Poky manual

From ElphelWiki
Revision as of 15:08, 22 January 2016 by Oleg (talk | contribs) (Setup)
Jump to: navigation, search

Description

  • Building embedded Linux image for Zynq ARMv7 platform - Elphel 10393 board

About

  • Yocto Poky revision = 2.0
  • Host OS = Kubuntu 14.04.3 LTS x64

Required packages

Output files

Found in the poky's deploy directory: poky/build/tmp/deploy/images/

These names are listed as they appear in the u-boot configuration header file - actual output files have different names:

  • boot.bin+(u-boot-dtb.img) - u-boot as the first stage bootloader = Secondary Program Loader that boots u-boot-dtb.img

  • devicetree.dtb - device tree with described interfaces, zynq registers, interrupts and drivers
  • uImage - kernel, drivers
  • uramdisk.image.gz - applications

Copy them on the micro SD card (FAT partition) > run boot once in the u-boot command line.

Boot options

  • Auto unpacking the root file system image to RAM when booting:
    • Check u-boot default environment variables when building the bootloader.
    • Keep uramdisk.image.gz along with all the other files on the FAT partition of (micro)SD card.
  • Root file system on EXT2(EXT3,etc.) partition of (micro)SD card.


Setup

Copy the following lines to some_script.sh, modify and run:

#Part 1

git clone -b jethro git://git.yoctoproject.org/poky.git poky
cd poky; git checkout 83b72d8d1fdab2f7727083df59c00d9fa2324169
 
git clone -b jethro https://github.com/Elphel/meta-ezynq.git meta-ezynq
cd meta-ezynq; git checkout dd185f86155c3f9623e058d84f2fb3ddfae0b22c; cd ..

git clone -b jethro https://github.com/Elphel/meta-elphel393.git meta-elphel393
cd meta-elphel393; git checkout f6c78d1d837b83b3d51e1ac962dff435c38f8f0c; cd ..

git clone -b master https://github.com/Xilinx/meta-xilinx.git meta-xilinx
cd meta-xilinx; git checkout 989a6a12010247aebf137d8ad3f6a042da42640a; cd ..

#Part 2 : init environment and auto-fill Yocto's conf-files

CURRENT_PATH=$(dirname $(readlink -f "$0"))
. ./oe-init-build-env

BBLAYERS_CONF="conf/bblayers.conf"

echo "BBLAYERS = \" \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-yocto \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-yocto-bsp \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-ezynq \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-elphel393 \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-xilinx \\" >> $BBLAYERS_CONF
echo "  \"" >> $BBLAYERS_CONF

LOCAL_CONF="conf/local.conf"

# change the MACHINE
echo "MACHINE ?= \"elphel393\"" >> $LOCAL_CONF
# Elphel's MIRROR website, \n is important
echo "MIRRORS =+ \"http://.*/.*     http://mirror.elphel.com/elphel393_mirror/ \n \"" >> $LOCAL_CONF