Format SSD MMC: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
Help tips for formatting: | Help tips for formatting: | ||
* SSD (internal or external) | * SSD (internal or external) | ||
* MMC (& | * MMC (μSD card - normal or recovery) | ||
* USB drive | * USB drive | ||
| Line 10: | Line 10: | ||
* '''mkfs.vfat''' - create filesystem | * '''mkfs.vfat''' - create filesystem | ||
* '''dd''' - clean filesystem from the partition for '''fast recording''' | * '''dd''' - clean filesystem from the partition for '''fast recording''' | ||
==<font color="blue">SSD or USB</font>== | ==<font color="blue">SSD or USB</font>== | ||
===camera=== | ===camera=== | ||
* (not needed for USB) Check if SSD is connected to the camera: | |||
** The default connection is ''camera <=> internal SSD'' | |||
** For external drive set: ''camera <=> external SSD'' and power on the drive. | |||
** [[Sata_multiplexer_10389| '''More info''']] | |||
* Find out the device name: | * Find out the device name: | ||
$ dmesg | $ dmesg | ||
| Line 27: | Line 29: | ||
===pc=== | ===pc=== | ||
The same as above | The same as above except: | ||
* For internal SSD the connection should be set to ''pc <=> internal SSD'' | |||
==<font color="blue">MMC</font>== | ==<font color="blue">MMC</font>== | ||
| Line 67: | Line 68: | ||
==<font color="blue">Useful links</font>== | ==<font color="blue">Useful links</font>== | ||
* [https:// | * [https://git.elphel.com/Elphel/elphel-tools-update git:elphel-tools-update] - '''write_bootable_mmc.py''' | ||
** the script is used to create a bootable MMC from a PC (the camera doesn't have ''parted'' and ''kpartx'' installed) | ** the script is used to create a bootable MMC from a PC (the camera doesn't have ''parted'' and ''kpartx'' installed) | ||
** it has examples of using '''dd''', '''parted''', '''mkfs''', '''kpartx''' | ** it has examples of using '''dd''', '''parted''', '''mkfs''', '''kpartx''' | ||
Latest revision as of 18:23, 26 June 2017
About
Help tips for formatting:
- SSD (internal or external)
- MMC (μSD card - normal or recovery)
- USB drive
Can be done either from the camera or PC, the required programs are:
- fdisk - format into partitions
- mkfs.ext4 - create filesystem
- mkfs.vfat - create filesystem
- dd - clean filesystem from the partition for fast recording
SSD or USB
camera
- (not needed for USB) Check if SSD is connected to the camera:
- The default connection is camera <=> internal SSD
- For external drive set: camera <=> external SSD and power on the drive.
- More info
- Find out the device name:
$ dmesg
- Check if it is already partitioned:
$ cat /proc/partitions
- manage partitions:
$ fdisk /dev/sda
- format a partition for file storage:
$ mkfs.ext4 /dev/sda1
- for fast recording
- Do not make a file system on the partition
pc
The same as above except:
- For internal SSD the connection should be set to pc <=> internal SSD
MMC
camera
Make sure the camera is not boot from the MMC - in MMC boot by default the camera gets the boot files from /dev/mmcblk0p1 (FAT32) and mounts /dev/mmcblk0p2 (EXT4) as /.
- check boot mode:
$ mount | grep " / "
- check existing paritions:
$ cat /proc/partitions
- manage partitions:
$ fdisk /dev/mmcblk0
- format a partition for file storage:
mkfs.ext4 /dev/mmcblk0pX
pc
- Same as above except the MMC might be detected as /dev/sdX
- If MMC is for boot the partition table type must be msdos, not gpt
'Erase' a file system from a partition
Sometimes there is a need to this:
- if the drive was partitioned several times and the old file system journal starts from a location of a new partition - the file system will surely show up.
- by accident
Examples:
- Use dd:
- 'Erase' a filesystem from /dev/sda1
$ dd if=/dev/zero of=/dev/sda bs=1MB count=1 seek=1
- 'Erase' a filesystem on /dev/sda2, if /dev/sda1 size is SIZE MB:
$ dd if=/dev/zero of=/dev/sda bs=1MB count=1 seek=SIZE
- To erase the drive's partition table (better use fdisk):
$ dd if=/dev/zero of=/dev/sda bs=512 count=2
Useful links
- git:elphel-tools-update - write_bootable_mmc.py
- the script is used to create a bootable MMC from a PC (the camera doesn't have parted and kpartx installed)
- it has examples of using dd, parted, mkfs, kpartx
- MMC boot
- prepare a bootable μSD card and boot