Elphel camera parts 0393-27

From ElphelWiki
Revision as of 17:31, 17 November 2018 by Andrey.filippov (talk | contribs) (0393-27-16 - Calibration SFE housing)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Elphel NC393 series camera parts

All parts on this page were prepared for 3D printing. Some of them have support elements manually place in most critical parts, so you do not need to enable support elements in your slicer software. All those elements can be easily removed after printing. We used Ultimaker2 with 0.4 mm nozzle for 3D printing all of these parts and achieved good results with 0.7 mm wall thickness and 20% infill density. We posted some examples of 3D printed parts on our blog

One of the parts below, 0393-27-07, is a helper object. It was specifically created for cutting out of SFE mount place in custom designs.

0393-27-01f - C/CS SFE adapter

0393-27-01f_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [1], GNU FDL v.1.3

 



0393-27-02d - Adapter for camera body

0393-27-02d_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [2], GNU FDL v.1.3

 



0393-27-03c - Support frame adapter

0393-27-03c_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [3], GNU FDL v.1.3

 



0393-27-04 - Cable strain relief for 0393-27-02d, 0393-27-2e

0393-27-04_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [4], GNU FDL v.1.3

 



0393-27-05 - Cable strain relief for 0393-27-01f

0393-27-05_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [5], GNU FDL v.1.3

 



0393-27-06 - Cable strain relief for 0393-27-03c

0393-27-06_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [6], GNU FDL v.1.3

 



0393-27-07 - SFE cutout part

0393-27-07_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [7], GNU FDL v.1.3

 



0393-27-08a - SFE adapter

0393-27-08a_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [8], GNU FDL v.1.3

 



0393-27-09 - SFE adapter

0393-27-09_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [9], GNU FDL v.1.3

 



0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d

0393-27-10_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [10], GNU FDL v.1.3

 



0393-27-12 - SFE support platform for press fit kit

This platform facilitates disk springs support pins installation into SFEs.

0393-27-12_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [11], GNU FDL v.1.3

 



0393-27-13 - Tube cap

0393-27-13_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [12], GNU FDL v.1.3

 



0393-27-14 - Mount band

This band is used to mount additional parts on top of NC393 camera. One of the possible parts is 0393-27-15 for IMU mount.

0393-27-14_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [13], GNU FDL v.1.3

 



0393-27-15 - IMU support plate

This plate is used in combination with 0393-27-14.

0393-27-15_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [14], GNU FDL v.1.3

 



0393-27-16 - Calibrated SFE housing

0393-27-16_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [15], GNU FDL v.1.3

 



0393-27-17 - Cable strain relief for calibration SFE housing

Used with 0393-27-16.

0393-27-17_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [16], GNU FDL v.1.3

 



0393-27-18 - Support frame adapter, short

0393-27-18_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [17], GNU FDL v.1.3

 



0393-27-19 - IMU+GPS support plate

0393-27-19_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [18], GNU FDL v.1.3

 



0393-27-20 - IMU+GPS enclosure

0393-27-20_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [19], GNU FDL v.1.3

 



0393-27-21 - Back panel extender for SSD rack

0393-27-21_resized.jpeg

webx3dicon.png
3d (stl)   3d (step)  
2d (dxf)   2d (pdf)  

Copyright © 2019 Elphel Inc., Licensed under [20], GNU FDL v.1.3