Difference between revisions of "Cammkv"
From ElphelWiki
OneArtPlease (talk | contribs) (Created page with "=About= cammkv is an alternative (to camogm) camera internal harddisk video recorder that uses a Matroska container (camogm uses quicktime). Not all features from camogm ar...") |
OneArtPlease (talk | contribs) |
||
Line 5: | Line 5: | ||
Not all features from camogm are implemented yet. | Not all features from camogm are implemented yet. | ||
+ | =Release= | ||
+ | [[File:Cammkv_new.tar.gz]] | ||
+ | |||
+ | ==Install Instructions== | ||
+ | First transfer the Cammkv_new.tar.gz file to your camera via FTP to an empty directory (the guide assumes you use /var/test) | ||
+ | |||
+ | Then log in to the camera via ssh/telnet: | ||
+ | |||
+ | cd /var/test | ||
+ | tar -xzf Cammkv_new.tar.gz | ||
− | = | + | define variables |
+ | export LD_LIBRARY_PATH=/var/test | ||
+ | export LIBQUICKTIME_PLUGIN_DIR=/var/test | ||
+ | |||
+ | start cammkv as | ||
+ | ./cammkv cammkv.pipe | ||
+ | |||
+ | Login on another terminal (ssh/telnet) and do: | ||
+ | cd /var/test | ||
+ | echo 'debuglev=3' >cammkv.pipe | ||
+ | |||
+ | You MUST set prefix: | ||
+ | echo 'prefix=/var/hdd/' >cammkv.pipe | ||
+ | |||
+ | Set output format for video | ||
+ | echo 'format=mov' >cammkv.pipe or | ||
+ | echo 'format=mkv' >cammkv.pipe (used by default) | ||
+ | |||
+ | You can on/off audio if need | ||
+ | echo 'audio=off' >cammkv.pipe or | ||
+ | echo 'audio=on' >cammkv.pipe | ||
+ | |||
+ | start recording | ||
+ | echo 'start' >cammkv.pipe | ||
+ | |||
+ | stop recording | ||
+ | echo 'stop' >cammkv.pipe | ||
=Source= | =Source= | ||
[[File:Cammkv-0.9.0.tar.gz]] | [[File:Cammkv-0.9.0.tar.gz]] | ||
− | |||
− |
Latest revision as of 07:15, 17 October 2011
Contents
About
cammkv is an alternative (to camogm) camera internal harddisk video recorder that uses a Matroska container (camogm uses quicktime).
Not all features from camogm are implemented yet.
Release
Install Instructions
First transfer the Cammkv_new.tar.gz file to your camera via FTP to an empty directory (the guide assumes you use /var/test)
Then log in to the camera via ssh/telnet:
cd /var/test tar -xzf Cammkv_new.tar.gz
define variables
export LD_LIBRARY_PATH=/var/test export LIBQUICKTIME_PLUGIN_DIR=/var/test
start cammkv as
./cammkv cammkv.pipe
Login on another terminal (ssh/telnet) and do:
cd /var/test echo 'debuglev=3' >cammkv.pipe
You MUST set prefix:
echo 'prefix=/var/hdd/' >cammkv.pipe
Set output format for video
echo 'format=mov' >cammkv.pipe or echo 'format=mkv' >cammkv.pipe (used by default)
You can on/off audio if need
echo 'audio=off' >cammkv.pipe or echo 'audio=on' >cammkv.pipe
start recording
echo 'start' >cammkv.pipe
stop recording
echo 'stop' >cammkv.pipe