket for HDD rails

0353-19-34 - Bracket, limiting

0353-19-35 - Bracket, switch

0353-19-36 - Insert, hinge mount

0353-19-37 - Insert, Latch mount

0353-19-38 - Spacer

0353-19-39 - Spacer

0353-19-40 - Plate, mounting

0353-19-41 - Coupler


0353-19-42 - SFE Module, Base


0353-20 - custom mounting parts

0353-20-01 - standoff, M2/M2.5, 14.5mm high, DIA 4.5mm

0353-20-02 - Spacer, OD=5mm, ID=2.7mm, l=15mm

0353-20-03 - standoff, M2/M2.5, 8.5mm high, DIA 4.5mm

0353-20-04 - Spacer for tripod mount


0353-24 - other Eyesis4pi parts

0353-24-01 Allen key guide

0353-24-02 Cable holder

0353-24-03 SATA/eSATA adapter PCB holder, Rev. A

0353-24-04 Cable clamp

0353-24-06 Enclosure body

0353-24-07 Connector panel

0353-24-08 Plug core

0353-24-09 Plug plunger

0353-24-10 Plug nut

0353-24-11 Plug cap

0353-24-12 Enclosure flange


0353-27 - parts internal other

0353-27-01 - SATA multiplexer heat sink rail, aluminum

0353-27-02 - SATA multiplexer heat sink, aluminum



0353-30 - insulator tubing, spacers, tapes

0353-30-01 - insulator tubing, l=12.5mm , ID=4.5MM (heat shrink OK)

0353-30-02 - Flex cable holder for the HDD

0353-30-03 - Silicone Ring, OD=59mm, ID=54mm, t=4.5mm

0353-30-04 - O-ring, Silicone, OD=2 3/8", ID=2 1/8"

0353-30-06 - O-ring, OD=40mm, ID=37mm

0353-30-07 - O-ring, OD=61mm, ID=58mm

0353-30-08 - O-ring

0353-30-09 - O-ring

0353-30-10 - O-ring

0353-30-11 - O-ring

0353-30-12 - O-ring

0353-30-13 - O-ring

0353-30-14 - O-ring

0353-30-20 - Sensor Board Spacer

0353-30-21 - Sensor Foam Gasket

0353-30-24 - Silicone Gasket for M40.5 filter

0353-30-25 - Silicone Gasket for M72 filter



0353-40 - Tools and Fixtures

0353-40-01 - Focus motors mounting plate

0353-40-02 - Shaft

0353-40-03 - Hex Shaft, l=9mm

0353-40-04 - Hex Shaft, l=14mm

0353-40-10 - Filter Insertion/removal tool, M40.5x0.5

0353-40-11 - Filter Insertion/removal tool, M72x0.5


0353-48 - Standard Tools

0353-48-01 - Ball-Point Hex L-Key 1.5 mm

0353-48-02 - Ball-Point Hex L-Key 2 mm

0353-48-03 - High-Visibility L-Key Long Arm 1.5 mm

0353-48-04 - High-Visibility L-Key Long Arm 2 mm

0353-48-05- L-Key Long Arm 0.9 mm

0353-48-06- L-Key Short Arm 0.9 mm

0353-48-07- L-Key Short Arm 1.3 mm

0353-48-08- L-Key Short Arm 2 mm

0353-60 - custom extruded profiles

0353-60-01 - aluminum extrusion for camera bottoms

0353-60-02 - aluminum extrusion for camera tops

0353-60-03 - aluminum extrusion for camera tops/bottoms (49x43.5)


0353-61 - packaging cases

0353-61-01 - SKB case for NC353L

0353-61-02 - SKB case for Stereo Camera

0353-61-03 - SKB case for Eyesis


0353-62 - Foam for packaging cases -custom cut

0353-62-01 - Foam Bottom for SKB case - NC353L

0353-62-02 - Foam for SKB case - Stereo Camera

0353-62-03 - Foam for SKB case - Eyesis

0353-62-04 - Foam Top for SKB case - NC353L


0353-70 - optical components

0353-70-01 - IR cutoff filter, DIA 20.0mm, t=0.3mm

0353-70-10 - Protective Window, OD=59mm,t=3mm

0353-70-20 - 5mm CS-mount to C-mount Adapter Ring

0353-70-21 - C-Mount to M12 Lens Adapter w/Oring

0353-70-22 - Lens thread adapter: M12x0.5 to C- or CS- mount, aluminum

0353-70-25 - Lens Cap, universal, plastic

0353-70-32 - UV filter, 37mm

0353-70-34 - UV filter, 52mm

0353-70-35 - UV filter, 58mm

0353-70-36 - UV protective filter, M40.5x0.5

0353-70-38 - UV protective filter, M72x0.75

0353-70-41 - Fujinon HF16SA-1 f=16mm Megapixel Lens

0353-70-42 - Kowa LM3NCM f=3.5mm Lens

0353-70-43 - Fujinon fe185c057ha1 Fisheye Lens

0353-70-44 - Computar Varifocal Lens H2Z0414C-MP 4-8mm F1.4 Manual Iris Vari-Focal C-Mount, 3 MPix

0353-70-45 - Fujinon fe12.5SA-1 12.5mm F1.4 C-Mount

0353-70-46 - Lens, M12

0353-70-47 - Lens, M12

0353-70-48 - Lens, M12, f=4.5mm

0353-70-49 - Lens, f=4.5mm M12

0353-70-50 - Lens, f=5.0mm, C-mount

0353-70-51 - Lens, f=5.0mm, M12

0353-70-53 - Lens, M12, f=2.0mm




0353-80 - other standard parts

0353-82 - rivets

0353-82-01 - Rivet, Mandrel

0353-83 - springs

0353-83-01 - Compression spring

0353-83-02 - Compression spring

0353-83-10 - Spring loaded catch

0353-84 - pins

0353-84-01 - Dowel pin

0353-85 - threaded spacers for other than M2 and M2.5

0353-86 - threaded spacers for M2.5

0353-87 - threaded spacers for M2

0353-88 - unthreaded spacers for other than M2 and M2.5

0353-88-41 - Unthreaded spacer for M5, l=3mm

0353-89 - unthreaded spacers for M2.5

0353-90 - unthreaded spacers for M2

0353-90-01 - spacer, l=4mm

0353-90-02 - spacer, l=6mm

0353-90-03 - spacer, l=4.8mm

0353-91 - nuts for other than M2 and M2.5

0353-91-11 M3 Hex Nut

0353-91-90 Slotted spanner nut, M30x1.5, DIN1804W

0353-92 - nuts for M2.5

0353-93 - nuts for M2

0353-93-01 M2 Hex Nut



0353-94 - washers for other than M2 and M2.5

0353-94-11 - Washer for M3

0353-94-41 - Washer for M4, plastic

0353-94-42 - Washer for M4

0353-94-61 - Washer, plastic

0353-95 - washers for M2.5

0353-96 - washers for M2

0353-96-01 - Washer for M2, Stainless Steel 316, OD=5mm, ID=2.2mm, t=-0.3mm



0353-97 - Screws other than M2 and M2.5

0353-97-01 - Screw, Button cap, Stainless Steel 18-8, #4-40, 0.19"long

0353-97-02 - Screw, Button cap, Stainless Steel 18-8, #4-40, 1/8"long

0353-97-03 - Screw flat #4-40, Philips

0353-97-10 - Screw M3, Flat, Socket Cap, Steel, Black, l=8mm

0353-97-12 - Screw M3, socket head, l=10mm

0353-97-13 - Set Screw M3 x 6mm With Nylon tip

0353-97-14 - Screw M3,Socket Cap, l=6mm

0353-97-15 - Screw Shoulder M3, l=4mm, D=4mm

0353-97-16 - Screw Shoulder M3, l=5mm, D=4mm

0353-97-17 - Screw Shoulder M3, l=8mm, D=4mm

0353-97-20 - Screw, M1.6, Socket Cap, Steel, Black, l=6mm

0353-97-26 - Screw, M1.6, Socket Cap, Steel, Black, l=3mm

0353-97-30 - Screw, M5, Socket Cap, l=10mm

0353-97-31 - Screw, M5, Socket Cap, l=16mm

0353-97-32 - Screw M5, socket head, l=8mm

0353-97-34 - Screw M5, socket head, l=6mm

0353-97-40 - Screw, M4, Socket Cap, l=16mm

0353-97-42 - Screw Shoulder M5, l=20mm, D=6mm

0353-97-43 - Screw Shoulder M5, l=45mm, D=6mm

0353-97-50 - Screw, M6, Socket Cap, l=16mm

0353-97-61 - Screw M8 modified - REDUCED HEAD SIZE



0353-98 - Screws, Metric, M2.5

0353-98-01 - Screw, M2.5, Socket cap, Black anodized, l=6mm

0353-98-02 - Screw, M2.5, Flat Socket Cap, Stainless steel, l=6mm

0353-98-03 - Screw, M2.5, Flat Socket Cap, Stainless steel, l=12mm

0353-98-05 - Screw, M2.5, Flat Socket Cap, Steel, Black, l=8mm

0353-98-06 - Screw, M2.5, Button Head Socket Cap, Steel, Black, l=4mm

0353-98-07 - Screw, M2.5, Socket Cap, Stainless steel 18-8, l=6mm

0353-98-08 - Screw, M2.5, Socket Cap, Stainless steel 18-8, l=8mm

0353-98-09 - Screw, M2.5, Socket Cap, Black Oxide, l=12mm

0353-98-10 - Set Screw, M2.5, Socket Cap, Stainless Steel 18-8, l=6mm

0353-98-11 - Screw, M2.5, Socket cap, Stainless Steel 18-8, l=12mm

0353-98-12 - Screw, M2.5, Socket cap, Stainless Steel 18-8, l=16mm

0353-98-13 - Screw, M2.5, Socket Cap, Black Oxide, l=8mm



0353-99 - Screws, metric, M2

0353-99-01 - Screw, M2, Socket cap, Black anodized, l=6mm

0353-99-02 - Screw, M2, Socket cap, Stainless steel 316, l=10mm

0353-99-03 - Screw, M2, Socket cap, Stainless steel 316, l=12mm

0353-99-04 - Screw, M2, Flat Socket Cap, Stainless steel 18-8, l=4mm

0353-99-05 - Screw, M2, Flat Socket Cap, Stainless steel 18-8, l=8mm

0353-99-06 - Screw, M2, Flat Socket Cap, Steel, Black, l=4mm

0353-99-10 - Screw, M2, Button Head Socket Cap, Steel, Black, l=3mm

0353-99-11 - Set Screw, M2, Socket Cap, Stainless Steel 18-8, l=4mm

0353-99-12 - Set Screw, M2, Socket Cap, Stainless Steel 18-8, l=6mm

0353-99-13 - Set Screw, M2, Socket Cap, Stainless Steel 18-8, l=12mm

0353-99-15 - Screw, M2, Button Head Socket Cap, Steel, Black, l=4mm

0353-99-16 - Screw, M2, Hex Socket Cap, Steel, Black, l=4mm

0353-99-17 - Screw M2, Flat, Socket, Stainless steel 18-8, l=10mm

0353-99-18 - Screw, M2, Socket Head, Stainless steel 18-8, l=16mm

0353-99-19 - Screw, M2, Socket Head, Stainless steel 18-8, l=14mm

0353-99-20 - Screw, M2, Socket Head, Stainless steel 18-8, l=6mm