Difference between revisions of "Eyesis gui"
From ElphelWiki
| Line 1: | Line 1: | ||
| − | + | =About= | |
Eyesis GUI allows to: | Eyesis GUI allows to: | ||
* change sensors' settings | * change sensors' settings | ||
| Line 6: | Line 6: | ||
* check images and monitor sub-units status information | * check images and monitor sub-units status information | ||
| − | + | = Download & Install= | |
==== Ubuntu Linux ==== | ==== Ubuntu Linux ==== | ||
| Line 33: | Line 33: | ||
* Unpack the archive (should get "jquery-ui-1.8.4.custom/") | * Unpack the archive (should get "jquery-ui-1.8.4.custom/") | ||
| − | + | = User Guide = | |
| − | === | + | ==<font color=blue><b>1. GUI page</b></font>== |
| − | + | http://127.0.0.1/eyesis.html | |
| − | === | + | ==<font color=blue><b>2. Quick Start</b></font>== |
''Note: There is a program called '''camogm''' for recording running on all 3 sub-cameras. Once the GUI page is accessed or refreshed a launch request is issued - it can take some time (~20-30sec)''. | ''Note: There is a program called '''camogm''' for recording running on all 3 sub-cameras. Once the GUI page is accessed or refreshed a launch request is issued - it can take some time (~20-30sec)''. | ||
* Set the IPs (correct ips are 192.168.0.xx1,192.168.0.xx2,192.168.0.xx3). Other parameters can be left default - access the GUI page. After camogms are started the "Camogm Status" will indicate that. | * Set the IPs (correct ips are 192.168.0.xx1,192.168.0.xx2,192.168.0.xx3). Other parameters can be left default - access the GUI page. After camogms are started the "Camogm Status" will indicate that. | ||
| Line 49: | Line 49: | ||
* Go to the '''Camera''' tab and press the '''Enable JP4''' button. | * Go to the '''Camera''' tab and press the '''Enable JP4''' button. | ||
* <font color=red>'''RECORD'''</font> | * <font color=red>'''RECORD'''</font> | ||
| + | * Check camogm logs from time to time. | ||
| − | + | ==<font color=blue><b>3. Tabs</b></font>== | |
| − | |||
=====Network===== | =====Network===== | ||
* Assign the correct IPs (currently works only in 192.168.0.x subnetwork + the correct IPs are 192.168.0.xx1,192.168.0.xx2, 192.168.0.xx3) | * Assign the correct IPs (currently works only in 192.168.0.x subnetwork + the correct IPs are 192.168.0.xx1,192.168.0.xx2, 192.168.0.xx3) | ||
* Set refresh interval (status requests period) (can be left default) | * Set refresh interval (status requests period) (can be left default) | ||
=====Camogm===== | =====Camogm===== | ||
| + | * HDDs possible mount points are /var/0 - /var/7 | ||
| + | * '''Prefix''' should be set to /var/0/ - /var/7/ (slash at the end is important). If the partition is less than 250GB an auto incrementing prefix change will be made. | ||
| + | * '''Split size''', '''Split interval''' & '''Max frames''' - describe *.mov file. Whatever condition comes first it will result in a start of a new file. | ||
| + | |||
=====Camera===== | =====Camera===== | ||
=====Quality===== | =====Quality===== | ||
| Line 61: | Line 65: | ||
| − | === | + | ==<font color=blue><b>4. Status</b></font>== |
* Normally during the recording the buffers are not filled more than a half when the camogm state is "running". For "stopped" & "starting" the buffers can be filled arbitrarily. | * Normally during the recording the buffers are not filled more than a half when the camogm state is "running". For "stopped" & "starting" the buffers can be filled arbitrarily. | ||
* "Camogm last error code" = 5 - a frame wasn't written on the HDD in time. Although the recording will not be stopped - it is better to stop/start it. | * "Camogm last error code" = 5 - a frame wasn't written on the HDD in time. Although the recording will not be stopped - it is better to stop/start it. | ||
| + | * Check logs from time to time. | ||
| − | + | = Links = | |
Revision as of 13:48, 24 August 2010
Contents
About
Eyesis GUI allows to:
- change sensors' settings
- change compression quality
- start/stop recording
- check images and monitor sub-units status information
Download & Install
Ubuntu Linux
Package name: elphel-eyesis-gui
Dependencies: apache2, php5
There is a prebuilt package for Ubuntu users at elphel-eyesis-gui PPA.
To install it, use the following commands, see help for more information.
sudo add-apt-repository ppa:andersonnotgood/elphel sudo apt-get update sudo apt-get install elphel-eyesis-gui
Other platforms
- Get the sources from http://elphel.cvs.sourceforge.net/viewvc/elphel/eyesis353/elphel-eyesis-gui/
- Copy to you web server folder the following files:
eyesis.html, eyesis.js, camogmgui_multiple.php jquery-ui-1.8.4.custom.tar.gz
- Unpack the archive (should get "jquery-ui-1.8.4.custom/")
User Guide
1. GUI page
2. Quick Start
Note: There is a program called camogm for recording running on all 3 sub-cameras. Once the GUI page is accessed or refreshed a launch request is issued - it can take some time (~20-30sec).
- Set the IPs (correct ips are 192.168.0.xx1,192.168.0.xx2,192.168.0.xx3). Other parameters can be left default - access the GUI page. After camogms are started the "Camogm Status" will indicate that.
- Check the images
1. Go to the Other tab - switch on the Color bars pattern. 2. Press Get Previews button (it is ok if the images are cut from the bottom - it's the browser problem - just press the button again) 3. turn off the color pattern mode.
- Go to the Camera tab and press the Enable JP4 button.
- RECORD
- Check camogm logs from time to time.
3. Tabs
Network
- Assign the correct IPs (currently works only in 192.168.0.x subnetwork + the correct IPs are 192.168.0.xx1,192.168.0.xx2, 192.168.0.xx3)
- Set refresh interval (status requests period) (can be left default)
Camogm
- HDDs possible mount points are /var/0 - /var/7
- Prefix should be set to /var/0/ - /var/7/ (slash at the end is important). If the partition is less than 250GB an auto incrementing prefix change will be made.
- Split size, Split interval & Max frames - describe *.mov file. Whatever condition comes first it will result in a start of a new file.
Camera
Quality
Other
4. Status
- Normally during the recording the buffers are not filled more than a half when the camogm state is "running". For "stopped" & "starting" the buffers can be filled arbitrarily.
- "Camogm last error code" = 5 - a frame wasn't written on the HDD in time. Although the recording will not be stopped - it is better to stop/start it.
- Check logs from time to time.
