Video API Extensions legacy

From ElphelWiki
Revision as of 04:13, 1 December 2006 by Dvdkhlng (talk | contribs)
Jump to: navigation, search

in English | [[{{{de}}}|deutsch]] | [[{{{fr}}}|français]] | по-русски | автоперевод | 中文版 | 机械翻译


The current implementation of the Video API has a number of features which are absent from the standard Axis Video API.


Enabling extensions

By default the Video API extensions are blocked. To unblock them it is necessary to set a corresponding variable:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=update&ElphelExtensions.Enabled=yes


Obtaining static and dynamic images

The standard interface for obtaining static and dynamic images in JPEG and MJPG formats has a few additional parameters.

e_dcm_hor - horizontal decimation (resolution/image size reduction)
e_dcm_vert - vertical decimation (resolution/image size reduction)
e_bin_hor - horizontal binning (sensitivity for lower resolution)
e_bin_vert - vertical binning (sensitivity for lower resolution)
e_woi_width - sensor active window width (before decimation)
e_woi_height - sensor active window height (before decimation)
e_woi_left - sensor active window left margin (before decimation)
e_woi_top - sensor active window top margin (before decimation)
e_virt_width - virtual frame width
e_virt_height - virtual frame height
e_fliph - flip (mirror) image horizontally (uses in-sensor capabilities)
e_flipv - flip (mirror) image vertically (uses in-sensor capabilities)
e_exp_time - exposure time (0.1 msec step)
e_gamma - gamma correction value (%)
e_pixel_low - black level
e_pixel_high - white level
e_saturation_blue - color Saturation (%), Blue
e_saturation_red - color Saturation (%), Red
e_gain_r - analog gain RED (or mono)
e_gain_g - analog gain GREEN (or green in "red" line)
e_gain_b - analog gain BLUE
e_gain_gb - analog gain GREEN in "blue" line)
e_spec_kac_gga - Kodak KAC1310 analog gain Y (all colors)
e_spec_kac_ggb - Kodak KAC1310 analog gain ? (all colors)
e_spec_kac_ggm - Kodak KAC1310 mode

Examples

Example of obtaining a static image - use the following parameters:

http://192.168.0.9/axis-cgi/jpg/image.cgi?e_dcm_hor=2&e_dcm_vert=2&e_woi_width=1000&e_woi_height=900&e_woi_left=600

Example of obtaining a dynamic image (MPJPG) - use the following parameters:

http://192.168.0.9/axis-cgi/mjpg/video.cgi?e_dcm_hor=2&e_dcm_vert=2&e_woi_width=1000&e_woi_height=900&e_woi_left=600

You can play this videostream, for example, by using MPlayer (for a more detailed description see Using Mplayer With Video API):

$mplayer -demuxer lavf "http://192.168.0.9/axis-cgi/mjpg/video.cgi?e_dcm_hor=2&e_dcm_vert=2&e_woi_width=1000&e_woi_height=900&e_woi_left=600&bogus.mjpg"

If any of the parameters are not specified, the default values are used. You can find these values at the address:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=list&group=ImageSource.I0.Sensor

Note: All API extensions have the prefix "E_".

You can change the default value in the standard way for the Axis Video API. For example:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=update&ImageSource.I0.Sensor.E_DcmHor=1

Obtaining information about the system status and default values

To obtain information about the system status variable you must use the following path:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=list&group=ImageSource.I0.E_CurrentState

In an addition to the standard "rfc" format there is also the possibility to use XML format. You must use the responseformat parameter for this. For example:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=list&group=ImageSource.I0.E_CurrentState&responseformat=xml

Note. If the responseformat is not specified or specified incorrectly, the default value of "rfc" will be used.


Video streaming: RTP/MJPG and RTP/Theora

The Elphel cameras can transfer the video stream by RTP protocol.

RTP/MJPG

RTP/Theora

Exposure control

The Elphel cameras support the standard and advanced exposure control interface. For the standard settings see Video_API

To enable autoexposure it is necessary to use the following command:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=update&ImageSource.I0.Sensor.Exposure=auto

Enabling the manual control of exposure:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=update&ImageSource.I0.Sensor.Exposure=manual

Obtaining the exposure state:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=list&group=ImageSource.I0.E_CurrentState.E_Exposure

Window settings:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=update&ImageSource.I0.Sensor.E_Exposure.WinWidth=30&ImageSource.I0.Sensor.E_Exposure.WinHeight=45&ImageSource.I0.Sensor.E_Exposure.WinLeft=10&ImageSource.I0.Sensor.E_Exposure.WinTop=20

Exposure max.values:

http://192.168.0.9/axis-cgi/admin/param.cgi?action=update&ImageSource.I0.Sensor.MaxExposureTime=3000&ImageSource.I0.Sensor.E_Exposure.OverMax=30