Difference between revisions of "Eyesis workflow"

From ElphelWiki
Jump to: navigation, search
Line 13: Line 13:
  
 
==Post-Processing Setup==
 
==Post-Processing Setup==
* HDDs are connected to a processing PC with SATA cables
+
* HDDs are put into a processing PC and the data is copied.
  
 
==Workflow==
 
==Workflow==

Revision as of 18:49, 30 November 2010

Preface

The following page describes the Eyesis camera post-processing procedures.

Camera Output

Fig.1 Eyesis frames
  • 3x 500GB HDDs (or 3x 256GB SSD HDDs), each containing *.mov files from 3x 3-sensor cameras (a single HDD is connected to a camera).
  • Each frame in a *.mov file is a combination of frames from 3 sensors glued vertically.
  • The cameras are numbered - 1,2,3. The sub images are [1.1, 1.2, 1.3], [2.1, 2.2, 2.3], [3.1, 3.2, 3.3]. 3.1 is the fisheye image.
  • The frames in *.movs are indexed.
  • Single frame format is JP4.
  • Corresponding frames have the same time stamps generated by the 1st camera.
  • The 1st camera frames are geotagged.

Post-Processing Setup

  • HDDs are put into a processing PC and the data is copied.

Workflow

1. Processing panorama

Stitching scripts samples.

  • JP4 images are extracted and converted to DNGs from *.MOVs by the program movie2dng.
  • Dcraw and the Hugin tools are used for stitching (a template *.pto for it should be created once).