Difference between revisions of "Fix network configuration"

Revision as of 14:29, 26 October 2018

Description

In the firmware 20180511 and older the ip address and network mask of the camera are applied from /etc/elphel393/init_elphel393.py script overriding /etc/network/interfaces, which appeared to have incorrect configuration.

In the newer firmware releases this functionality will be disabled to bring the network setup to a more traditional way, i.e. by modifying /etc/network/interfaces.

How to update network setup for 20180511 or older firmware

Quick instructions

• Camera is online. The ip address can be any, e.g., 192.168.0.9
• In a terminal window (linux os) type the following commnads:

wget https://community.elphel.com/files/393/fix_network_config/fix_net_config.tar.gz
tar -xzpf fix_net_config.tar.gz
cd fix_net_config
./host_script.sh 192.168.0.9

Description

From a Linux PC, download fix_net_config.tar.gz. The archive contains 2 scripts - one (shell) is run from the host PC, another (python) will be copied and automatically run on the camera. The python script will write the current configuration to /etc/network/interfaces and overwrite one of the init scripts to disable network configuration in /etc/elphel393/init_elphel393.py on startup.

fix_net_config.tar.gz
├── README.md         
├── host_script.sh               - run from host pc: copies fix_net_config.py and rootfs.tar.gz then runs fix_net_config.py
├── fix_net_config.py            - unpacks rootfs.tar.gz, replaces network configuration with the current one and copies all files to the root file system
└── rootfs.tar.gz                - archive with 2 files
    ├──etc/init.d/init_elphel393 - init script that disables network setup in /etc/elphel393/init_elphel393.py
    └──etc/network/interfaces    - network setup for eth0