Difference between revisions of "Zynq development issues"

From ElphelWiki
Jump to: navigation, search
(device-tree)
Line 23: Line 23:
 
   viewport = <0x170>;
 
   viewport = <0x170>;
 
  } ;
 
  } ;
 +
 +
===.config===
 +
CONFIG_USB_ULPI=y
 +
CONFIG_USB_ULPI_VIEWPORT=y
 +
CONFIG_USB_CHIPIDEA_DEBUG=y
 +
CONFIG_USB_GPIO_VBUS=n
 +
CONFIG_USB_OTG=n
 +
CONFIG_USB_GADGET=n
  
 
==from dmesg==
 
==from dmesg==

Revision as of 19:23, 12 April 2016

Config

kernel

4.0 (linux-xlnx 468329e7fac2b22e76897fbd40532cc0884ded2a)

device-tree

...
  ps7_usb_0: ps7-usb@e0002000 {
    clocks = <&clkc 28>;
    compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
    reg = <0xe0002000 0x1000>;
    interrupt-parent = <&ps7_scugic_0>;
    interrupts = <0 21 4>;
    dr_mode = "host";
    phy_type = "ulpi";
    usb-phy = <&usb_phy0>;
  } ;
  ...
} ;
...
usb_phy0: phy0{
  compatible = "ulpi-phy";
  #phy-cells = <0>;
  reg = <0xe0002000 0x1000>;
  viewport = <0x170>;
} ;

.config

CONFIG_USB_ULPI=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_CHIPIDEA_DEBUG=y CONFIG_USB_GPIO_VBUS=n CONFIG_USB_OTG=n CONFIG_USB_GADGET=n

from dmesg

[    1.035759] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.042319] usbcore: registered new interface driver usb-storage
[    1.073619] e0002000.ps7-usb supply vbus not found, using dummy regulator
[    1.103560] Registering platform device 'ci_hdrc.0'. Parent at e0002000.ps7-usb
[    1.114806] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, revision: 22, lpm: 0; cap: f00d4100 op: f00d4140
[    1.136023] ci_hdrc ci_hdrc.0: unable to init phy: -110
[    1.141232] ci_hdrc: probe of ci_hdrc.0 failed with error -110

problem 1: vbus not found

reason?

Links