-
...ill allow simple access to the camera, by visiting the cameras IP-address (default: 192.168.0.9) with a web-browser.
7 KB (1,201 words) - 09:17, 22 December 2008
-
By default the camera runs telnetd. Login "root", password "pass". You can telnet to t
The factory default MAC address of Elphel products is the same as the serial number which begin
22 KB (3,447 words) - 21:22, 16 February 2017
-
...actory default setting is 10 fps from internal trigger while 353's factory default is free run mode.
9 KB (1,360 words) - 15:40, 30 January 2018
-
Press Enter or wait longer for the default configuration.
<dt>knoppix<dd>Default mode.
9 KB (1,390 words) - 16:39, 24 August 2008
-
...-wl byte write lock bits (0xFF - not lock programming and reading(by default); 0xFE - programming disable, reading enable; 0xFC - programming disable, r
...write lock bits (0xFF - not lock programming and reading(by default); 0xFE - programming disable, reading enable; 0xFC - programming disable, r
2 KB (327 words) - 19:42, 23 February 2006
-
...of the output signal. Sensors have different modes of auto-zero, and with default settings MT9T001 sensor adjusts black level so in the complete darkness eac
...he left active window boarder to the left of histogram calculation window, default=0
25 KB (3,953 words) - 23:08, 23 February 2008
-
..._servers/dev/cam_http_api_2.htm#api_blocks_general_factory_default Factory default] ====
...ev/cam_http_api_2.htm#api_blocks_general_hard_factory_default Hard factory default] ====
10 KB (1,542 words) - 16:43, 24 August 2008
-
...Linux with telnetd, everything camera specific should run from init 5. The default level will be 5, but ktest should be able to pass init=3 to the kernel.
4 KB (737 words) - 09:27, 19 July 2008
-
...l minutes. Afterwards they will go off and the camera will reboot with its default IP address of 192.168.0.9
3 KB (441 words) - 11:24, 28 November 2007
-
...} :- object color while loadining: 0 - black, 1 - white, -1 - mozilla default (gray).
6 KB (1,062 words) - 22:46, 17 April 2007
-
...ify the option "-r" (FPS), in other case the avi-file will be created with default FPS and this value can be very different from the original live video strea
1 KB (233 words) - 14:36, 23 December 2005
-
By default the Video API extensions are blocked. To unblock them it is necessary to se
If any of the parameters are not specified, the default values are used. You can find these values at the address:
5 KB (798 words) - 16:43, 24 August 2008
-
Some default parameters and some which are transferred when the image is obtained can ch
'''Note''' 192.168.0.9 - this is the default camera IP-address. If you have changed the camera IP-address, please, type
13 KB (1,916 words) - 16:42, 24 August 2008
-
'''Bold''' are the default values
2 KB (255 words) - 11:42, 13 January 2006
-
query "Enter default language" us
15 KB (2,238 words) - 13:38, 9 January 2008
-
rm -f $source/KNOPPIX/usr/share/apps/ksplash/Themes/Default/splash_bottom.png
rm -f $source/KNOPPIX/usr/share/apps/ksplash/Themes/Default/splash_top.png
7 KB (1,019 words) - 07:53, 17 March 2006
-
LANG=us - default language for Knoppix
2 KB (363 words) - 07:48, 27 March 2006
-
The camera will automatically be setup for unicast streams by default.
3 KB (428 words) - 22:52, 8 June 2009
-
...] API and the old [[Video API]] which is a superset of the [[AxisAPI]]. By default (after flashing), Elphel cameras (at least the 333 model) work in the [[cca
1 KB (196 words) - 00:55, 14 August 2008
-
* [-d ethX] - network interface to camera, by default, eth0
* ip=xxx.xxx.xxx.xxx - temporary ip for the camera (by default, 192.168.0.9)
2 KB (325 words) - 11:42, 16 January 2012
