Difference between revisions of "Eyesis4Pi workflow"

From ElphelWiki
Jump to: navigation, search
m
Line 8: Line 8:
 
* [http://wiki.elphel.com/index.php?title=Eyesis_gui elphel-eyesis-gui] - camera GUI  
 
* [http://wiki.elphel.com/index.php?title=Eyesis_gui elphel-eyesis-gui] - camera GUI  
  
==Eyesis Output==
+
==EyesisPi Output==
 
* Each frame in a *.mov file is a combination of frames from 3 sensors glued vertically - triplet.
 
* Each frame in a *.mov file is a combination of frames from 3 sensors glued vertically - triplet.
 
* The modules are numbered - 1..8 - having individual ip address:
 
* The modules are numbered - 1..8 - having individual ip address:

Revision as of 14:29, 26 March 2012

Preface

The following page describes the Eyesis4Pi camera software and post-processing procedures.

Elphel-Eyesis4Pi GUI (recording)

Elpehl-Eyesis GUI (PHP+JavaScript+HTML) is installed on the laptop and used for controlling the Eyesis camera.

EyesisPi Output

  • Each frame in a *.mov file is a combination of frames from 3 sensors glued vertically - triplet.
  • The modules are numbered - 1..8 - having individual ip address:
192.168.0.221-228
  • 192.168.0.221 - master camera, sends sync signals to others.
  • The frames in *.movs are indexed.
  • A single image format is JP4 (a raw format with a higher quality and frame rate than *.jpeg).
  • Corresponding frames have the same time stamps generated by the master camera.
  • The master camera frames are geotagged.
  • The IMU log is stored on 1 of the 2 Compact Flash cards (non-removable) attached to the master camera.

Post Processing Software

Elphel Eyesis4Pi SDK software (pre-installed), for post-processing:

sudo apt-get install apache2 php5 ufraw dcraw libjpeg-progs imagemagick hugin
  • Apache web server + php
  • Movie2DNG - extracting JP4 (JP4 is the Elphel raw image format) images from *.MOVs.
  • ImageJ (by 3rd party) - ImageJ with Elphel plugins (image quality enhancement, aberration correction, color balance, stitching) for processing JP4s to create TIFF/JPEG output;
  • ImageMagick # (by 3rd party), also with a PHP scrip by Elphel is used for converting/modifying panorama JPEGs - scaling for WebGL panorama viewer/editor;
  1. other pre-installed PHP scripts:
    • exif2kml.php - extract the GPS data from images and put it all to a KML file of the route.
    • create_links_xml_file.php - read the KML file and create file with records-links of the route points. It is used in Elphel WebGL Viewer

Other:

  • Ufraw (by 3rd party) - to view/process DNG/TIFF
  • Dcraw (by 3rd party) - for converting JPEGs
  • cjpeg
Verify installation

In a terminal window type & enter commands ("command not found" == not installed):

movie2dng 
convert 
nona
enblend 
cjpeg --help
dcraw

Post processing workflow

  • Copy all the *.mov files to certain locations (folders must have the r/w rights enabled for everyone):
Currently:
hdd1: /data/disk-1/<footage_name>/
...
hdd8: /data/disk-8/<footage_name>/

All the php scripts are launched from a single page:

  • http://127.0.0.1/scripts/split_mov.php?dir=<footage_name> - (usage TBA) - it applies Movie2DNG to all the footage files. The output is JP4 files.
  • http://127.0.0.1/scripts/exif2kml.php?dir=<footage_name> - it extracts the GPS data from images and puts it all to a KML file of the route. The output is a KML file.
  • Launch ImageJ and process the files. The output are enhanced, stitched JPEGs (optionally TIFFs).
  • http://127.0.0.1/scripts/convert_images_for_webgl.php?dir=<results_dir> - rescale results using ImageMagick.