Difference between revisions of "Live-CD remastering"

From ElphelWiki
Jump to: navigation, search
(Instruction)
(Instruction)
Line 37: Line 37:
 
6. The remastering script will be started. You must specify the work partition (for example hda1). This partition will be used for remastering Knoppix.
 
6. The remastering script will be started. You must specify the work partition (for example hda1). This partition will be used for remastering Knoppix.
  
[B]NOTE:[/B] This partition MUST be unmounted!
+
NOTE: This partition MUST be unmounted!
  
 
7. Follow printed instructions
 
7. Follow printed instructions

Revision as of 11:47, 8 March 2006

Knoppix Live-CD remastering

At present time this software is a beta-testing version.

Description

This software for CD remastering is include a lot of DEB-packages (elphel-specific and dependenced), files and scripts. All software is compressed to the .tar.bz2 archive (size approx. 52 Mb).

System Requirements

You must have:

1. at least 1 GB of FREE RAM+Swap total (e.g. 256M ram, and 750M swap AVAILABLE) (unless you use a different compression program - look in this page for compressloop)

2. 3 GB free on a Linux filesystem (ext2/3, xfs, etc.) formatted disk partition

3. Knoppix 4.0.2-2005-09-23 EN

Instruction

1. Download the LiveCD-1.4.3.tar.bz2 archive (placed at the Xeon computer in the /home/elphel/Ilya/Live-CD_remastering directory)

2. Boot from the Knoppix CD

3. Unpack archive to the /home/knoppix directory

4. Open a root shell:

Menu: Kmenu->Knoppix->Root Shell

5. Type the following two commands:

cd /home/knoppix/LiveCD-1.4.3

sh make.sh

6. The remastering script will be started. You must specify the work partition (for example hda1). This partition will be used for remastering Knoppix.

NOTE: This partition MUST be unmounted!

7. Follow printed instructions

8. The ELPHIX-1.4.3.ISO image will be placed at the work partition

9. Use the special software (for example, K3B) for writing image to CD