Eyesis4Pi Footage Procedures page

From ElphelWiki
Revision as of 14:15, 29 August 2012 by Oleg (talk | contribs)
Jump to: navigation, search



Post-processing WebGUI (ImageJ not included)

Footage procedures WebGUI

Step 1

Step 1

  • Processing folder-input
A folder at "/data/footage" with the acquired images in the indexed subfolders.
  • Filter Out Images with Non-Matching Timestamps-button
Filters out uncomplete panoramas (missing files).
  • Generate KML-button
Creates a KML file (map_points.kml in the Processing folder) for Eyesis Panorama Previewer.



Step 2

Step 2

Manual launch instructions (subject to changes soon)

  • Launch ImageJ -> Plugins -> Compile & Run. Find and select EyesisCorrections.java.
Eyesis corrections plugin interface
  • Restore button -> browse for default.corr-xml.
  • Configure correction button - make sure that the following paths are set correctly:

Source files directory                - directory with the footage images
Sensor calibration directory          - [YOUR-PATH]/sensor_calibration_files
Aberration kernels (sharp) directory  - [YOUR-PATH]/kernels/sharp
Aberration kernels (smooth) directory - [YOUR-PATH]/kernels/smooth
Equirectangular maps directory(may be empty) - [YOUR-PATH]/kernels/eqr (it should be created automatically if the w/r rights of [YOUR-PATH]/kernels allow)
  • Configure warping -> rebuild map files - this will create maps in [YOUR-PATH]/kernels/eqr. Will take ~5-10 minutes.
  • Select source files -> select all the footage files to be processed.
  • Process files to start the processing. Depending on the PC power can take ~30 minutes for a panorama of 19 images.



Step 3

Step 3
  • Processing root folder-input
A root folder for post-processing - absolute path
  • Sources subfolder-input
A folder with the JP4 source images in the Processing root folder - the sources are used for GPS data extraction.
  • ImageJ-processed subfolder-input
A folder with the ImageJ plugin post-processing results to be stitched.
  • Stitch-button
Launches "enblend" from a stitch.php script for all panoramas in ImageJ-processed subfolder:
 enblend -l 10 --no-optimize --fine-mask -a -v -w -o result.tif 1334546768_780764-*_EQR.tiff 1334546768_780764-*_EQR-*.tiff
  • Split images for WebGL Editor
Cuts stitched panoramas into 8 pieces for the WebGL Editor.
Tiles for the WebGL Editor
  • Compress images for Google Earth-button
Creates rescaled low resolution panoramas - so the KML file could be opened from Google Earth.
  • Generate KML for the WebGL Editor-button
Scans all the source images in the Sources subfolder and creates a KML file with the GPS data. The file is saved into the Processing root folder
  • Path prefix inside KML-input
Adds this prefix to the file name to make the final http link.
  • Visibility-input
Tag inside the KML telling the Editor whether to show the panorama as a camera model ("1") or not ("0"). Use "1".
  • Starting Index-input
KML records names.