Search results

Jump to: navigation, search

Page title matches

  • Elphel393 series cameras have built-in USB to serial converter which allows users to
    2 KB (356 words) - 22:52, 30 January 2021
  • ...pt which is executed during system boot. The script is located in the /etc/elphel393 directory and called ''init_elphel393.py''. There is a set of parameters wh root@elphel393:~# ls -l /var/volatile/state/
    6 KB (876 words) - 20:30, 19 March 2017

Page text matches

  • == Elphel393 series cameras == The functionality of ''camogm'' has been updated in Elphel393 series of cameras. The new version of the program can write data to a raw d
    24 KB (3,757 words) - 11:47, 16 June 2017
  • ...of video or images to internal or external storage just from your browser. Elphel393 series cameras support recording in two modes: normal recording to a file s
    14 KB (2,145 words) - 12:34, 11 January 2017
  • <font size=2>elphel393~# /usr/bin/str</font>
    8 KB (969 words) - 11:33, 13 March 2019
  • * ''elphel393/bootable-images/mmc/devicetree.dtb'' - mount rootfs from mmc partition * ''elphel393/bootable-images/nand/devicetree.dtb'' - mount rootfs from NAND flash
    5 KB (759 words) - 10:30, 16 September 2020
  • git clone -b master https://github.com/Elphel/meta-elphel393.git meta-elphel393 cd meta-elphel393; git checkout fcde04fa6f4f00c7fe593e5f96bf7b40dc50d2b3; cd ..
    15 KB (2,110 words) - 15:47, 28 January 2016
  • ...ces/amba.0/e0004000.ps7-i2c/i2c-0/0-0070" # device sysfs root directory in elphel393 camera root@elphel393:/sys/devices/amba.0/e0004000.ps7-i2c/i2c-0/0-0070# cat outputs
    37 KB (5,974 words) - 14:50, 16 December 2013
  • [[Category:Elphel393]]
    2 KB (286 words) - 16:53, 15 November 2018
  • root@elphel393:~# cd /sys/devices/soc0/elphel393-sensor-i2c\@0/ root@elphel393:~# cd /usr/local/verilog/; test_mcntrl.py @hargs-after
    3 KB (526 words) - 12:44, 3 August 2018
  • * Use files from '''elphel393/bootable-images/elphel393/nand/''' # NOT NEEDED: ubimkvol /dev/ubi0 -N elphel393-rootfs -s 256MiB
    4 KB (627 words) - 10:45, 25 January 2017
  • ...rgets are built in poky use files from '''.../poky/build/tmp/deploy/images/elphel393/mmc/''': [[Category:Elphel393]]
    1 KB (228 words) - 11:47, 12 January 2017
  • ...gg'' will be used here as an example. This library will be added to ''meta-elphel393'' layer and we will apply a couple of patches to it. ...All we need to do is create ''libogg_1.3.2.bbappend'' file in ''meta/meta-elphel393/recipes-multimedia/libogg'' directory and add the following lines to the fi
    2 KB (298 words) - 12:17, 5 May 2016
  • * The default IP address is set in the ''/etc/elphel393/init_elphel393.py''. ...e=Using_minicom_to_connect_to_Elphel393_camera Using minicom to connect to Elphel393 camera]
    22 KB (3,307 words) - 13:54, 28 September 2020
  • Elphel393 series cameras have built-in USB to serial converter which allows users to
    2 KB (356 words) - 22:52, 30 January 2021
  • ...pt which is executed during system boot. The script is located in the /etc/elphel393 directory and called ''init_elphel393.py''. There is a set of parameters wh root@elphel393:~# ls -l /var/volatile/state/
    6 KB (876 words) - 20:30, 19 March 2017
  • [ 0.132434] elphel393-init: Set up the mio pin 49 and reset USB [ 1.530584] elphel393-pwr elphel393-pwr@0: Probing elphel393-pwr
    18 KB (2,014 words) - 15:04, 15 June 2016
  • ...ing on the initialized ports the configuration files are stored in '''/etc/elphel393/''': http://192.168.0.9/autocampars.php?sensor_port=0 -> /etc/elphel393/autocampars0.xml
    3 KB (388 words) - 09:08, 27 September 2018
  • bootargs = "cma=336M console=ttyPS0,115200 root=ubi0:elphel393-rootfs rw ip=192.168.0.9 earlyprintk rootwait rootfstype=ubifs ubi.mtd=4,20 ** Modify env commands in the u-boot (in elphel393.h or when in the u-boot command line)
    6 KB (994 words) - 13:11, 18 July 2019
  • root@elphel393:~# /usr/local/bin/x393sata_control.py
    2 KB (279 words) - 17:22, 20 December 2016
  • root@elphel393:~# x393sata.py root@elphel393:~# camogm_test -d /dev/sda2 -b 3000000 -c 1000
    3 KB (417 words) - 11:18, 2 October 2017
  • cd elphel393 git remote -v (make sure it's not https://git.elphel.com/Elphel/elphel393.git already)
    780 bytes (122 words) - 17:58, 19 March 2017

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)