Search results

== Update on 353/363 cameras == There is preliminary documentation for [[353|the new model 353/353 cameras hardware here]]

...as the Model 353 cameras). The sensor-related circuitry was split into two boards for the following reasons: * to reduce the overall footprint of the boards to simplify muti-sensor applications. Current stack width just slightly exc

...be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 [[Category: Boards 393]]

...not noticeable - vertical stripes with a 4-pixel period (only with 10338d boards) - [[10359_fix|FixGuide]]. ...board for [[10393|'''Elphel Model 393 Cameras''']] and [[353|Elphel Model 353/363 Cameras]]. For 10393, also see [[Using_10359_mux_with_10393|using 10359

== Elphel 353/363 series cameras and camera modules == * '''[[Software List|Software List (353)]]''' of software running on the camera

Now we have the the new [[Roadmap#Update_on_353.2F363_cameras|Model 353 camera]] tested and released to production - the camera that has a brand ne In the [[Roadmap#Update_on_353.2F363_cameras|Model 353 camera]] there is more memory (64MB system, 64 MB video buffer and 128MB fl

J4 for connect external boards. All wires of J4 connected to the solder pads. For make connection via wire J5 for connect external boards

* Use of EEPROM on sensor (10338 rev D) and multiplexor (10359A) boards - may be used to specify application type - this data is not erased during ...still some bug fixes and improvements that are applicable to regular model 353 cameras

...econfiguration (running camera_demo twice) the image gets darker even with 353+sensor ...he result of the different configuration. Running adapted camera_demo with 353+sensor gave md5=4ebe69ad27d260c27d667747c431dc96.

10369 interface board is an extension board for the [[353|Elphel 353/363 series cameras]]. ** Compact Flash (in "True IDE" mode) and IDE HDD ports (with adapter/riser boards: 103691, 103692)

.../log/bdetect' created by bdetect.php - it contains information about extra boards в) Failed for all channel: "bus 353-359 or all the other buses" don't work properly.

...deo/FPGA memory, to the sensor, to the optional 10359 and 10369 'daughter' boards. It can also be configured to reflash the existing camera firmware, or fla cp -R ../353/* .

== boards == All the separate camera components are listed on this [[353#Modules_for_the_353.2F363_series_cameras | page]].

...n) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in mul These boards are compatible with the [[10393]] camera system board.

10353 processor board is the computer part of the [[353|Elphel 353/363 series cameras]]. ...hardware interfaces with the following of them used/connected in the Model 353:

** one Elphel 353 connected to the POE switch and by serial console to the PC for debugging Different models or combinations of boards can be connected to the switch.

...project, so we expect in the near future to have requests for development boards. Testing of the Elphel model 353 camera performed by Communication Certification Laboratory (CCL) has found

|valign='top'|[[File:10393_boards_assembly.png|thumb|265px|Fig.1b Boards connections (NC393-F-CS)]] * parsedit.php and autocampars.php were ported from 353 camera series. There are a few changes from the originals related to 4x sen

|+ Elphel Model 353 price list (MSRP) | 353-07-33<br>