Difference between revisions of "Ezynq"

From ElphelWiki
Jump to: navigation, search
Line 35: Line 35:
<font size='2'>
<font size='2'>
  cd u-boot-xlnx
  cd u-boot-xlnx
  ./makeuboot {target}
  ./makeuboot <target>
Supported {targets}:
Supported <targets>:
  ./makeuboot zynq_microzed_config
  ./makeuboot zynq_microzed_config
  ./makeuboot zynq_zc706_config
  ./makeuboot zynq_zc706_config

Revision as of 16:15, 6 November 2013


Ezynq project is started to create a bootloader for systems based on the Xilinx Zynq SoC without the inconvenience of the non-free tools and/or files. The goal is not just to "free" the code, but to provide users with the higher degree of flexibility in fine-tuning of the configuration parameters.

Supported boards


  • boot.bin (fsbl is not required to boot)

Install meta-toolchain (Ubuntu 13.04)

sudo apt-get install texinfo chrpath
git clone -b dylan git://git.yoctoproject.org/poky
cd poky
. ./oe-init-build-env
bitbake meta-toolchain

  • Run installation script in build/tmp/deploy/

Install ezynq (Ubuntu 13.04)

git clone git://git.code.sf.net/p/elphel/ezynq ezynq
cd ezynq

Generate boot.bin

  • Edit initenv according to the built meta-toolchain

cd u-boot-xlnx
./makeuboot <target>

Supported <targets>:

./makeuboot zynq_microzed_config
./makeuboot zynq_zc706_config
./makeuboot elphel393_config
./makeuboot zynq_zed_config
  • The generated files are:
    • boot.bin - the bootloader image
    • u-boot.html - configuration settings overview
    • u-boot.map - the bootloader's memory map
    • u-boot - ELF file

Develop (add boards support)

  • Add a new board record to the list in the boards.cfg (or leave as is if the item already exists).
  • Create a configuration file for the new board - use include/configs/zynq_microzed.h as a reference
  • Edit (or create new for specific memory and chip) according to the board configuration the following files:

IMPORTANT: Only 192KB of zynq's series on-chip memory are available at boot. It is the maximal size of u-boot.bin (not the final boot.bin) - the python script will throw just a warning.

Known issues

  • [FIXED] (in Linux) USB does not work yet.
  • [FIXED] (in Linux) Ethernet is not tested (on the board we have it does not work with provided images, so we suspect a hardware problem. If no network:

ifconfig eth0 down
ifconfig eth0 up

  • Bitstream loading is not tested, current code does not enable level shifters - it may be more appropriate to do just before loading of the bitstream.
  • Write level training for DDR memory doesn't work in MicroZed and ZC706