Difference between revisions of "Request for Quote 1C"

From ElphelWiki
Jump to: navigation, search
 
(3 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
! Part !! QTY per Unit !! Qty Total !! Notes  
 
! Part !! QTY per Unit !! Qty Total !! Notes  
 
|-
 
|-
| [[Elphel_camera_parts_0353-10#0353-10-231D_-_Tube_Body_.28with_bottom_lens_openings_and_power_board_l.3D1067mm.29.2C_low_SFE_moved_up_10mm.2C_Rev_.22D.22|0353-10-231D - Tube Body (with bottom lens openings and power board l=1067mm), low SFE moved up 10mm, Rev "D" ]] || 1 || 6 || MAKE in USA
+
| [[Elphel_camera_parts_0353-10#0353-10-231D_-_Tube_Body_.28with_bottom_lens_openings_and_power_board_l.3D1067mm.29.2C_low_SFE_moved_up_10mm.2C_Rev_.22D.22|0353-10-231D - Tube Body (with bottom lens openings and power board l=1067mm), low SFE moved up 10mm, Rev "D" ]] || 1 || 6 ||  
 
|-
 
|-
| [[Elphel_camera_parts_0353-10#0353-10-24A_-_Tube_Body.2C_IMU_.28rev._.22A.22.29|0353-10-24A - Tube Body, IMU (rev. "A") ]]  || 1 || 6 || MAKE in USA
+
| [[Elphel_camera_parts_0353-10#0353-10-24A_-_Tube_Body.2C_IMU_.28rev._.22A.22.29|0353-10-24A - Tube Body, IMU (rev. "A") ]]  || 1 || 6 ||  
 
|-
 
|-
| [[Elphel_camera_parts_0353-10#0353-10-25_-_Tube_Body|0353-10-25 - Mount Tube]]  || 1 || 6 || MAKE in USA
+
| [[Elphel_camera_parts_0353-10#0353-10-25_-_Tube_Body|0353-10-25 - Mount Tube]]  || 1 || 6 ||  
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-11#0353-11-131A_-_GPS_cap.2C_bottom_ring.2C_Revision_.22A.22|0353-11-131A - Cap, bottom ring, Revision "A" ]]  || 1 || 6 ||
 
| [[Elphel_camera_parts_0353-11#0353-11-131A_-_GPS_cap.2C_bottom_ring.2C_Revision_.22A.22|0353-11-131A - Cap, bottom ring, Revision "A" ]]  || 1 || 6 ||
Line 31: Line 31:
 
| [[Elphel_camera_parts_0353-19#0353-19-17_-_Multi-camera PCB Mount, Aluminum|0353-19-17 - Multi-camera PCB Mount, Aluminum]]  || 9 || 55 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-17_-_Multi-camera PCB Mount, Aluminum|0353-19-17 - Multi-camera PCB Mount, Aluminum]]  || 9 || 55 ||
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-64D_-_SFE_Module.2C_Base.2C_Rev_.22D.22|0353-19-64D - SFE Module, Base, Rev "D" ]]  || 10 || 65 || PROVIDE SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-64D_-_SFE_Module.2C_Base.2C_Rev_.22D.22|0353-19-64D - SFE Module, Base, Rev "D" ]]  || 10 || 65 ||  
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-641D_-_SFE_Module.2C_Base.2C_with_shifted_lens_center.2C_Rev_.22D.22|0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D"  ]]  || 16 || 105 ||  PROVIDE SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-641D_-_SFE_Module.2C_Base.2C_with_shifted_lens_center.2C_Rev_.22D.22|0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D"  ]]  || 16 || 105 ||   
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-65F_-_SFE_Plate.2C_revision_.22F.22|0353-19-65F - SFE Plate, revision "F" ]]  || 26 || 170 ||  PROVIDE SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-65F_-_SFE_Plate.2C_revision_.22F.22|0353-19-65F - SFE Plate, revision "F" ]]  || 26 || 170 ||   
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-651B_-_Sensor_ring.2C_Revision_.22B.22|0353-19-651B - Sensor ring, Revision "B"  ]]  || 26 || 170 ||  PROVIDE SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-651B_-_Sensor_ring.2C_Revision_.22B.22|0353-19-651B - Sensor ring, Revision "B"  ]]  || 26 || 170 ||   
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-66C_-_Pano_head_external_body_top.2Fbottom_Rev_.22C.22|0353-19-66C - Pano head external body top/bottom Rev "C" ]]  || 2 || 12 ||  
 
| [[Elphel_camera_parts_0353-19#0353-19-66C_-_Pano_head_external_body_top.2Fbottom_Rev_.22C.22|0353-19-66C - Pano head external body top/bottom Rev "C" ]]  || 2 || 12 ||  
Line 59: Line 59:
 
| [[Elphel_camera_parts_0353-19#0353-19-733_-_Riser_board_support|0353-19-733 - Riser board support  ]]  || 2 || 12 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-733_-_Riser_board_support|0353-19-733 - Riser board support  ]]  || 2 || 12 ||
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-74B_-_PCB_Rail_Mount.2C_front_Revision_.22B.22|0353-19-74B - PCB Rail Mount, front Revision "B"]]  || 4 || 25 || Sharper corners in square holes!
+
| [[Elphel_camera_parts_0353-19#0353-19-74B_-_PCB_Rail_Mount.2C_front_Revision_.22B.22|0353-19-74B - PCB Rail Mount, front Revision "B"]]  || 4 || 25 ||  
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-742_-_Bottom_unit_connector_panel|0353-19-742 - Bottom unit connector panel ]]  || 1 || 6 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-742_-_Bottom_unit_connector_panel|0353-19-742 - Bottom unit connector panel ]]  || 1 || 6 ||
Line 95: Line 95:
 
| [[Elphel_camera_parts_0353-19#0353-19-89_-_Tube_Lock.2C_Top|0353-19-89 - Tube Lock]]  || 4 || 24 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-89_-_Tube_Lock.2C_Top|0353-19-89 - Tube Lock]]  || 4 || 24 ||
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-90_-_IMU_Mount.2C_Bottom|0353-19-90 - IMU Mount, Bottom]]  || 1 || 6 || Will be modified!
+
| [[Elphel_camera_parts_0353-19#0353-19-90_-_IMU_Mount.2C_Bottom|0353-19-90 - IMU Mount, Bottom]]  || 1 || 6 ||  
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-91_-_IMU_Mount.2C_Top|0353-19-91 - IMU Mount, Top]]  || 1 || 6 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-91_-_IMU_Mount.2C_Top|0353-19-91 - IMU Mount, Top]]  || 1 || 6 ||
Line 103: Line 103:
 
| [[Elphel_camera_parts_0353-19#0353-19-93_-_Bracket.2C_Fixating|0353-19-93 - Bracket Fixating]]  || 2 || 12 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-93_-_Bracket.2C_Fixating|0353-19-93 - Bracket Fixating]]  || 2 || 12 ||
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-94_-_Sensor_PCB_cover|0353-19-94 - Sensor PCB cover ]]  || 26 || 170 || PROVIDE SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-94_-_Sensor_PCB_cover|0353-19-94 - Sensor PCB cover ]]  || 26 || 170 ||  
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-95_-_Tube|0353-19-95 - Tube ]]  || 78 || 500 ||PROVIDE SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-95_-_Tube|0353-19-95 - Tube ]]  || 78 || 500 ||
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-97_-_Support_rod|00353-19-97 - Support rod  ]]  || 78 || 500 || PROVIDE SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-97_-_Support_rod|00353-19-97 - Support rod  ]]  || 78 || 500 ||  
 
|-
 
|-
| [[Elphel_camera_parts_0353-19#0353-19-98_-_Support_rod_cap|00353-19-98 - Support rod cap  ]]  || 78 || 500 || PROVIDE SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-98_-_Support_rod_cap|00353-19-98 - Support rod cap  ]]  || 78 || 500 ||  
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-99-18_-_Compensation_ring.2C_l.3D1.8mm|0353-19-99-18 - Compensation ring, l=1.8mm  ]]  || 26 || 170 ||  
 
| [[Elphel_camera_parts_0353-19#0353-19-99-18_-_Compensation_ring.2C_l.3D1.8mm|0353-19-99-18 - Compensation ring, l=1.8mm  ]]  || 26 || 170 ||  
Line 118: Line 118:
 
|}
 
|}
  
The Quote is requested for the Quantity needed for 3 Units (as listed in column "Qty Total")
+
The Quote is requested for the Quantity needed for 6 Units (as listed in column "Qty Total")
 
Please, read the [[Supplier_Terms_and_Conditions|Suppliers Terms and Conditions]] and send the Proposals by e-mail: [mailto://supplies@elphel.com supplies@elphel.com]
 
Please, read the [[Supplier_Terms_and_Conditions|Suppliers Terms and Conditions]] and send the Proposals by e-mail: [mailto://supplies@elphel.com supplies@elphel.com]

Latest revision as of 13:32, 12 March 2015

Elphel, Inc. invites the machine shops to Quote manufacturing of the following parts for the new Eyesis 4Pi camera:

Camera Metal Parts
Part QTY per Unit Qty Total Notes
0353-10-231D - Tube Body (with bottom lens openings and power board l=1067mm), low SFE moved up 10mm, Rev "D" 1 6
0353-10-24A - Tube Body, IMU (rev. "A") 1 6
0353-10-25 - Mount Tube 1 6
0353-11-131A - Cap, bottom ring, Revision "A" 1 6
0353-11-132A - GPS cap, top Revision "A" 1 6
0353-11-133A - GPS cap, middle ring, Rev. "A" 1 6
0353-12-401A - Shade fins, top/bottom, Revision "A" 16 100
0353-12-402A - Shade fins, middle 8 50
0353-12-403 - Shade fins, circular 4 25
0353-12-41 - Shade connector plate 16 100
0353-12-42B - Bottom SFE mount, Revision "B" 2 12
0353-19-02 - CF support 1 6
0353-19-17 - Multi-camera PCB Mount, Aluminum 9 55
0353-19-64D - SFE Module, Base, Rev "D" 10 65
0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D" 16 105
0353-19-65F - SFE Plate, revision "F" 26 170
0353-19-651B - Sensor ring, Revision "B" 26 170
0353-19-66C - Pano head external body top/bottom Rev "C" 2 12
0353-19-671 - Pano head internal body top/bottom, half 4 24 No thread in Dowel Pins Holes!
0353-19-68 - Spacer plate 1 6
0353-19-69 - Pano head external body, middle section 1 6
0353-19-70 - Pano head internal body middle, half 2 12 No thread in Dowel Pins Holes!
0353-19-71 - PCB Support 8 50
0353-19-72A - PCB Mount Rev. "A" 8 50
0353-19-73B - PCB Rail Mount, back, Revision "B" 6 38
0353-19-732 - PCB Rail Mount, back, top 1 6
0353-19-733 - Riser board support 2 12
0353-19-74B - PCB Rail Mount, front Revision "B" 4 25
0353-19-742 - Bottom unit connector panel 1 6
0353-19-743 - Cable holder 4 25
0353-19-744B - Cable support bracket, Revision "B" 2 12
0353-19-76 - SSD Rail Mount 11 70
0353-19-77 - FPC Holder 27 165
0353-19-771 - Cable clamp 6 25
0353-19-78 - FPC Holder, short 2 12
0353-19-791 - PCB support panel 1 6
0353-19-80A - Rail Support, Top, Revision "A" 1 6
0353-19-81 - Tube Body, Bottom 1 6
0353-19-82 - Tube Lock 1 6
0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm 2 12
0353-19-85 - Ring 1 6
0353-19-86 - Hose Connector, Network 1 6
0353-19-87 - Hose Connector, SATA 1 6
0353-19-88 - Tube Adapter 2 12
0353-19-89 - Tube Lock 4 24
0353-19-90 - IMU Mount, Bottom 1 6
0353-19-91 - IMU Mount, Top 1 6
0353-19-92 - Spacer, IMU Mount 4 24
0353-19-93 - Bracket Fixating 2 12
0353-19-94 - Sensor PCB cover 26 170
0353-19-95 - Tube 78 500
00353-19-97 - Support rod 78 500
00353-19-98 - Support rod cap 78 500
0353-19-99-18 - Compensation ring, l=1.8mm 26 170
0353-19-100 - Antenna plate 1 6

The Quote is requested for the Quantity needed for 6 Units (as listed in column "Qty Total") Please, read the Suppliers Terms and Conditions and send the Proposals by e-mail: supplies@elphel.com