Difference between revisions of "Test Tasks"

From ElphelWiki
Jump to: navigation, search
m
m (2. ERS Correction)
Line 15: Line 15:
  
 
====2. ERS Correction====
 
====2. ERS Correction====
Our sensor is Aptina's [http://www.aptina.com/products/image_sensors/mt9p006i12stc/ MT9P006] - CMOS, 5MP, 1/2.5". It has an ERS ([http://en.wikipedia.org/wiki/Rolling_shutter Electronic Rolling Shutter]) - the image scan time is about 1/15 s (~66 ms) while IMU samples data at 2.460 kHz (T = 0.406 ms) which makes it possible to reconstruct how the camera moved during the image acquisition and correct the ERS effect by placing each pixel according to the sensor orientation at each moment of time. This only corrects the movement/rotation of the camera but not the ERS from the moving objects.
+
Our sensor is Aptina's [http://www.aptina.com/products/image_sensors/mt9p006i12stc/ MT9P006] - CMOS, 5MP, 1/2.5". It has an ERS ([http://en.wikipedia.org/wiki/Rolling_shutter Electronic Rolling Shutter]) - the image scan time is about 1/15 s (~66 ms) while IMU samples data at 2.460 kHz (T = 0.406 ms) which makes it possible to reconstruct how the camera moved during the image acquisition and correct the ERS effect by placing each pixel according to the sensor orientation at each moment of time. This only corrects the movement/rotation of the camera but not the ERS effect from the fast moving objects.
  
 
===Test Task 1: Parsing Data===
 
===Test Task 1: Parsing Data===

Revision as of 11:04, 14 September 2012

Area: IMU Data Processing

About

"An Inertial Measurement Unit (IMU) is an electronic device that measures and reports on a craft's velocity, orientation, and gravitational forces, using a combination of accelerometers and gyroscopes, sometimes also magnetometers..." © Wikipedia

We use ADIS16375 (fully compatible with ADIS16488) with a tri-axis gyroscope and a tri-axis accelerometer.

IMU, ADIS16375 in NC353L-369 camera
IMU in Eyesis4π
Positive rotation angles in the calibration machine

Our projects

1. Images Relative Orientation

The goal is to find how the camera rotated/moved (Rotation Matrix) between the shots. Knowing the images' relative orientation allows to use this information for further 3D reconstruction.

2. ERS Correction

Our sensor is Aptina's MT9P006 - CMOS, 5MP, 1/2.5". It has an ERS (Electronic Rolling Shutter) - the image scan time is about 1/15 s (~66 ms) while IMU samples data at 2.460 kHz (T = 0.406 ms) which makes it possible to reconstruct how the camera moved during the image acquisition and correct the ERS effect by placing each pixel according to the sensor orientation at each moment of time. This only corrects the movement/rotation of the camera but not the ERS effect from the fast moving objects.

Test Task 1: Parsing Data

Test Task 2: Finding IMU Parameters

Test Task 3: Finding the camera orientation

Test Task 4: Reconstructing camera rotation during the sensor scan

Links