Difference between revisions of "Talk:10338"

From ElphelWiki
Jump to: navigation, search
Line 1: Line 1:
[[Image:10338-purple-image.jpg]]
+
--[[User:Andrey.filippov|Andrey.filippov]] 16:49, 3 December 2007 (CST)[[Image:10338-purple-image.jpg]]
  
 
Several of our 10338 sensors are producing images of this nature (single purple-ish color.)
 
Several of our 10338 sensors are producing images of this nature (single purple-ish color.)
Line 12: Line 12:
  
 
--[[User:Ekratzer|Ekratzer]] 11:18, 3 December 2007 (CST)
 
--[[User:Ekratzer|Ekratzer]] 11:18, 3 December 2007 (CST)
 +
 +
What cable length are you using? It looks like the signal phase is wrong. You may try &byr=0..3 in ccam.cgi parameters, but that is just to verify the problem, to fix it you'll need to adjust that phase (see [[Adjusting_sensor_clock_phase]])--[[User:Andrey.filippov|Andrey.filippov]] 16:49, 3 December 2007 (CST)

Revision as of 15:49, 3 December 2007

--Andrey.filippov 16:49, 3 December 2007 (CST)10338-purple-image.jpg

Several of our 10338 sensors are producing images of this nature (single purple-ish color.)

Some of the sensors produce this type of image 100% of the time, others 50% of the time (after reboots), and still others work fine.

I have tested with 7.1.5 from sourceforge and (as of today 2007-12-03) the latest from CVS with the same results.

Is this a bad sensor? Has anyone seen this behaviour?

(note: the lens is a fisheye.)

--Ekratzer 11:18, 3 December 2007 (CST)

What cable length are you using? It looks like the signal phase is wrong. You may try &byr=0..3 in ccam.cgi parameters, but that is just to verify the problem, to fix it you'll need to adjust that phase (see Adjusting_sensor_clock_phase)--Andrey.filippov 16:49, 3 December 2007 (CST)