Difference between revisions of "Elphel camera parts 0393-27"

From ElphelWiki
Jump to: navigation, search
(Created page with "Elphel NC393 series camera parts")
 
Line 1: Line 1:
 
[[Elphel_camera_parts_0393|Elphel NC393 series camera parts]]
 
[[Elphel_camera_parts_0393|Elphel NC393 series camera parts]]
 +
 +
All parts on this page were prepared for 3D printing. Some of them have support elements manually place in most critical parts, so you do not need to enable support elements in your slicer software. All those elements can be easily removed after printing. We used Ultimaker2 with 0.4 mm nozzle for 3D printing all of these parts and achieved good results with 0.7 mm wall thickness and 20% infill density. We posted some examples of 3D printed parts on [http://blog.elphel.com/2016/05/3d-print-your-camera-freedom/ our blog]
 +
 +
One of the parts below, 0393-27-07, is a helper object. It was specifically created for cutting out of SFE mount place in custom designs.
 +
 +
=== 0393-27-01f - C/CS SFE adapter ===
 +
{{Cad4c|0393-27-01f}}
 +
----
 +
=== 0393-27-02d - Adapter for camera body ===
 +
{{Cad4c|0393-27-02d}}
 +
----
 +
=== 0393-27-03c - Support frame adapter ===
 +
{{Cad4c|0393-27-03c}}
 +
----
 +
=== 0393-27-04 - Cable strain relief for 0393-27-03c ===
 +
{{Cad4c|0393-27-04}}
 +
----
 +
=== 0393-27-05 - Cable strain relief for 0393-27-01f ===
 +
{{Cad4c|0393-27-05}}
 +
----
 +
=== 0393-27-06 - Cable strain relief for 0393-27-03c ===
 +
{{Cad4c|0393-27-06}}
 +
----
 +
=== 0393-27-07 - SFE cutout part ===
 +
{{Cad4c|0393-27-07}}
 +
----
 +
=== 0393-27-08a - SFE adapter ===
 +
{{Cad4c|0393-27-08a}}
 +
----
 +
=== 0393-27-09 - SFE adapter ===
 +
{{Cad4c|0393-27-09}}
 +
----
 +
=== 0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d ===
 +
{{Cad4c|0393-27-10}}
 +
----

Revision as of 16:34, 11 May 2016

Elphel NC393 series camera parts

All parts on this page were prepared for 3D printing. Some of them have support elements manually place in most critical parts, so you do not need to enable support elements in your slicer software. All those elements can be easily removed after printing. We used Ultimaker2 with 0.4 mm nozzle for 3D printing all of these parts and achieved good results with 0.7 mm wall thickness and 20% infill density. We posted some examples of 3D printed parts on our blog

One of the parts below, 0393-27-07, is a helper object. It was specifically created for cutting out of SFE mount place in custom designs.

0393-27-01f - C/CS SFE adapter

0393-27-01f_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [1], GNU FDL v.1.3

 



0393-27-02d - Adapter for camera body

0393-27-02d_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [2], GNU FDL v.1.3

 



0393-27-03c - Support frame adapter

0393-27-03c_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [3], GNU FDL v.1.3

 



0393-27-04 - Cable strain relief for 0393-27-03c

0393-27-04_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [4], GNU FDL v.1.3

 



0393-27-05 - Cable strain relief for 0393-27-01f

0393-27-05_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [5], GNU FDL v.1.3

 



0393-27-06 - Cable strain relief for 0393-27-03c

0393-27-06_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [6], GNU FDL v.1.3

 



0393-27-07 - SFE cutout part

0393-27-07_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [7], GNU FDL v.1.3

 



0393-27-08a - SFE adapter

0393-27-08a_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [8], GNU FDL v.1.3

 



0393-27-09 - SFE adapter

0393-27-09_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [9], GNU FDL v.1.3

 



0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d

0393-27-10_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2020 Elphel Inc., Licensed under [10], GNU FDL v.1.3