Difference between revisions of "10393 power"

Revision as of 13:05, 12 January 2018

Fig.1 power through J3 connector

Fig.2 power through J4 connector

camera's DC-DC converter installed: TRACO POWER THD 12-4810WI, IN 18-75V, OUT 3.3V/3500mA

camera's DC-DC converter installed: TRACO POWER THD 12-2410WI, IN 9-36V, OUT 3.3V/3500mA

For 12V the recommended connector is J4 - bypassing diodes reduces voltage drop and the chances of not hitting the lower voltage limit are higher.
For 18+ V the recommended connector is J3

AC/DC WALL MOUNT ADAPTER

Fig.3 10393 (J1) and cable, see schematics

Fig.4 Any side can be used

Fig.5 Power supply

Power from any battery output voltage ranging 12-36V.

Power from any battery output voltage ranging 18-75V.

Example setup and cables for 48V:

ANTY BATTERY 48V 4A([ANTY or BOOANT]).
Power cable with an inline fuse and a switch. Is used to power the camera
Cable with a 48-to-12v converter (CUI INC PYB15-Q48-S12). It was used to power an extra network switch which might not be needed.
The camera was connected to a laptop running on its own battery.

@@ Line 27: / Line 27: @@
 |valign='top'|[[File:10393 power33 3.jpeg|thumb|320px|Fig.5 Power supply]]
 |}
+==Powering from batteries==
+===12V setup===
+Power from any battery output voltage ranging 12-36V.
+===48V setup===
+Power from any battery output voltage ranging 18-75V.
+Example setup and cables for 48V:
+* ANTY BATTERY 48V 4A([ANTY or BOOANT]).
+* Power cable with an inline fuse and a switch. Is used to power the camera
+* Cable with a 48-to-12v converter ([https://www.digikey.com/product-detail/en/cui-inc/PYB20-Q48-S12-DIN/102-3224-ND/4477482 CUI INC PYB15-Q48-S12]). It was used to power an extra network switch which might not be needed.
+* The camera was connected to a laptop running on its own battery.
 [[Category:393]]