Difference between revisions of "Ezynq"
From ElphelWiki
(Created page with "==Decription== [https://sourceforge.net/p/elphel/ezynq Ezynq] project is started to create a bootloader for systems based on the Xilinx Zynq SoC without the inconvenience of the ...") |
m |
||
| Line 10: | Line 10: | ||
==Install meta-toolchain (Ubuntu 13.04)== | ==Install meta-toolchain (Ubuntu 13.04)== | ||
* | * | ||
| + | <font size='2'> | ||
sudo apt-get install texinfo chrpath | sudo apt-get install texinfo chrpath | ||
git clone -b dylan git://git.yoctoproject.org/poky | git clone -b dylan git://git.yoctoproject.org/poky | ||
| Line 15: | Line 16: | ||
. ./oe-init-build-env | . ./oe-init-build-env | ||
bitbake meta-toolchain | bitbake meta-toolchain | ||
| + | </font> | ||
* Run installation script in ''build/tmp/deploy/'' | * Run installation script in ''build/tmp/deploy/'' | ||
==Install ezynq (Ubuntu 13.04)== | ==Install ezynq (Ubuntu 13.04)== | ||
| + | <font size='2'> | ||
git clone git://git.code.sf.net/p/elphel/ezynq ezynq | git clone git://git.code.sf.net/p/elphel/ezynq ezynq | ||
cd ezynq | cd ezynq | ||
./install_uboot.sh | ./install_uboot.sh | ||
| + | </font> | ||
==Generate bootable BOOT.BIN== | ==Generate bootable BOOT.BIN== | ||
* Edit ''initenv'' according to the built meta-toolchain | * Edit ''initenv'' according to the built meta-toolchain | ||
* | * | ||
| + | <font size='2'> | ||
cd u-boot-xlnx | cd u-boot-xlnx | ||
./makeuboot | ./makeuboot | ||
| + | </font> | ||
* The generated files are: | * The generated files are: | ||
| Line 43: | Line 49: | ||
include/configs/ezynq/zed_ezynq.h | include/configs/ezynq/zed_ezynq.h | ||
* | * | ||
| − | ./makeuboot | + | <font size='2'>./makeuboot</font> |
| − | <font color="red">''' | + | <font color="red">'''IMPORTANT:''' Only '''192KB''' of zynq's series on-chip memory are available at boot.</font> |
==Known issues== | ==Known issues== | ||
Revision as of 11:49, 4 October 2013
Contents
Decription
Ezynq project is started to create a bootloader for systems based on the Xilinx Zynq SoC without the inconvenience of the non-free tools and/or files. The goal is not just to "free" the code, but to provide users with the higher degree of flexibi- lity in fine-tuning of the configuration parameters.
Supported boards
Install meta-toolchain (Ubuntu 13.04)
sudo apt-get install texinfo chrpath git clone -b dylan git://git.yoctoproject.org/poky cd poky . ./oe-init-build-env bitbake meta-toolchain
- Run installation script in build/tmp/deploy/
Install ezynq (Ubuntu 13.04)
git clone git://git.code.sf.net/p/elphel/ezynq ezynq cd ezynq ./install_uboot.sh
Generate bootable BOOT.BIN
- Edit initenv according to the built meta-toolchain
cd u-boot-xlnx ./makeuboot
- The generated files are:
- boot.bin - the bootloader image
- u-boot.html - configuration settings overview
- u-boot.map - the bootloader's memory map
- u-boot - ELF file
Develop (add boards support)
- Add a new board record to the list in the boards.cfg (or leave as is if the item already exists).
- Create a configuration file for the new board - use include/configs/zynq_microzed.h as a reference
- Edit according to the board configuration the following files:
include/configs/ezynq/ezynq_MT41K256M16RE125.h include/configs/ezynq/ezynq_XC7Z010_1CLG400.h include/configs/ezynq/zed_ezynq.h
./makeuboot
IMPORTANT: Only 192KB of zynq's series on-chip memory are available at boot.
Known issues
- USB does not work yet.
- Ethernet is not tested (on the board we have it does not work with provided images, so we suspect a hardware problem.
- Bitstream loading is not tested, current code does not enable level shifters - it may be more appropriate to do just before loading of the bitstream.
